Question about Cars & Trucks

Open Question

How to replace fusible link 2004 ford transit

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

betz73
  • 298 Answers

SOURCE: Fusible Links on 1972 Ford F 250 PU

follow the wire where you think the link may be, and and where the large bulge is, is where the link usually is, now the fuse is not usually non-replaceable, so you can go to a parts house and get an aftermarket fuse link that can easily be installed. take the voltage regulator with you and have it tested to insure it was not damaged.
also check all fuses in the fuse box. and the link on the main wire on the back of the alternator.

Posted on Oct 06, 2008

  • 373 Answers

SOURCE: 04 Tahoe blowing fusible link in fuse box for starter

HI...
ON the fuse box cover.
IS there a especification for the funtion of the fuse. or the number of the location of the fuse.
If you can give me, I can try help you. as more I can.

Thank you for use fixya.

Posted on Jul 24, 2008

  • 6982 Answers

SOURCE: Fusible Link

never change a link or fuse with a larger one. It is there to protect the remainder of the system. You need to find out what is wrong and fis that probem.

Posted on Apr 01, 2009

  • 1 Answer

SOURCE: Wire Gauge Fusible Link

Replace the fusible links with ALF fuses, I put 20 amp on each side and a 30 amp in the center

Posted on May 20, 2009

Tnsiouxfalls
  • 617 Answers

SOURCE: reversed jumper cables, blown fusible link?

Turn the key to run,truck in park,and jump the starter from the small wire to the large wire on the starter solinoid.If it starts,all is good and your fussible link is probably right.The fusable links are located in the engine compartment,under a cover on the firewall.

Posted on Jan 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is fusible link located on a 2004 Hyndai Elantra?


There are nine fusible links in the engine compartment relay and fuse box: 120A FUSIBLE LINK (BATT), 30A FUSIBLE LINK (ABS 1), 30A FUSIBLE LINK (ABS 2). 30A FUSIBLE LINK (BLOWER), 40A FUSIBLE LINK (IGN), 20A FUSIBLE LINK (ECU), 50A FUSIBLE LINK(BAT), 20A FUSIBLE LINK (RAD), and 20A FUSIBLE LINK (COND). The passenger compartment junction block contains the 30A FUSIBLE LINK (PWDW)

Jul 20, 2017 | 2004 Hyundai Elantra

1 Answer

Where is the Mega fuse located on a 2004 Lincoln Navigator


probably alternator fusible link
press the helpful button, and check video link below
Fuse link replacement for Ford Expedition 2003 5 4

Jan 21, 2016 | 2004 Lincoln Navigator

1 Answer

Where is the in line fuseable link located on a 94 ford ranger 2.3 motor


    Alternator fuse link repaired my way. - YouTube

    ? 2:10
    https://www.youtube.com/watch?v=xgJQXKESDcI
    Dec 24, 2013 - Uploaded by Potskie
    I had the exact same situation with my ranger. ... I found thefuse links for the charge or alt output but not the one I ..... In line fuse, battery, or alternator? ... Of Key-Off Battery Drain (Parasitic Draw) - Duration: 18:14. by Motor Age.Missing: 2.3

    Fusible links and inline fuses? - Ford Truck Enthusiasts Forums

    www.ford-trucks.com/forums/885708-fusible-links-and-inline-fuses.html
    Sep 17, 2009 - Location: Kuna ID ... The PO had replaced one of the fusible links with an inline 30amp fuse. .... 81-F-150-Explorer is a splendid one to behold .... to charge the battery goes through that link when needed, and/or the battery to the other components when the engine is off. ... 91 ford ranger 2.3 daily driver 1994 Ford Ranger XLT 2.3L man. trans. - Ford Truck ...
    Jul 6, 2014
    86' Ranger cutting out!!! Fuel ? - Ford Truck Enthusiasts Forums
    May 10, 2012
    90' 302 fusible link for fuel? - Ford Truck Enthusiasts Forums
    Nov 2, 2010
    1988 ranger headlights won't work??? help - Ford Truck ...
    May 17, 2009
    More results from www.ford-trucks.com
    Missing: 94 images for Where is the in line fusible link located on a ...

Dec 30, 2015 | Ford Cars & Trucks

1 Answer

We bought two new battery's a new alternator checked all fusible links from alternator to battery. Truck only runs for a few days with battery light on then we have to charge the battery. It's an 2004


open or shorted alternator circuit (control wire)
let your auto store test the alternator charging
on and off the truck.
inspect 3 wire connector for burn or lose connection
disconnect 3 pin wire and start the engine.if the light stay on you have shot to ground.

Mar 25, 2014 | Ford Cars & Trucks

1 Answer

Ford transit gearbox diagrams


Have the fault codes read. Replace faulty items. Use only genuine items as non-genuine replacement are not always compatible with the OEM fitted CPU units. I suspect servo solenoid faults. Have a pressure test done on the gear box

Jun 11, 2013 | Cars & Trucks

4 Answers

Ford Transit Stereo 6500 CD Code


We have no access to the factory data base that contains this secure information, remember this is an anti theft code.

May 24, 2012 | Ford Transit Cars & Trucks

1 Answer

Have a 2004 taurus.no owners manual. cig lighter fuse blew,dont know which one it is.


Fuses, Switches, Circuit Breakers And Relays Most vehicles use one or more fuse panels. This one is located on the driver’s side kick panel tcca6p01.jpg

It is possible for large surges of current to pass through the electrical system of your vehicle. If this surge of current were to reach the load in the circuit, this surge could burn it out or cause severe damage to the vehicle’s electrical system. It can overload the wiring, causing the harness to get hot and melt the insulation. To protect vehicle wiring, fuses, circuit breakers and/or fusible links are typically installed into the power supply wires throughout the electrical system. These items are nothing more than a built-in weak spot in the system. When an excessive amount of current flows through a circuit it causes an increase in heat throughout the wiring. Fuses and circuit breakers are designed as the weak link in the system and will disconnect the circuit to prevent damage to the components contained within that circuit. Components are equipped with connectors so they may be replaced in situations where they were damaged due to a power surge.
The following are descriptions as to how fuses and circuit breakers protect the electrical system:
  • Fuse- A fuse is a weak link in the system designed to create an open circuit when the amperage flowing through that circuit exceeds the limits of the fuse. As the amperage increases, the conductor within the fuse heats up and eventually melts and breaks apart. This open circuit interrupts the flow of current and protects the components in the circuit.
  • Circuit Breaker- A circuit breaker is a "self-repairing" fuse. It will open the circuit in the same fashion as a fuse. The surge creates heat the same way that a fuse is affected. When the surge subsides and the circuit cools down, the circuit breaker will reset and allow current to flow through the circuit. Typically circuit breakers do not need to be replaced.
  • Fusible Link- A fusible link (fuse link or main link) is a short length of special, high temperature insulated wire that acts as a fuse. When an excessive electrical current passes through a fusible link, the thin gauge wire inside the link melts, creating an open to protect the circuit. To repair the circuit, the link must be replaced. Some newer type fusible links are housed in plug-in modules, which are simply replaced like a fuse, while older type fusible links must be cut and spliced if they melt
CAUTION
Always replace fuses, circuit breakers and fusible links with identically rated components. Under no circumstances should a protection device of higher or lower amperage rating be substituted.
---
I would get a fuse tester that can test fuses while still installed and powered up. It will light if the fuse is blown when applied to the two tabs that are exposed on fuses that are installed in your Ford product.

Check the fuse box under the dash on the driver's side, and check to see if there are any fuses under the hood.

If you don't have the tool, try to look for stickers or download the manual from ford.com.

http://www.ford.com/owner-services/customer-support

Jul 31, 2010 | 2004 Ford Taurus

2 Answers

Wire Gauge Fusible Link


use a 14 gauge link for a 30 amp requirement.

Apr 21, 2009 | 1991 Ford Festiva

1 Answer

/90 ford festiva no power to anything fusible


i would replaceing the fusible link that says main i am pretty sure that it is in the middle they will look good but can be bad

Feb 22, 2009 | 1990 Ford Festiva

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

289 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...