Question about 2005 Pontiac Grand Am

1 Answer

1996 2.4l twin cam igniton wiring harness - 2005 Pontiac Grand Am

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Pontiac Master
  • 76,846 Answers

I am sorry but we do not have parts. Please contact a local auto salvage year to find the part is my suggestion.

Posted on Nov 04, 2012


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

If i build a custom harley using a carburated twin cam motor out of a 99' dyna would i have use an aftermarket ignition module? I have the stock module n harness n i did away with the cam shaft position...

i'd try a new coil as power out may not be enough for spark , very difficult to measure coil output as high tension and could easily give you a bad shock or even burn you

May 13, 2014 | Cars & Trucks

1 Answer

How do I get to the cam sensor?

Most early 2 thousands GM models have twin cam sensors. One mounted on the front of the cylinder head and one at the back of the head.(4cyl engines) On V6's and V8's there can be 2 or 4 sensors depending on the make/model/engine. Remove the plastic cover on top of engine and look for a 2 wire harness attached to an enviromental conector that is plugged into the cam sensor.

Oct 10, 2013 | 2000 Pontiac Grand Prix

1 Answer

'97 Chevy K2500 6.5 turbo diesel won't start

pity you did not get a load test on the battery first
dead cells or bad terminals will do what you describe

Sep 21, 2017 | 1997 Chevrolet C/K 2500

1 Answer

I need to no where my igniton control module is located at on my 1992 dodge b250 it has a 318

You have a hall effect pick up coil, it is in the distributor, under the rotor-it has a 4 wire harness that comes out of the cap and plugs into a harness-the pick up coil just lifts out, easy fix.

Jan 27, 2011 | 1988 Dodge B250

1 Answer

Where would i find the crank sensor in a 2.4l twin cam motor

the crank sensor is usually located near the crankshaft of the engine, not on the transmission with wires leading to it.

TESTING Fig. 1: Attach suitable jumper wires between the CKP sensor and CKP sensor harness. A DC volt meter can then be attached to the necessary terminals to test the sensor as the engine is being cranked 91114p21.jpg
Typically, when a crankshaft position sensor DTC is set, checking the integrity of the wiring connecting the sensor (using a digital volt meter) to the PCM harness connector is the best way to determine if the sensor is faulty. If the wires all have continuity, and a DTC is set, it is probable that the sensor is faulty. Although a procedure is given here for testing of the crankshaft sensor itself, it is generic, and may not apply to every vehicle. Typically, the crankshaft position sensor harness connector wire leads are labeled. However, it is advisable to use this procedure in conjunction with the wiring diagrams in Section 6 to identify the terminals on the crankshaft sensor before connecting test leads.
  1. Turn the ignition key OFF.
  2. Unplug the sensor electrical harness and check the terminals for corrosion and damage.
  3. Check the sensor wiring harness wires for continuity and repair as necessary.
  4. Attach the sensor harness making sure it is firmly engaged.
  5. Using a Digital Volt Ohm Meter (DVOM) set on the DC scale, backprobe the sensor signal terminal (terminal A) with the positive lead of the meter and backprobe the sensor ground terminal (terminal B) with the negative lead of the meter.
  6. Have an assistant crank the engine and observe the meter.
  7. You should have approximately a 5 volt reference signal pulse. If not the sensor may be defective.
prev.gif next.gif

Jul 22, 2010 | 1997 Pontiac Grand Am

1 Answer

I can't find the connection point that connects the ingniton swithch to the igniton cylinder

follow the wires down the steering column and up under the dash its one harness and plugs into the pigtail at this point also connects into the turn signal lights wires as well

Feb 06, 2010 | Volkswagen Microbus Cars & Trucks

1 Answer

2003 E350 tach pickup wire??

Tachometer Wire Negative Wire (-): Any Wire That Is Note Red/Light Green. The diesel tach wire is a green/white wire, located in a 5-pin harness held up with tape behind the parking brake release.
Tachometer Wire Negative Wire Location: At Igniton Coils

According to wiring diagrams online... good luck with this.

May 04, 2009 | Ford E-350 Super Duty Cars & Trucks

1 Answer

Igniton switch installation

Remove column cover, remove wiring harness, cut a slot in 2 bolts (originally breaw away bolts) holding swith assembly to steering column ??? remove put in new one

Dec 24, 2008 | 1988 Mazda B2200

1 Answer

1994 Ford Taurus Station Wagon Steering Coulmn Wire Harness

i need to know to how to remove the power steering bracket on a 1994 ford taurus 3.8

Sep 23, 2008 | 1994 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8548 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides