Question about 2009 Mitsubishi Galant ES

Open Question

Why wont my left turn signal in my 09 Mitsubishi galant work when the bulbs ande fuses are good

Bulbs and fuses were checked and are good

Posted by on

6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1 Answer


dd u cjeck the ECM?

Posted on Jun 24, 2008

  • 85 Answers

SOURCE: my 2000 mitsubishi galant es went dead, motor will turn over but

do you have spark? How do you know if your timing belt is good? sometimes it doesnt break just shed the teeth which could be missing under the crankshaft. The best way to check is to have two people. have one try to start the car and see if the camshaft is actually spinning. The crankshaft will always turn but if the teeth are gone on timing belt this would cause the belt to stay in one position not moving the camshaft. so if you can remove the upper timing belt cover and do this quick inspection with someone that will tell you for sure. if it does look like it is spinning then by hand turn engine very slowly with plug coil wires removed. and make sure teeth are all there. It couldve jumped timing. (valve timing)

Posted on Feb 19, 2009

  • 117 Answers

SOURCE: brake lights wont work

Check the brake light switch which is located above the foot pedals on a metal bracket.

Posted on Apr 07, 2009

  • 82 Answers

SOURCE: My dashboard lights don't work on my 2003 mitsubishi galant. Is there a fuse box?

Yes, There is a fuse box ... your owners manual will asssit you in locating it and the suspect fuse ... do your parking lamps work? Is your dimmer turned all the way down?

Posted on May 01, 2009

  • 512 Answers

SOURCE: where is the turn signal flasher relay on an 02

The flasher is common for both sides. Look at your turn signal switch or the wiring to the bad side.

Posted on Sep 08, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Turn signals don't work,fuses good, on my 1998 mitsubishi galant

Hi, replace the flasher. It's below the instrument panel, left of the steering column. Looks like the picture below.


Mar 26, 2011 | 1998 Mitsubishi Galant

2 Answers

I only have high beams no low beams.

I would start by checking the bulbs, if the bulb goes bad you can still have high beams, so start by checking the bulb and the fuses if they dont light up after replacing the bulbs , hope this is helpful,

Nov 10, 2010 | 2006 Mitsubishi Galant

1 Answer


Remove bulb one at at time.

Check the socket for TWO contacts (two elements) or single contact.

Check the bulb.

Make sure you has the correct bulb install.

A single contact bulb will short out a TWO contacts socket.
Wrong type of bulb will cause the problem you has now.

The correct model for rear turn signal is 3497.

Jul 26, 2010 | 1997 Mitsubishi Galant

1 Answer

None of the brake lights are working on my 2006 mitsubishi galant. I changed both bulbs . I checked brake switch with an ohm meter. I checked all the fuses. Do the brake lights operate through one of the...

Check the wiring going to the chassis holding the brake light bulbs. In the trunk when setting groceries and other items inside someone may have knocked a wire loose.
When you say none of the brake lights did you mean turn signals and parking lights as well on thefront and back?

Apr 16, 2010 | 2006 Mitsubishi Galant

1 Answer

Signal lights and high lights not working

turn signal relay'
high beam relay'
fog light relay '' locate in engine compartment fuse box check all of thse you should find the problem'' and dont for get to check the bulbs too

Sep 15, 2009 | 2001 Mitsubishi Galant

1 Answer

Turn signals won't work 1997 Galant

Turn signals don't use a fuse, they use a flasher unit that turns them on and off. First I am going to assume that you have checked your bulbs front and rear. Next turn on your hazard lights to see if they work. If they do go ahead and leave them on. Most cars have two flasher units, one for turn signals, the other for the hazard lights. The nice thing is that they normally use the same ones and can be swapped. Using the sound of the hazards turning off and on, you should be able to find and see both units, or at least they will be very close to each other. Now just reverse them and hpefully you now have turn sigs.

Sep 11, 2009 | Mitsubishi Galant Cars & Trucks

2 Answers

I need the fuse diagram for a 1995 Mitsubishi Galant. A fuse for my sunroof is blown and i want to replace it but dont know which fuse to replace. Help please

Hi there;
Here is the picture of the fuse block under the left side of the insrument panel. the fuse you are looking for should be #17, #8 is also involved & also #8 in the fuse panel under the hood. I tried to send you the wiring diagram but the program won't allow it.

good luck Hope this helps

Mar 24, 2009 | 1995 Mitsubishi Galant

Not finding what you are looking for?
2009 Mitsubishi Galant ES Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides