Question about 1998 Land Rover Discovery
Both back windows stopped working at the time time. What should I look for?
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Speedometer stopped working
pretty common for the cable to break,if you get under the vehicle disconnect it from the gearbox and tug the inner cable it should not come out...if it does you know the problem....if it doesnt put a battery drill on the cable....dont start the engine but leave the ignition on a spin the drill if your speedo dont work then you need a new speedo head.....but that is very uncommon!!!!!!!!!!!!!!!!
Posted on Dec 30, 2008
Give the dealership your VIN# and they will in turn provide you with an 'unlock' code. Input the code and you should have radio. If not, you will need to remove the radio and give the dealer the chassis # found on the case.
Posted on Mar 20, 2009
I think its fairly standard across all Land Rovers. First of all you need a code. This was supplied on a credit card sized piece of card with the original vehicle. I'l assume its not to hand... Typically, you can source the code (which is specific to your serial number / radio) from a supplier such as this on eBay: http://cgi.ebay.com/Landrover-Radio-Code-Decode-Service-4775-Navigation-/380181370976?cmd=ViewItem&pt=UK_Audio_TV_Electronics_In_Car_Entertainment_GPS_In_Car_Audio_Players_PP&hash=item5884935860 Code in hand, you are ready to enter it and unlock the radio.
You only actually need numbered button <1> and the two seek buttons that look like <| and >| .
When you turn the radio on, you should see it request <CODE>
Press preset button <1>. This should identify character 1 of the code.
Use one of the two tuning buttons (Seek up , or seek down - the ones with arrows going into lines) to move to the right number (0-9).
Press preset button <1> again to lock digit 1 and move onto code digit 2.
Repeat twiddling the upseek and downseek. Press button 1 etc .... until all four codes have been entered.
When you press <1> for the final time, if the code is correct, you'll get a two tone beep to confirm and the radio is unlocked.
If incorrect, you are progressively locked out (in doubling time periods).
Hope this helps.
Posted on May 06, 2010
first disconect fuel lines then drop the tank down on the ground fuel pump is on the top pull fuel pump out drop new one in,need to change fuel pump relay when replaceing fuel pump relay is under hood in the fuse box.
Posted on Jul 31, 2010
Tips for a great answer:
Jul 30, 2012 | 1995 Land Rover Discovery
Jul 27, 2017 | 1995 Land Rover Range Rover
Mar 01, 2011 | 1998 Land Rover Discovery
Jan 17, 2011 | 1998 Land Rover Range Rover
Nov 10, 2010 | 1998 Land Rover Discovery
Nov 29, 2009 | 1998 Land Rover Discovery
Nov 05, 2009 | 1998 Land Rover Discovery
Mar 04, 2009 | 1998 Land Rover Range Rover
Feb 24, 2009 | 1998 Land Rover Discovery
May 01, 2017 | 1998 Land Rover Discovery
25 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: