- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
check for loose wiring by heater blower motor if that dont work,take the blower motor out and check it to see if its any good by using two wires connect them and check blower motor on battery posts if it turns then its not that
have 2002 altima,blower works no heat at idle and very little heat when accelerating.I changed carbon cabin filter,made sure little gear under dash to temp knob wasnt broken,flushed and bled system.Nothing worked so checked hoses to heater core and found inlet hose was hot,outlet hose was not.So investigated this problem and came to conclusion heater core was clogged.An easy way to check is to get car to normal running temp. put on heater and blowers at full.Go under dash on passenger side where counsel meets firewall,this is where heater core core inlet and outlet aluminum tubbing go through firewall,you will be able to feel both tubes one closest to you is outlet, so if this one is not hot and and other is your heater core is clogged.I detached both inlet and outlet hoses to heater core from water control valve.Then I blasted water with waterhose and nozzle set at jet,first through outlet hose to blow gunk out,then through inlet hose until water runs clear.Reatach hoses fill and bled system.heater works great nice and hot!
appears we have an Air lock scenario and you will need to perform a
the vehicle on level ground, when cold remove coolant filler cap,
start engine and leave to idle, turn heater on full and blower to
max. When engine reaches operating temperature watch and listen near
coolant filler, keep clear as gurgling and hopefully a boil over
should occur. Top up with very warm coolant and wait as it may do it
for heat inside vehicle if warm replace coolant cap but keep an eye
on temperature gauge as the ~Air lock may have moved on from heater
matrix/core so proceedure needs to be carried out again from COLD.
press the Blue button to appraise my FREE Efforts, Thank You!
It sounds like the fix is a simple one. Just change the thermostat. If you don't know how to do this go to an auto zone or similar auto parts store and they will assist you. good luck and please rate my answer.