Question about 1993 Eagle Talon
On my '90 4 cyl. auto talon it's right up by the front of the car on the passenger's side. Look down underneath where your air filter is and you'll see the white dipstick handle right close to the gound.
Posted on May 02, 2009
Some manufactures have chosen not to put dipsticks on their vehicles, being if it is not leaking the level will not go down. thus if you don't see a leak there is no reason to check the fluid level. mike
Posted on Jan 04, 2009
Tips for a great answer:
Apr 30, 2013 | 1993 Plymouth Voyager
Mar 02, 2011 | 1993 Toyota Corolla
Feb 10, 2011 | 1993 Saturn SL2
Drive the car for several miles or until the engine has reached its normal temperature, as indicated by the temperature gauge. Position the vehicle on a flat surface, shift the transmission to the "Park" position and apply the parking brake.Raise the hood and allow the vehicle to idle.
Withdraw the transmission's dipstick. The dipstick features a T-shaped handle with the words "Trans. Fluid" stamped into the top of the handle.Wipe the dipstick clean of any transmission fluid with a clean shop rag. As the vehicle is driven, transmission fluid may splash onto the dipstick, resulting in a false fluid level reading.Insert the dipstick into its tube until the handle rests securely against the top of the tube, then withdraw the dipstick and note the fluid level. The fluid level should be at or just below the "Warm Full" mark stamped into the dipstick. If the level is low, fluid must be added.Add Mercon V transmission fluid in small increments to avoid overfilling the transmission. Insert a funnel into the top of the dipstick tube, then pour the transmission fluid into the funnel, periodically checking the fluid level on the dipstick.
Jan 12, 2011 | 2002 Ford Taurus
Sep 27, 2010 | 1993 Ford Ranger SuperCab
Oct 03, 2009 | 1995 Eagle Talon
Jul 13, 2009 | 1991 Eagle Talon
Feb 10, 2009 | 1994 Eagle Talon
Jan 04, 2009 | 1993 Eagle Talon
Jan 09, 2014 | 1993 Eagle Talon
237 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: