Question about 2001 Chevrolet Cavalier

2 Answers

2001 chevy cavalier door contact switch install

How to remove the old door contact switch and install the new one?
2001 chevy cavalier door jamb switch
Thank You

Posted by on

  • Anonymous Mar 15, 2014

    When I returned to have it repaired the door would not shut because they said the van was old with new parts

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 6,674 Answers

If no screws or nuts holding it that you can see from outside, then just use a screwdriver or something and pry at the base where it is against metal.

Posted on Jan 04, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,114 Answers

Pop in pop out!

Posted on Jan 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace alternator 2001 chevy cavalier


Disconect the Negative battery cable, remove the Accessory drive belt, remove the Alternator mounting bolts, remove Alternator electrical connectors, remove Alternator.
Install in reverse order.

On the 2.2 and on the 2.4 they are mounted near the top of the engine between the head and the radiator.

Oct 19, 2014 | 2001 Chevrolet Cavalier

1 Answer

2006 Outback Door-Jamb Switch Replacement


Get replacement, pull up and out on broken switch and holding wire connector un-clip old switch (be careful not to let wire fall back into hole). Insert new switch into connector of wire, slip bottom of switch through hole and rotate top into position till it snaps into place. Done.

Jun 19, 2010 | 2005 Subaru Outback

2 Answers

Timing alignment for 2200


put it on tdc
and go from there
tdc top dead center

May 09, 2010 | 2001 Chevrolet Cavalier

1 Answer

Replace fuel pump in 2001 Chevy Cavalier


remove the gas tank, undo the ring that holds the sending unit , replace fule pump and new sock filter, reinstall

Nov 20, 2009 | 2001 Chevrolet Cavalier

1 Answer

How to change the brakes on the 2001 chevrolt cavalier


1. Remove the tire.
2. Unbolt and remove the caliper. (bolts are hex, octagon, or torx and are located on the inside part of the caliper.
3. Remove old pad from caliper
4. Compress piston all the way in with C clamp, and then install new pad.
5. Re-install caliper and bolt it back on
6. Replace tire

Oct 02, 2009 | 2001 Chevrolet Cavalier

1 Answer

Dome light and reading lamps stay on and will not cut off.


your door close switch is non-functional. its located in the door jamb. its a black button the size of a shirt button. usually held in by one or two screws.

there is one for each door.

Apr 11, 2009 | 1997 Chevrolet Cavalier

1 Answer

2001 Chevy s10 door won't latch


you need to remove the door trim. Remove linkage attached to latch. Usually the latch will be secured with 3-4 large phillips or torx screws. Remove old latch and reverse procedure to install new latch

Mar 28, 2009 | 2001 Chevrolet S-10

1 Answer

How do you change the headlight for a 2001 chevy cavalier


i actually just did this a couple days ago, this takes about 20 minutes and a little bit of patience. When you pop your hood you will see a protective piece of plastic over the headlights/radiator, you firstly have to remove the plastic clips holding that piece then pull that piece of plastic off, once done u will see 2 bolts holding each headlight in place, i believe it is a 9/16 socket but if not just find the one that fits, remove the 4 bolts (2 for each headlight) and pull the headlight in an up and outwards manor. if you feel any resistance do not yank look at why it is catching and clear it, then it should just pop out (the headlight and the corner piece and clipped together so dont pull it too far out) then when the bulb is accessible pull the old bulb, put the new bulb in and voila place the headlight back into position, redo the 4 bolts holding the headlights and re-attach the plastic headlight/radiator cover. Enjoy the new lights

Dec 21, 2008 | 2001 Chevrolet Cavalier

Not finding what you are looking for?
2001 Chevrolet Cavalier Logo

Related Topics:

666 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...