Question about 1984 Ford F 250

1 Answer

1989 ford f250 engine swap 5.8

Will a 5.8l from 1995 f250 into a 1989 f250 with a 5.8 with out too much hassle? . The long blocks have different part numbers. I have access to all engine acc incluing wiring and ecm for swap. Motor mounts in same position? Donor truck is an auto and '89 is ZF 5spd any conflict there as far as bellhousing bolt pattern issues?. Thanks in advance.


Posted by on

  • Anonymous Mar 27, 2014

    Engine runs short time and shuts down

  • Anonymous Mar 27, 2014

    Engine runs for a few minutes then shuts down



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 78 Answers

They are the same.The engine with the 5 speed has abushing in the crankshaft.

Posted on Jan 04, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I put my 1989 Honda Prelude engine (auto) into a 1988 shell with manual transmission, and now my revs stay high only when driving and changing gears. Was wondering if it is a vacuum hose issue and how

may need to swap the computer also.. manual computer is different..but yes.. be looking into any vacuum leaks..block off any open ports you find..

Dec 09, 2013 | 1989 Honda Prelude

1 Answer

Can a 1995 5.8 L engine work in a 1991 ford half ton

If the truck has a small block V8 now, and the 5.8 is from a truck, most everything should bolt up. You may have different sensors for the computer. If the truck has something other than a small block now it would take alot of work to change everything over.
A salvage yard could tell you for sure.

Dec 13, 2012 | 1991 Ford F250

1 Answer

89 ford f250 pickup with a 5.8 motor. we replaced the exterior fuel pump and pressure regulator it starts and runs a couple minutes then dies

replace the fuel filters sometimes little particals get into them and clog the fillter after a few mins running it then blocks the opening and strarves the engine for fuel

Aug 01, 2011 | 1989 Ford F 250

1 Answer

I have replaced 8 coils on my 1989 ford f250 truck in the past 2 days and it will not run

What size engine and how many miles on it....Of course you mean it has 1 coil at each plug.?
It sounds like a crank sensor problem...This will make it not start.It is located at the engine block at right front or rear ......Not sure of which engine ?..Please send more info...
....I would love to help

Mar 07, 2011 | Ford F-250 Cars & Trucks

1 Answer

We have a 1992 Ford F250. The engine and transmission work great but the body is all rusted out. We would like to drop our engine etc into a different body. What years can I search for that will work?

1992-1994 are virtually identical, but 1987-91 are pretty close as well. 1995-96(7)

if the frame isnt rusted out to the point of failure, I would just replace the body panels, and cab. cabs from 87-96 are close enough to swap pretty easily, 1980-86 will work too with a little more work. beds 1987-96(7) are identical, 1980-86 will bolt up, but wheelwells are styled different. fenders doors ect are easily available from body shop supply or

Sep 05, 2010 | 1992 Ford F250

2 Answers

What is the spark plug gap for an 1989 ford F250?

Make: FORD
Model: F-250
Year: 1989
Engine: V8 - 5.8L - FI - - GAS

Needed GAP 0.44" Champion Catalog

More details for other engines sizes in Champion Spark Plug

Hope helped (remember rated this help) Good luck.

Oct 16, 2009 | 1989 Ford F 250

1 Answer

Engine swap from 1989 to 1991

In the '89 trucks, the ECM is located behind the driver's side kick panel...right next to the emergency brake.

Mar 15, 2009 | 1991 Ford F250

1 Answer

Electrical. alternator fuse link keeps blowing

The wiring harness coming from the solonoid/power distribution has one small guage wire splitting into three different medium guage wires. I have ran into this problem quite often on mustangs, and what I have found that works is take the split out of it, and run all three wires with fusible links added to them straight from the solonoid

Jul 31, 2008 | 1989 Ford Mustang

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

600 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

78010 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers


Level 3 Expert

5651 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides