Question about 2006 Peugeot 405

2 Answers

Windscreen washer wont work in my 207 (56 plate)

No sound at all coming from the motor, havent got a handbook so i cant even find the right fuse!!! help!!!

Posted by on

  • DeBoyWonder May 11, 2010

    What yearis the car?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I HAVE A 2007 207.THE FUSE BOX IS LOCATED ON THE RHS OF THE ENGINE COMPARTMENT.FUSE NO 3 10AMP.I REPLACED FUSE ON MINE AND WORKED FOR A COUPLE OF DAYS AND PACKED IN AGAIN.AM HAVING IT DONE TOMORROW UNDER WARRANTEE 13/1/09.THIS APPEARS TO BE A COMMON PROBLEM

Posted on Jan 12, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My cigarette lighter won't work which means that I can't use a GPS. Any solutions?

Posted on Apr 27, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No motor sound from windscreen washer


check your watcher motor with a torch .if motor is running .and water not frozen. then a blocked washer nipple push a pin in it.

Dec 21, 2013 | 2004 Ford Focus

1 Answer

Windscreen washer not working


Most likely the pump (motor) is gone and needs replacement. However, it is worth checking that fuse allocated to windscreen washer is intact. Furthermore, you may also need to check the wiring for flow of current at lever end (handle on the steering wheel) and wires connecting to pump on the water reservoir.

Jul 26, 2013 | Mitsubishi Colt Cars & Trucks

1 Answer

Intermittent horn/ jet spray not working


As far as the horn goes it sounds like the horn is bad sometimes works and sometimes not, the washers may have a bad washer pump, you will need to locate the washer bottle, this is the bottle that you fill with window washer fluid, at the bottom of the bottle is a pump, you will need to first make sure the plug that connects to the washer pump is not corroded or loose if it is okay then replace the pump, a sure test would be to use a testlight and test for power and ground to pump while someone hits the wash button, but i can tell you this. if the wipers work then it will not be a fuse problem, it will be a bad motor or connection, the pump will pull right out of bottle and new one will pop in,

Jun 09, 2013 | Kia Cars & Trucks

1 Answer

Windscreen washers on 03 plate Citroen berlingo not working


Just fit a new pump ,but before you buy a new one connect the wires to the pump to a multimeter or a light and see if you have power as often the head unit on the steering column packs up .

Apr 12, 2013 | Citroen Berlingo Cars & Trucks

1 Answer

Windscreen washer on my renault megane 1999 doesnt work even though the motor is fine


try a fine needle and clean jets at screen .i find a strand out of a wire brush great for cleaning them

Oct 23, 2012 | Cars & Trucks

1 Answer

Windshield wipers stopped working. Looking for fuse and/or motor for wipers. Could you tellme where they are located.


The main fuse box is under the steering column near the hood release. The wiper motor is above the firewall in the engine compartment just below the windscreen.
The fuse must be in the main fuse box. The position and function of the fuses is normally marked on the inside of the fuse box cover and also in the owner's handbook. If you don't come right with these, work your way through the fuses looking for a blown one. To ease your search the wiper fuse it should be around 15 to 20 amps.

Mar 09, 2011 | 1994 Toyota Camry

1 Answer

Replacing fuse for windscreen wipers fuse box diagram required


The fuse must be in the main fuse box. The position and function of the fuses is normally marked on the inside of the fuse box cover and also in the owner's handbook. If you don't come right with these, work your way through the fuses looking for a blown one. To ease your search the wiper fuse it should be around 15 to 20 amps.

Mar 03, 2011 | 2007 Ford Focus (3 Door) Hatchback

2 Answers

Windshield washers wont work ..Can't find fuse for washers


there is no fuse the switch or washer mottor went bad pull the motor out and hook it up to a battery if it comes on its your switch if not just replace the motor

Mar 09, 2010 | 2001 Ford Focus

3 Answers

Peugeot 1007 windscreen washer water jets


Hi

It is usually the fuse. This blows very easily.(eg Ifyou operaten the washers when the fluid is frozen or partially frozen)

Look in your handbook. And in the fuse box in the engine compartment

Regards

Vince

Jun 11, 2009 | 2006 Peugeot 405

Not finding what you are looking for?
Cars & Trucks Logo

2,986 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Wahs Team

Level 2 Expert

205 Answers

yadayada
yadayada

Level 3 Expert

63990 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...