Question about Cars & Trucks
Sounds like the engine is turning over but not firing off. Needs 3 things to run, fuel, air and spark, so you are missing one. A small amount of gas can be shot down the throttle body as you try to start to see if the engine tries to run. Otherwise check to see if the spark plugs are firing.
Posted on Nov 04, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2000 Chevy Blazer
i am working on a s 10 of the same yaer and problem i will post my results after tomorrow when i have finished the job i bout this truck cause of the forum i own one that is a great one and this one is for experimental purpose i will let u know so far you cant lift the motor with a jack or a hoist so we r going another route in the mornin
Posted on Dec 27, 2008
Sounds like your A/C compressor is seized up and stalls the engine through the belt train when the compressor clutch kicks in.
Try turning the compressor by hand (not from the pulley but from the front part (magnetic clutch), if you can't turn this by hand, it means the compressor is seized up...
As for fixing it, the actual fix would be to replace the compressor assembly, but believe me, that is usually not a cheap fix...
If you want the cheap fix, find the 2 wires that go to the compressor clutch (there is usually a plugin close to the compressor), unplug it and/or cut the wires and secure them to make sure they don't short out anywhere, or even better find the fuse for the A/C and take it out. Of course then the A/C won't work, but the clutch will not kick in and stall the engine...
Posted on Sep 09, 2009
Since the 2000 chevy blazer is equipped with SRS (Saftey Restraint System), ie: Airbags, which is located in the steering wheel. In order to replace the turn signal switch you must remove the steering wheel. Therefore I would only highly advise you to take it to a dealer to have this done.
Posted on Oct 07, 2009
Tips for a great answer:
42 people viewed this question
Usually answered in minutes!