- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Well I believe that only upholstery can fix that but the whole seat comes off. What seems to be the problem? It would be cheaper, only if your budget is tight, if you get another one from a pick a part near you.
using a flat blade tool like a small flat blade screwdriver, release retaining clip on arm rest and pull armrest from seat. slip the screwdriver between seat back and armrest and pry up on the retaining clip.
Try this remove the ckt breaker for the power seats the ckt breaker is located in the fuse box inside down by the drivers left foot. leave breaker out for about 10 seconds then reinstall it and see if the seat starts moving. If it does there is a reprogram for this and needs to be done by a dealer or someone who has access to be able to reprogram your vech.
several things could cause your heated seats to not work. If the seat and heated seat seat stopped at the same time could be the reprogram could fix it. If the heated seat quit working at a differant time it could be the seat heater element. get a schematic of the heated seat and ohm the wires for the element. If either element tests open then the element will need to be replaced. You might as well replace both of them at the same time since the seat covers have to come off to replace the seat heaters.(back and bottom ) If one element is bad then both heaters quit working.
Location of the spare tire and tools
The spare tire and tools for your vehicle are stowed in the following
Spare tire Under the vehicle, just forward of
the rear bumper
Jack assembly Under the third row bench seat in
the tool bag
Removing the jack and tools
1. Lift the 3rd row seat cushion.
2. Remove the jack assembly from the bag under the seat.
Removing the spare tire
1. Open the liftgate, locate the U-shaped slits in the carpet, and flip up
the piece of carpet to expose the hex nut.
2. Insert the lug nut wrench on the
hex nut in cargo floor.
3. Turn the wrench
counterclockwise until tire is
lowered to the ground and the cable
is slightly slack.
4. Remove the retainer from the
spare tire. It may be necessary to
lift one end of the tire to disengage