Question about 2006 Chrysler 300

1 Answer

2007 chrysler 300 car won't start OBD light on.

Drove car 50 miles.drove car 30 miles back stoped to get gas turned car off pumped gas. Went to start it again and it did nothing.the OBD light came on. It flashed 9 times and stays on. I got someone to jump me off but it would not jump off from the remote jump had to go to main battery. It started but then the gauge cluster started going haywire.I drove it to Autozone. He checked my alternator putting out 14 volts and put code reader on it said low voltage.Drove it another 20 miles home with the gauges going haywire but the car ran fine. no drop in power and no rough ride. All warning lights were flashing and a dinging sound for warning What could be the problem?

Posted by on

  • sweetea13
    sweetea13 Nov 05, 2012

    It was the battery after all. They checked the battery while the car was running so the battery checked out good and it was not.but thanks anyway.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 20 Answers

Sounds like an electrical issue. You'll want to take it in.

Posted on Nov 04, 2012

×

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 323 Answers

SOURCE: 2005 Chrysler Town & Country Check engine light came on.

Replace the EGR valve, the code is for EGR system performance

Posted on Jun 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2004 dodge durango 5.7l with the hemi, won't start


I would start by checking the basics which are checking for spark and fuel. If you have a gauge, check to see if you have fuel pressure when the key is turned on. If you have fuel pressure, check for spark. Chrysler products are known for the crank shaft sensor to go bad and cause a no start. Also, if driving for a certain period with the pedal depressed at the same speed, the throttle position sensor will stay at that position if stuck and will cause either and driveability problem or stalling. You may wanna look into replacing or at least checking that. Good luck.

Feb 04, 2013 | 2004 Dodge Durango

1 Answer

My malfunction indicator light came on but it went back off what does this mean 2007 chrysler300


The MIL is an indicator of excessive emmissions,if the light went
out,it's ok. May have been a loose gas cap or even a wheel spinning
in snow,I'd let it go unless it comes on and stays on.

Jan 30, 2013 | 2007 Chrysler 300 AWD Sedan

1 Answer

2004 chrysler pacifica no power even after jump


check for a bad connection like a bad ground at the battery, make sure both terminals are tight at the battery, the starter and the ground at the engine. the shop that installed the EGR should have erased the codes, after 50 to 100 miles you would be able to go through emissions.

Sep 01, 2012 | Chrysler Pacifica Cars & Trucks

1 Answer

2005 Chrysler 300 C. Battery went completley dead. Jump it . It holds a charge. Now check engine light on. Runs rough multiple missfires. Replaced battery. Ran good for 10 miles. Check engine on again....


Fill up your gas tank and ad a bottle of Lucas gas treatment/lube to the tank, be sure it's the treatment in a little clear bottle and not injector cleaner. After you've added the gas and treatment drive the car, with the head, driving lights, radio, heater, etc. all turned off. It may take ten miles or more but the check engine should go off and car will run normal. NOTE: Never jump start your car or use it to jump someone else's without referring to your owners Manuel.

Oct 15, 2011 | 2007 Chrysler 300c AWD Sedan New Cars

1 Answer

I have a 2004 Yukon denali and while driving, I got check gas cap alarm. 2 miles later check engine light is on. Checked gas cap, cleaned gasket and tightened. Drove for 2 days. Reset fault and drove 160...


Hello, have you tried to unhook the negative side of the battery for about 10 minutes and then go from there . It should reset the computer completely .

Sep 14, 2011 | 2003 GMC Yukon Denali

2 Answers

3002 Pt Cruiser GT - 53, 000 miles - first start of the day - went about 1/4 mile down hill, engine light came on. Had put gas in the day before thought maybe the gas cap was lose. Tightened gas cap, went...


It sounds like a sensor is intermittantly loosing the data stream. Since the engine light came on, I would go to a reputable shop and have them check for codes. Many auto parts stores will do this as well and sometimes for free. Can't beet free. If I were to guess I would say something like the camshaft postion sensor is going bad, Or the crankshaft postion sensor, Or something like that. The code will tell which one it is.

Good luck, and if you have any further questions please....ask!

Apr 17, 2011 | 2001 Chrysler PT Cruiser

1 Answer

I had a front left head lamp bulb replaced midmorning today.


i doubt there would be any connection with a head light bulb

Mar 26, 2009 | 2007 Chrysler Pacifica FWD New Cars

1 Answer

WON'T START


my 2006 pt cruiser won"t start. the light do come on but it will not turn over just a clicking sound. i drove it for about an hour then went back to it 30 mins later and it didn"t start. just clicking sound.

Sep 21, 2008 | 2006 Chrysler PT Cruiser

Not finding what you are looking for?
2006 Chrysler 300 Logo

360 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7711 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...