Cant find the transmission fill on a 01 jeep grand cherokee

See the link

https://www.google.com/search?q=program+keyless+remote+for+01+jeep+cherokee+grand

..

did you scan it yet, to see all those DTC errors from trannY?

yeah, you should take a cheap OBD2 code scanner to have a check.

If this is an automatic trans you will fill it through the trans dipstick with a trans funnel. Or any funnel you can get in to it.

I also have one 93 GC 5.2L V8 (great SUV); check in the rear center of the engine, between the distributor and the firewall...



Also, its possible that yu are interesting in the Jeep 1993-1998 ZJ Grand Cherokee (english)

Hope help with this (remember rated this help).

If it is an automatic,fill it threw the dip stick for the transmission.

check to see if your fluid is low or burnt. if it is low then just add enough to cover the fill mark on the dipstick. if it is burnt, remove the transmission pan and filter and replace the filter. then add new transmission fluid.

the transmission control module on models with AW-4 OR 42/44RE transmission control module is located under dash on drivers side. to the left of the steering column. on models with the 45RFE transmission it is mounted to a bracket on the left side inner fender panel.

sound like over filled. drain out fluid change fluid and filter put the right amount in it.

Auto transmitions heve a fill tube in the rear of the engine compartment that are usually hidden by hoses. Manual tranmitions do not have a fill tube and have to be filled under the vehicle. There are two plugs. one will be higher than the other. You take out the top one and put your finger in the hole and see if you feel fluid. You fill it up until it starts to come out of the hole and hurry up and put the plug back in.( Be sure theat you put in the proper fluid)