Question about Cars & Trucks
I have to fix the timing on my car and need to fix it fast need to know what the timing is on it. Thanks!!!
You cant set the timeing on it , It is preadjusted buy the timeing belt, If it is off there is a problem with the timeing belt,
Posted on Nov 05, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hello, here is a thread I found on this site with from what it looks like, the same problem(with an added solution) that you have. http://www.fixya.com/cars/t1576683-1999_cougar_diagnostic_code_p0430_p0420
Posted on Jan 30, 2009
its very easy, takes maby 10min, there are hidden screws under the cougar symbols on the door, and under the black circles on the carpeted part of the door, they all just pop off, then there are a few on the ouside rim of the door 2 on each side i think, it might require a little jiggling but the car is pretty simple
Posted on Mar 16, 2009
I just got done replacing the O2 sensors in my 99 Cougar due to throwing a P0135 malfunction code. There's 3. Facing the engine there's one in the front coming off of the front header, which is easy to get to. Another more tricky one if between the engine and the fire wall on the rear header pipe. The third is under the vehicle behind the transmission pan on top of the exhaust. In order to replace the O2 sensor near the fire wall you will need to remove the 4 retaining bolts for the ECM module and move it out of the way. Additionally you will need to remove the 2 retaining nuts for a wiring harness that is seated below the ECM module. Pay close attention to the connectors because the front and under vehicle O2 sensors have round connectors the one near the firewall has a squared connector. I was able to replace all 3 by myself in approximately 35 minutes. If your throwing a O2 heater malfunction code it is most likely going to be the sensor near the firewall. make sure that you know someone with a code reader so the code can be cleared. If you're do for an emmissions inspection be sure to put at least 40 miles on the new O2 sensor with different types of driving (e.g. highway, coasting, decellerated turns and rapid acceleration). Gotta love project cars for your kids!!
Posted on Apr 04, 2009
Tips for a great answer:
Jun 18, 2017 | Mercury Cars & Trucks
Sep 27, 2013 | Cars & Trucks
Dec 07, 2011 | 1999 Mercury Cougar
Mar 02, 2011 | 1999 Mercury Cougar
Feb 02, 2011 | 1999 Mercury Cougar
Jun 26, 2010 | 1999 Mercury Cougar
Jan 11, 2010 | 1999 Mercury Cougar
Oct 27, 2009 | 1999 Mercury Cougar
Mar 18, 2009 | 1999 Mercury Cougar
91 people viewed this question
Usually answered in minutes!