Question about Cars & Trucks

Open Question

I have a Ford escape 2004 v6 and the code p0443 is comming up

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 617 Answers

SOURCE: does anyone know what the code po316 is on the

P0316 .... Engine Misfire Detected on Start-up (first 1000 Revolutions)

P0300b .. Random/Multiple Cylinder Misfire Detected

P0304b .. Cylinder 4 Misfire Detected

P0357 .. Ignition Coil G Primary/Secondary Circuit

P0353 .. Ignition Coil C Primary/Secondary Circuit

From codes you need new spark plus, Ignition Wires, and ignition coils

Posted on Feb 07, 2010

Testimonial: "this veihicle has the coils over the plugs so there is no ignition wires per say just a plug in with regular wires"

Ad
Zeevert
  • 373 Answers

SOURCE: How do you replace the EGR on a 2002 ford escape?

To replace the the spark plugs on the V6, you'll need to remove the intake manifold. There is a coil on top of each plug (COP). Check this website for info:
http://www.escape-central.com/1forum/showthread.php?threadid=32550&referrerid=11756
The same link will also show the R&R of the EGR valve.

Posted on Mar 17, 2010

  • 233 Answers

SOURCE: how do you remove an alternator from a 2004 v6

Release the tension on the belt, remove the wiring on back of alternator and remove the bolts. Installation is reverse of removal.

Posted on Jul 06, 2010

ZJLimited
  • 17970 Answers

SOURCE: Engine misfire 2004 ford escape v6 3.0 ltr, need

2004 Ford Escape 3.0 liter V-6 VIN "1"

2b4e09d.gif


The next, I "bid" it. Good luck.

Posted on Oct 18, 2010

traceylewis1
  • 363 Answers

SOURCE: 2004 ford escape v6 serpentine

If you look in front of your fan shroud on the flat ptate there shoud be a digram of the routing there. Sometimes they place the digram on the inside hood. Good Luck

Posted on Nov 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code p0316 also p0300 truck has no power


P0300 is a random misfire and P0316 is misfire at start-up.
If you have the V6, I would start by replacing the plugs and all the coils.
This is a little ******* the V6, since you have to remove the intake manifold, and the coils can be expensive. Coils are available on Ebay.
I've replaced all the coils on my 2002 Escape V6 after 100,000 miles. Typical V6 problem.

Generally, the issue could be the following from: http://www.obd-codes.com/p0300

A code P0300 may mean that one or more of the following has happened:

  • Faulty spark plugs or wires
  • Faulty coil (pack)
  • Faulty oxygen sensor(s)
  • Faulty fuel injector(s)
  • Burned exhaust valve
  • Faulty catalytic converter(s)
  • Stuck/blocked EGR valve / passages
  • Faulty camshaft position sensor
  • Defective computer

Sep 09, 2011 | 2004 Ford Escape

1 Answer

Where is #2 cylinder on 2004 Ford escape V6 cylinder


Check this firing diagram for 2004 Ford Escape 3.0 liter V-6 VIN "1"...

zjlimited_483.gif

Hope helps (remember to rate and commene this answer).

Jul 11, 2011 | 2004 Ford Escape

1 Answer

2004 ford escape engine emission light on lunges while idleing


I have found this to be a common problem on 2001-2006 V6 Ford Escapes. In 99% of these cases the problem is the Catalytic Converter. The V6 has three in-total, one per exhaust manifold, and one after the Y connection. This third catalytic converter is the one that always gets clogged. Another clue to it's failure is a loss of power and a increase in fuel consumption. The later 2006-2008 have a redesigned exhaust system. Hope that helps.

Dec 16, 2010 | 2004 Ford Escape

2 Answers

2004 Ford Escape with 3.0L V6. misfire with flashing "check engine" light. Codes retrieved are P0316 and P0304


P0316 = engine misfire
P0304 = #4 cyl
A very common problem is a bad COP or coil. They can be expensive ($75? at part store), so you could try switching the coil with another cylinder and see if the code changes location with the coil.
They are easy to replace. Unplug the connector. Remove the one screw (8mm?). Pull straight out.


zeevert_19.jpg

Nov 29, 2010 | 2004 Ford Escape

1 Answer

How many quarters of oil ford escape 2004 need/


if it is a 4clyinder it should be 4-4.5 us quart if a v6 it should 5 us quarts

Oct 18, 2010 | 2004 Ford Escape

1 Answer

Engine misfire 2004 ford escape v6 3.0 ltr, need engine firing order diagram


2004 Ford Escape 3.0 liter V-6 VIN "1"

2b4e09d.gif


The next, I "bid" it. Good luck.

Oct 18, 2010 | 2004 Ford Escape

1 Answer

How do you remove an alternator from a 2004 v6 ford escape?


Release the tension on the belt, remove the wiring on back of alternator and remove the bolts. Installation is reverse of removal.

Jul 06, 2010 | 2004 Ford Escape

1 Answer

Re: Engine light is on after changing spark plugs


Go to autozone and have the code scanned. And come back here to ask more question. Otherwise you are wasting money.

Jun 22, 2008 | 2004 Ford Escape

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...