Question about 1997 Chevrolet S-10 Pickup

Open Question

Interior door chime on 1997 chevy s10 not going off

Please help, interior door chime not going off in truck, tried to remove fuse that works, but it operates brake lights.
Robert

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 3 Answers

SOURCE: No tail lights

Try checking the headlight switch it may have broken contacts in it. Easy fix go to a salvage yard find same make and model truck, swap headlight switches.

Posted on Jan 06, 2009

Ad
  • 651 Answers

SOURCE: 1997 CHEVY TAHOE. BRAKE LIGHTS

the brake light switch. under dash behind brake peddle arm.

Posted on Jan 06, 2009

  • 141 Answers

SOURCE: Brake Light Problem -1997 Chevy Lumina

The ground wire in the trunk area, coming from the brake light harness, might have come off or really loose. Hope this will get your lights working again. Best wishes.

Posted on Jan 20, 2009

csmock132
  • 4669 Answers

SOURCE: i have a 1990 chevy s10,all my lights work except my brake lights

Do you have power with a test light in and out of the switch? Do the turn signals work? Will the brake lights work if you play with the turn signal handle?

Posted on May 06, 2009

  • 3 Answers

SOURCE: My third brake light dosen't work on my chevy s10 94'

I had a similar problem with my 1994 S-10 LS extended cab. Both tail brake lights worked fine. I removed the 3rd brake light cover and tested for voltage at the steel center of the two rivets and found the positive (driver side) negative (passenger side) were good. I checked the two metal strips that send power to bulbs and found the positive side was open. Seems the flared side of the rivet was not making contact with the metal strip. I bucked the rivet with a punch and hammer and it took care of the problem.

Posted on Jun 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My interior dome light won't go off in my 1997 Chevy lumina please help!! Don't want my battery to go dead :(


Disconnect your battery or remove the dome light bulb. Either there is a switch at the light that you hit and made it stay on or the door switch is broken.

Jan 17, 2017 | 1997 Chevrolet Lumina

1 Answer

What should I check with no interior lights or door chime operating with the opening of any doors?


Try these simple checks 1st;

Check the door plunger buttons on all the doors make sure there not stuck.

check to fuse box for a blown fuse, replace.
If this do'es not work then its more complicated get back to me.
Hope this helps Mike

Jan 17, 2016 | Cars & Trucks

1 Answer

Inside alarm will not shut off. fuse also has brake lights so cannot remove fuse.how do you disable chime?


Try replacing the dome light switch on the door jamb, can be accessed by removing interior kick panel

Apr 03, 2011 | 1997 GMC Jimmy

1 Answer

I am in the Army and away from home attending a course and my wife calls me to inform me that a steady warning chime is going off inside the truck. When I asked to hear the chime it sounds to me like it...


The headlight switch turns on the courtesy light when twisted. Tell her to make sure that the headlight switch is twisted off the indent. If this isn't it, it may be the body control module.

26fe158.gif

Oct 20, 2010 | 2001 Chevrolet Blazer

1 Answer

1997 chevy s10 blazerdash wont light up when key


the dash sound's like a fuse, check the fuse box under the hood and in the door jamb on the side of the dash, also check your fuel filter and fuel pump, im betting on the pump because i have a 2001 chevy blazer that has had two replaced and it has 233000km on it!

Jun 04, 2010 | 1997 Chevrolet Blazer

1 Answer

1997 chevy lumina Interior lights will not shut


your door pin switch is most likely bad. it is what turns it on and off.

Feb 21, 2010 | 1997 Chevrolet Lumina

1 Answer

What other accessories are run by the radio & dome light fuse i have disconnected both and the new fuse still blows


i believe you have radio ,sometimes door chime,interior light.try and disconnect lighter its a big factor for some reason the lighter is always affecting other accessaries

Jan 27, 2010 | 1997 Ford Contour

2 Answers

No tail lights


Try checking the headlight switch it may have broken contacts in it. Easy fix go to a salvage yard find same make and model truck, swap headlight switches.

Dec 27, 2008 | 1997 Chevrolet S-10 Pickup

1 Answer

Warning chime continues to chime as I drive


My guess is a faulty switch at door for turning off interior lights/door closed, which is giving chime that door is still open

Dec 10, 2008 | 1997 Ford Mustang Cobra

1 Answer

1997 venture keyless remote programming


SYSTEM OPERATION

System warning lamp located on top of the instrument panel
Press UNLOCK button once , turns on interior lamps and deactivates alarm (if fitted)
Press UNLOCK button twice w/in 5 seconds unlocks all doors, turns on interior lamp and deactivates alarm (if fitted)
To activate alarm system (if fitted):
Switch ignition OFF
Open driver's door
Press Lock button on remote
Close Driver door
warning lamp will flash when system is activated
Press remote power sliding door button will open sliding door (if fitted) only if unlocked first
Pressing remote panic button:
*Sounds horn intermittently
*Flashes exterior lamps
*Turns on interior lamps
**Pressing panic for the second time OR switching ignition ON deactivates alarm.


PROGRAMMING
Remobe key from ignition switch
Remove the "BCM PRGRM" fuse, from the fuse box
Close all doors
Turn ignition switch to the ACC position
With in 1 SECOND , turn the ignition switch to OFF then back to 'ACC'
(really, with in one second)
Open and close the driver's door. A chime will sound, indicating programming mode activated
Press and HOLD LOCK and UNLOCK SIMULTANEOUSLY untill a chime sounds 2 times ( about 15 seconds)
Repeat this exact procedure for all remotes to be programmed
Remove key from ignition
Refit 'BCM PRGRM' fuse.

4 REMOTES MAXIMUM CAN BE PROGRAMMED

Aug 24, 2008 | 2000 Chevrolet Venture

Not finding what you are looking for?
1997 Chevrolet S-10 Pickup Logo

Related Topics:

211 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...