Question about Chrysler Voyager

1 Answer

ABS Dash Light on??

How to reset ABS Light on dash?
Is it more than likely a sensor?

Posted by on

  • pt32566 May 11, 2010

    what year is this vehicle? if it is 10 yrs or newer I would suggest taking it to a dealer and having them reset with their computer

  • Anonymous Mar 16, 2014

    abs light is on the dash put new sensor in did not go out

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 107 Answers

The abs system has picked up on a problem with the abs. the abs will not be functional till the problem is repaired. the abs cpu needs to be scanned for fault codes and it will tell the mechanic exactly which part of the system is having trouble. once fixed the light will go out. mike

Posted on Jan 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dash lights and abs sensor


mostly it is good practice to disconnect the battery when working on a transmission removal and that may have affected the CPU program in the ECM
try using a scan tool to reset the ECM
AS to not connecting properly to the ECM , maybe the mechanic is not aware of the procedure
a broken wire on the abs sensor unit will put the abs light on but not the others

Mar 15, 2016 | Cars & Trucks

1 Answer

How to test a abs sensor


Here's a youtube link that you can use to test the ABS sensor with a multimeter! :)

ABS Light ON HOW TO TEST ABS SENSOR with Multimeter Car Repairs Brakes...

Dec 17, 2014 | 1996 Subaru Legacy

1 Answer

Holden epica electronic stability program light appears on dash were a re the sensors and likely problems that would cause the dash light error code to comeon please


Traction control is with the wheel sensors. A bad sensor, bad bearing, or bad wiring. ABS is also controlled by these. Code readers don't read ABS and Traction control. Get the vehicle on a scanner....

Dec 04, 2014 | Holden Cars & Trucks

1 Answer

Abs rear wheel sensor offside


When you replace a speed sensor, the light should turn itself off after driving it. If it does not go off, than there is another problem.

Mar 03, 2014 | 2004 Nissan Nissan almera tino

1 Answer

Svs, abs. no trac, and perf shift lights


Trac control and ABS lights come on usually when one of your ABS wheel sensors is either bad and needs replacing or corroded and just may need cleaning. This happened to me. It was my front left abs sensor. they replaced it and al the lights went out and all good now. I also bought an OBDII that plugs into your car and the computer tells the OBDII whats wrong and what sensor it is. You also get the option to erase the codes and put out some or all the lights on your dash. Some times a glitch will light a light on the dash and resetting or erasing it with the OBDII corrects the problem. Hope this helps. God Bless :O)

Feb 25, 2014 | 1998 Buick Regal

1 Answer

MY 2000 DODGE NEON ABS DASH LIGHT,AND THE TRAC LIGHT ON THE DASH IS STAYING ON


These two lights work together. The traction control uses the ABS to work. You most likely have a bad wheel speed sensor. Have it scaned with a scan tool under the ABS. Replace which ever sensor it says is open.

Mar 04, 2013 | 2000 Dodge Neon

1 Answer

My abs light is on and my brake light blinks when i start to drive. i have already replaced the abs module, what else could it be?


There may be another module have you replaced it under passanger side dash or on the fire wall under the hood lots of cars have to be reset by machine one of the two could be your problem you have to remember most cars now are all electronic hope this helped

Nov 07, 2011 | Cars & Trucks

1 Answer

I have a 92 pontiac sunbird le 4cyl 207000 miles and driving home today the abs light in the dash just started flashing any thoughts would be greatly appreciated.


When your abs light comes on it means that something is wrong with you ABS system. Sometimes the abs sensor get durty and can make the ABS light come on in the dash.

Mar 03, 2011 | 1992 Pontiac Sunbird

1 Answer

How do i reset the ABS warning light and the rear light indicators on the dash?


usually when your front wheel bearing is wrecked the abs will go off.

cant reset the abs light till you change the bearing and get a new sensor..... if the bearing is the problem.

jack the front end up and see if you can wiggle the tire and up and down and see if it seems to wiggle in the hub. if the tire wiggles in the hub (not the suspension, in the hub) your bearing is worn out and the sensor has gone off. the new sensor comes with the new bearing.

good luck and let me know if i helped

Apr 09, 2010 | 1997 Jeep Grand Cherokee

1 Answer

The ABS light on my dash came on. My mechanic has checked the brakes and can find no problem. I would like to reset the light to see if the a proble is detected again by the light coming back on. How do i...


Only wiht a scan tool can that light be reset. If the brakes looked good to the mechanic then the problem could be a wheel speed sensor, transmission speed sensor, or the ABS module itself. This things can be checked by a diagnostic scan tool.

Jul 23, 2009 | 1992 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,002 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...