Question about 1999 Ford Ranger SuperCab

Open Question

How to remove crankshaft pulley on 1999 ford ranger 2.5

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
shop242
  • 214 Answers

SOURCE: Timing Marks-99 Ford Ranger

Its Dot to Dot.. Crank Pointer Up.. CAm Pointer down.. DOT 2 DOT.. Thank you

Posted on Mar 15, 2009

Ad
motor1258
  • 6674 Answers

SOURCE: camshaft timing mark crankshaft timing mark

Belt covers need to be on. Timing mark on crankshaft (while on compression stroke) should line up with TDC mark on cover. then Camshaft mark, needs to line up by looking through access hole of cover, and align mark on cam sprocket with pointer on inside of belt cover.

Posted on Oct 22, 2009

keeperoffire
  • 106 Answers

SOURCE: I am unable to remove the crankshaft pulley on my

the crankshaft pulley is also called the harmonic balancer.At any parts house checker,autozone,ect. will have the tool you need.It is called a harmonic balancer puller and bolts to the pulley and pulls it off.Let me know if this helped.

Posted on Jan 09, 2010

lacroixx1
  • 101 Answers

SOURCE: 1999 ford ranger 4.0 engine code p1151

are all codes for the o2 sensor

Posted on Jun 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 ford taurus 3.0 dohc


this job does require some special tools to remove the crankshaft balancer....
Removal
1. Disconnect battery ground cable.
2. Remove drive belt.
3. Raise vehicle on hoist.
4. Remove RH front wheel and tire assembly.
5. Remove four crankshaft pulley to damper retaining bolts and remove crankshaft pulley.

printer.png Zoom and Print Options42_fm99tausa_303.01a-027b.png&width=448&height=330&displaytype=display&imgrotation=&links=

6. Remove crankshaft damper retaining bolt and washer.

7. CAUTION: Use care when removing damper so as not to damage crankshaft or create burrs.

Remove damper from crankshaft using Crankshaft Damper Remover 303-009 (T58P-6316-D) and Vibration Damper Remover Adapter 303-176 (T82L-6316-B).

Jun 15, 2012 | 1999 Ford Taurus

1 Answer

Engine Timing marks on a 4.0 ford ranger on a 2005


Rotate the engine so that No. 1 cylinder is at TDC on the compression stroke. Check that the timing marks are aligned on the camshaft and crankshaft pulleys. An access plug is provided in the cam belt cover so that the camshaft timing can be checked without removal of the cover or any other parts. Set the crankshaft to TDC by aligning the timing mark on the crank pulley with the TDC mark on the belt cover. Look through the access hole in the belt cover to make sure that the timing mark on the cam drive sprocket is lined up with the pointer on the inner belt cover.

Nov 02, 2011 | 2005 Ford Ranger

1 Answer

Is it possible to remove the crankshaft pulley without the special tool?


Hi and welcome to FixYa!

Yes it's possible but it's too risky. I strongly suggest that you get a puller to do the job. Pulling it just by tapping can damage the spline.

Hope this helps and thank you for using FixYa! Have a good one!

Mar 07, 2011 | 1999 Ford Ranger SuperCab

2 Answers

I am unable to remove the crankshaft pulley on my 1999 ford taurus


the crankshaft pulley is also called the harmonic balancer.At any parts house checker,autozone,ect. will have the tool you need.It is called a harmonic balancer puller and bolts to the pulley and pulls it off.Let me know if this helped.

Jan 09, 2010 | 1999 Ford Taurus

2 Answers

Timing marks on 1999 Ford Ranger 2.5L.


Rotate the engine so that No. 1 cylinder is at TDC on the compression stroke. Check that the timing marks are aligned on the camshaft and crankshaft pulleys. An access plug is provided in the cam belt cover so that the camshaft timing can be checked without removal of the cover or any other parts. Set the crankshaft to TDC by aligning the timing mark on the crank pulley with the TDC mark on the belt cover. Look through the access hole in the belt cover to make sure that the timing mark on the cam drive sprocket is lined up with the pointer on the inner belt cover.

  1. Loosen the alternator retaining bolts and remove the drive belt from the pulleys. Remove the water pump pulley.
  2. Loosen and position the power steering pump mounting bracket and position it aside.
  3. Remove the four timing belt outer cover retaining bolts and remove the cover. Remove the crankshaft pulley and belt guide.
  4. Loosen the belt tensioner pulley assembly, then position a camshaft belt adjuster tool (T74P-6254-A or equivalent) on the tension spring rollpin and retract the belt tensioner away from the timing belt. Tighten the adjustment bolt to lock the tensioner in the retracted position.
  5. Remove the timing belt.

To install:
  1. Install the new belt over the crankshaft sprocket and then counterclockwise over the auxiliary and camshaft sprockets, making sure the lugs on the belt properly engage the sprocket teeth on the pulleys. Be careful not to rotate the pulleys when installing the belt.
  2. Release the timing belt tensioner pulley, allowing the tensioner to take up the belt slack. If the spring does not have enough tension to move the roller against the belt (belt hangs loose), it might be necessary to manually push the roller against the belt and tighten the bolt.

The spring cannot be used to set belt tension; a wrench must be used on the tensioner assembly.
  1. Rotate the crankshaft two complete turns by hand (in the normal direction of rotation) to remove the slack from the belt, then tighten the tensioner adjustment and pivot bolts to specifications. Refer to the necessary illustrations. Make sure the belt is seated properly on the pulleys and that the timing marks are still in alignment when No. 1 cylinder is again at TDC/compression.
  2. Install the crankshaft pulley and belt guide.
  3. Install the timing belt cover.
  4. Install the water pump pulley and fan blades. Install upper radiator hose if necessary. Refill the cooling system.
  5. Position the alternator and drive belts, then adjust and tighten it to specifications.
  6. Start the engine and check the ignition timing. Adjust the timing, if necessary.

Nov 25, 2009 | 1999 Ford Ranger SuperCab

1 Answer

99 ford ranger timing belt 2.5


sorry mate, you will have to remove the crankshaft pulley to be able to remove the cover to gain access to the belt.
If you can't gain access to the pulley bolt or bolts, you will have to remove the radiator, remember to save the coolant if you don't want to spend money on new.

1.If it is an automatic vehicle, remove the starter and block the engine at the ring gear while someone loosen the bolts. If it is a petrol engine, shift it into 3rd gear and hold the brakes while someone loosen the bolt or bolts.
2.Remove the pulley, if it does not move off easily you will need a puller to remove it, do not hit the pulley you will distort it or brake it.
3.Remove the covers and use a tippex pen to make reference marks on the pulleys and the block and head, even if you know how to set up the timing it is good practice to do so, if you get stuck you will be able to use the marks to line up the toothed pulleys to the marks.
4.Now remove the belt and the tensioner pulley ALWAYS REPLACE THE TENTIONER PULLEY the bearings will not last another belt service.
5.Pull the tensioner pulley against its spring and lock it up, this makes belt installment easier.

Install new belt and if possible replace crank and cam seals, its only good practice

Oct 16, 2009 | 1999 Ford Ranger SuperCab

1 Answer

How do I remove a 2004 ford ranger xlt crankshaft pulley?


the crank sensor may not be working. it controls the spark.

Jun 07, 2009 | 2004 Ford Ranger

1 Answer

Timing Marks-99 Ford Ranger


Its Dot to Dot.. Crank Pointer Up.. CAm Pointer down.. DOT 2 DOT.. Thank you

Mar 15, 2009 | 1999 Ford Ranger SuperCab

1 Answer

Is the crankshaft pulley aright or left handed thread


The bolt in the middle is usually counterclockwise. Standard thread removal.

Feb 19, 2009 | 1998 Ford Ranger SuperCab

Not finding what you are looking for?
1999 Ford Ranger SuperCab Logo

Related Topics:

407 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...