Question about 1995 Ford Crown Victoria

Open Question

Rear driver side window is off track,how do I take the door panel off to fix

My rear driver side window is off track, and I can here the motor running,when I try to raise the window using the switch, but nothing happens. Can you give me detailed instructions on how to remove the door panel,to fix it?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

ilragatzzo78
  • 241 Answers

SOURCE: 99 ford expedition power window

no, you will have to remove the window motor to raise the window up manually.

Posted on May 15, 2008

  • 1 Answer

SOURCE: Front passenger window does not work

sounds like bad regulator, pull your door panel apart and it is the part that goes onto the motor. long bow shaped thing with cable attached. pop out rivets, (I think 3 rivets) and on the upper side there are 2 nuts that have to be removed. then wiggle it around till you can get it out of the biggest hole in door. Good Luck.

Posted on Oct 25, 2008

  • 420 Answers

SOURCE: my driver side power window doesn't work.

Removing a door panel is easy. First locate all of the screws and remove them, some will be hidden under plastic covers. Next take a door panel tool (about $5.00 at a parts store) work it around the panel to find the plastic keepers, carefully pop out the keepers, the keepers will need to be replaced just try not to damage the panel, you can buy need keepers at part stores or even hardware stores.

Posted on Jul 22, 2009

ftw1952
  • 10319 Answers

SOURCE: Passenger window rolls down window but does not roll up

replace the switch. They have parts made of plastic pressing on the contacts softing these babies up making them useless in a few years

Posted on Jan 20, 2010

cobra777
  • 80 Answers

SOURCE: how to remove drivers door panel on 1999 ford escort

Remove the front door pull cup screw 1152a96.gif

Remove the screw cap and the screw from the inside door handle and slide the handle rearward to disengage the hook from the inner sheet metal.

  • Disconnect the inside door handle from the front door latch remote control link
37470b2.gif

Remove the two-piece pushpins from the front door trim panel (23942).
2a1605a.gif

NOTE: Use a commonly available spring loaded trim pad removing tool with a long thin nose to prevent damage to the door trim panel.
Release the seven front door trim panel bullet nose fasteners and push inboard, then upward to release the front door trim panel.
  • If equipped, disconnect the master window regulator control switch electrical connector
cc0d2af.gif

Remove the retainer from the master window regulator control switch panel.
  1. Pull outward on the cup retainer tabs and remove.
  1. Remove the master window regulator control switch electrical connector from the retainer
ab8ff6c.gif

Posted on Jun 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I put the driver side power window back on track and the door panel for my 2003 Nissan Altima 3.5SE?


R/R the inner door panel, slide the window back on track, reconnect the window transmission to the window, (or reinstall the trans) bolt everything back together (window motor, window trans to door etc.) Make sure the window is in the UP position. use the switch to raise the window & keep it up if all is back together before finally installing the door panel ( make sure the switch & other plugs are plugged in before the door panel is reinstalled.) Lights etc. Good luck

Sep 14, 2014 | 2003 Nissan Altima

2 Answers

Why does my 2006 toyota sienna power sliding door not close properly


Could be resistance in one of the tracks, or the motor.
If the motor hits a resistance the door opens in case the resistance is a human.

Jan 13, 2013 | 2006 Toyota Sienna

1 Answer

My drivers side rear window is stuck down. You can hear the motor moving up and down but the window is off track and not catching to come back up. I was wondering how to remove tghe door panel so i can...


I just replaced the window regulator in my deville.Mine was doing the same thing.I found the part online for 35.00.You have to take the door panel off and remove the regulator.That's the metal track that holds the window in place.Once you get inside you disconnect the motor and then the regulator.It is held on by three bolts.Unbolt it from the window (there is two bolts for that)and take out the regulator.Install the new one the same way you took it out and reconnect the motor.Test it before putting it back together.When you unbolt the window and take out the regulator be careful.The window will fall down into the door when you take the two bolts out that hold the window.It's good to have someone with you,but you can do it yourself.The hardest part is getting the door panel off.There is 8 or 9 clips around the door from the sides to the bottom.There are 2 screws in the armrest and one underneath the door handle.be patient and good luck.

Jul 08, 2011 | 2004 Cadillac Deville

1 Answer

How do you replace the window regulator and motor on the driver front side on 98 dodge grand caravan


Remove the two Phillips head screws that hold in the power master switch in the door. Gently pry it upward. Push the red clips aside on the plugs and squeeze the release on the plug and pull them off. Remove the screws from inside the door panel. Lift the panel up and away. Peel back the plastic to reveal the inner door. Duct tape the window over the upper frame a few times to keep in up. Peer inside the door for two metal clips that hold the regulator to the window and slide them out. Unbolt the front and rear vertical tracks that slide the window up and down. Take out the three torx head bolts that come through the door and hold the motor in place. Check tor plastic anchors (ribbed pointy things) that hold the cables (from making noise) going from the front and rear vertical tracks. Twist and wiggle the tracks and motor out the hole at the bottom rear of the door. It's a little stubborn to finagle out, but it'll come. Patience will overcome.

Mar 14, 2010 | 1998 Dodge Caravan

1 Answer

Drivers side door will not go up or down; window is off track and door will not open


Hello. You have two choices here on how to proceed. Often when this occurs, it is a sign that the window motor and the track inside that door are on their "last legs" This assembly is called the power window regulator and it can be found on the net for about $75.00 So, you may either put the window back in the track and hope for the best or you may choose to replace the power window motor and the track, which comes as one unit called a driver's side door power window assembly. Either way, you have to remove the inner door panel to expose the track and the motor and the glass.

Jan 25, 2010 | 2002 Chrysler Concorde

1 Answer

The drivers side rear window does not work. It does side down, and when the power switch is press the motor turns on. could the window be off its track or does the window unit need replaced?


It sounds like the window may be off its track. All that needs to be done is to remove the inner door panel. Be careful to pry the clips very gently. They break easily. However, most auto parts stores carry replacements. Once the door panel is off, remove the plastic sheeting that covers the door frame. It's attached with a mastic adhesive.
Once you have a clear view of the window rail, carefully pull the pane up and set the glass on the track. You may need to apply some silicone in the track to keep the glass in place.

Then, test the alignment by pressing the power button and roll the window up and down. With the window closed, replace the plastic sheeting and the door panel.

That should do it.

Oct 09, 2009 | 1994 Lincoln Town Car

1 Answer

Rear driver's side window is off track. i need to know how to remove the door panel to get back on track. window motor sounds like it is working in both directions 2001 hyundai sonata


Remove the upholster on the door panel. then, loosen the bolt of the window mechanism..and also the bolt of the track of the window, so you can put the window back on its track. then, you can stabilize it by looking for the right adjustment of the mechanism.

Apr 18, 2009 | 2001 Hyundai Sonata

1 Answer

Driver side window is off track and stuck about 75% closed


If your power window motor is not moving up or down at all inside the door panel, you will need a new motor.
If your window is stuck and will not move, it is the motor - it is bad.
If your window falls down into the door panel, the window is off track.
Replacing a window motor is an easy fix, get another one from an auto parts store and replace it.
Good luck!

Mar 12, 2009 | 1993 Honda Accord

1 Answer

Drivers side electric window does not work


Remove the door panel and disconnect the motor from the window, but leave it plugged in. See if the motor works. If it does you should grease the tracks on the window. If the motor does not work then you should replace the motor. The motor will probably get hot when you try working it.

Jan 23, 2009 | 2005 Nissan Xterra

1 Answer

Drivers side widow will not go down more than 2 inches


A) Remove the screws in the following locations:
  1. Door handle
  2. door grip
  3. Middle of panel, 3/4 down the panel from the top
B) Removal of door Handle

  1. Use caution
  2. Slide the door handle in the direction of the motor
  3. The door handle is now freed from the door
C) Partial removal of door panel
  1. Insert a dull instrument into the port that is located on the panel roughly half way down the panel and the side the furthest from engine.
  2. Carefully pry the panel loose.
  3. With your hands, remove the panel by its contour. There are roughly 10 or so plastic plug
D) Tricky Part; Removal of door Handle

  1. Free the door handle from the panel, by carefully pushing it through the panel on an angle...
  2. You can now push the panel up beyond the door lock button.... then...
  3. The wiring haness is now exposed.
E) Wiring Harness

  1. You now un plug the wiring harness from:
  • Door handle
  • Lower courteosy light
  • Electric window controls (three wires)
F) Final steps

  • Lift the panel up and over the door lock button.
Now to your window problem.

When I examined the problem that I had with my Odyssey, I found the following:

  1. Two bolts were missing;
  2. The other tow bolts were lossed;
  3. The motor had shifted positions.





Nov 15, 2008 | 1995 Honda Odyssey

Not finding what you are looking for?
1995 Ford Crown Victoria Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...