Question about 2001 Subaru Forester

Open Question

2001 subaru forester rear wiper arm - 2001 Subaru Forester

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 2001 subaru forester rear wiper motor replacement

Hi, it is pretty straightfoward (ahem, you know how this can go. depends on whether your wiper arm retaining bolt is frozen and snaps off the shaft or not). First, take a look at your fuse to make sure it is intact. If it is, just gently pop off all of the plastic trim covering the tailgate, and undo screws too as necessary. Then test the connector wires to be sure you are still getting power back there to the motor, I used a $4 test light that I got from AutoZone. Then use a large philips head screwdriver and 10mm socket to remove the whole dang thing.

Posted on Nov 03, 2008

  • 337 Answers

SOURCE: 2001 subaru forester rear wiper motor replacement

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152801a483d

Posted on Mar 12, 2009

  • 507 Answers

SOURCE: rear wiper on 2001 Subaru Forester stopped working

it will be labelled in the fuse box if not just replace any blown fuse,you must check theres power there or youll never know

Posted on Oct 29, 2009

  • 507 Answers

SOURCE: 99 Forester driver's side wiper arm no longer moves w/passengers

the linkage has popped off the back you need to get to it to push it back on ots possibly worn and needs replacing

Posted on Oct 30, 2009

johnjohn2
  • 5763 Answers

SOURCE: The wiper arm on my rear window is broken. How

remove the cover at the bootom of wiper arm,there you will see a nut that holds the arm, remove that nut. grab arm and wigle and pull up on it until it comes off, then install new arm in the same position.

Posted on Feb 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 subaru forester rear tail light moisture



Open the assembly and dry it. I would do so in full sun on a in low humidity and add a clear silicone sealant around the wire connection harness and around the rim of the light cover. The one around the light cover should be thin. If it is still happening, dry it again and place a small amount of baking soda in the assembly. It will settle to the lowest point and should absorb moisture.

Apr 21, 2012 | 2001 Subaru Forester

1 Answer

Rear wiper on 2001 Subaru Forester stopped working


it will be labelled in the fuse box if not just replace any blown fuse,you must check theres power there or youll never know

Jun 05, 2009 | 1998 Subaru Forester

3 Answers

Windshield wiper linkage ball joint white knuckle cap is broken


This is a DIY fix for a dollar. The white plastic caps that join the wiper arms together in the wiper assembly commonly wear and break under normal use. 1984 - 1986 Honda CRX and Civics also used these plastic caps for a short time - much to my dismay. In my 2000 Subaru Legacy and Subaru Forester (should work on 2001, 2002, 2003, and 2004 models as well), there is an easy DIY solution that will take care of the excessive play in the wiper travel, as well as the common 'wiper clunk'.
Head over to your local auto parts store an purchase a PCV Valve grommet for a Toyota. Part number 42058. These are only a dollar, and are normally stocked on the shelf. If you put the phrase 'pcv valve 42058' into to Google Image Search you will see what I mean. I’m attaching a picture as well.
For installation, gain access to the wiper assembly, I recommend removing the entire assembly (arms and motor) from below the black trim piece under the windshield. Inspect all the joints. If you have a loose joint, remove the white plastic cap and the arm from the ball joint. Slide the PCV Valve Grommet over the ball joint and press the arm into the grommet. This is now a perfect, snug fit. Wiper blades slamming into the car is a thing of the past.

Mar 23, 2009 | 1999 Subaru Forester

1 Answer

Rear Wiper Motor


Hi thank's for help .How can I change the rear wiper arm for sequoia 2001,the motor is working but the arm doesn't move look's like the conection with the motor is gone.

Dec 30, 2008 | Subaru Forester Cars & Trucks

1 Answer

Front windshield wipers stall or work very intermittantly when on


It is likely that where the wiper arm is attached to the linkage  it is either loose or stripped.

Dec 23, 2008 | 2005 Subaru Forester

1 Answer

Subaru forester 1999. After heavy snow my wipers are not working.  I can hear the motor for the wipers.  how to reconnect the wipers arms


If you can hear the wiper motor now, that means it was over worked and it partially burned up the motor. There's also a good chance that the wiper linkage has been bent due to the motor trying to push the weight of the snow. I would definitely take it to a shop and have them look at it. I'm just worried about that one bad down pour of rain that would come down while your driving then all of a sudden your wiper motor gives out right in the middle of traffic. I hope this info helps.

Dec 22, 2008 | 1999 Subaru Forester

1 Answer

Arm wiper subaru forester disconected


if the wipers were used to clear the snow then the speed controler may have over heater and the wiper assemberly will need to be replaced

Dec 22, 2008 | 1999 Subaru Forester

1 Answer

99 Forester driver's side wiper arm no longer moves w/passengers


the linkage has popped off the back you need to get to it to push it back on ots possibly worn and needs replacing

Dec 21, 2008 | 1999 Subaru Forester

1 Answer

2001 subaru forester rear wiper motor replacement


Hi, it is pretty straightfoward (ahem, you know how this can go. depends on whether your wiper arm retaining bolt is frozen and snaps off the shaft or not). First, take a look at your fuse to make sure it is intact. If it is, just gently pop off all of the plastic trim covering the tailgate, and undo screws too as necessary. Then test the connector wires to be sure you are still getting power back there to the motor, I used a $4 test light that I got from AutoZone. Then use a large philips head screwdriver and 10mm socket to remove the whole dang thing.

Sep 04, 2008 | 2001 Subaru Forester

Not finding what you are looking for?
2001 Subaru Forester Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...