Question about 2000 Toyota Celica

Open Question

How do u turn the fog lights on a 2000 toyota celica gt

Just need to know where to turn them on at the headlight are fine just got the car and cant find the switch on the dash for the fog lights thanks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: 85 Toyota Celica GT Headlights problem

There is a knob beside the headlights under the hood, fairly good sized, looks like rubber and you can manually turn down your headlights. That happened to my 86 Supra last year and the sync was just off and once I turned them down they started working perfectly. Hope this helps

Posted on Apr 04, 2009

  • 4336 Answers

SOURCE: how do you change a rear main oil seal in a 2000 toyota celica gt

First of all, be certain that the leak is in fact from that seal. many leaks travel to that area.

To change the seal is fairly involved, you need to pull the trans and flywheel. There are some specialzed tools involved. Do you have manual or automatic? Manual requires clutch plate alignment on re assembly, by the way , if manual, be sure to change the release bearing and pilot bearing at minimum. Commonly it would make sense to change the clutch during this process....you're already all the way in there..

Posted on Sep 07, 2009

  • 1986 Answers

SOURCE: I have a 2000 Toyota Celica GT/S. How do you

The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Posted on Sep 30, 2009

  • 1986 Answers

SOURCE: i wanna know how to do, the headlight alignment

The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Posted on Oct 06, 2009

  • 1 Answer

SOURCE: 2000 toyota celica green light on dash board

mine shows that when my lights are on at night

Posted on Mar 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Foggy windows


I have a Toyota and they are not good at fog. go to parts store and rained makes a product fog x easy to apply you apply on the inside its about5 bucks or less it works

Dec 10, 2013 | Toyota Cars & Trucks

1 Answer

2000 Celica GT engine misfires periodically


Hello, it could be an injector problem, try replacing the #2 injector/.

Jul 17, 2017 | 2000 Toyota Celica

1 Answer

Toyota celica 2002 gt coolant reservoir hoses diagram


i got a 2002 toyota celica gt i need to know where do all the hose go i cant find out iv looked everwhere still cant find out

Apr 18, 2012 | Toyota Celica Cars & Trucks

2 Answers

Headlight switch toyota celica


The headlight control switch is on the steering column. To replace the switch remove the plastic trim covers over the steering tube to reveal the switch and connectors. Disconnect the battery negative cable before starting work, this is a must. Below is a picture of the switch.
2_24_2012_4_45_29_pm.jpg

Feb 24, 2012 | 2000 Toyota Celica

2 Answers

2000 Celica GT driver door lock


it could be the door lock acuator going bad it could have a intermittent short

Feb 25, 2010 | 2000 Toyota Celica

1 Answer

Need to replace my headlight on my 2003 toyota celica can get to two of the bolts but cant seem to find the third. any ideas...


Hello !!

well most of the Halogen light bulbs of the headlights are "turn-lock" and have a "o"ring to seal them..

Try to turn the back connector on the back of the headlight (a quarter of a turn) and pull it gently (be sure no to touch the new halogen light bulb with your fingers because it can get contaminated and burn faster)

Good Luck!

Sep 20, 2009 | 2000 Toyota Celica

2 Answers

2002 Grand Am GT Headlights seem dim , fog lights dont work


Check at the headlight sockets for a bad ground.

Mar 02, 2009 | 2002 Pontiac Grand Am

2 Answers

85 Toyota Celica GT Headlights problem


Bad headlight switch or relay, or shorted wire. I would check the relay first.

Feb 07, 2009 | 1985 Toyota Celica

1 Answer

Removal of headlight housing to replace lowbeam bulb.


found this online- haven't tried yet though--
How do you change a headlight bulb on a 2003 Toyota Celica GT? Under the plastic covering the headlight there is a lot of fog and condensation and I want to clean it off, so how do I take off the plastic that covers the headlight?
  • 9 months ago
Seem to be seal is wear off
already on the front cover
The way to open that
1. There is four screws at the back of
the headlights and unscrew them
2. Pull the headlight and dry it
by wiping or heat of the sun or
anything that can release the fog
3. Buy silicon and seal the headlight
gap with silicon and let it dry for a hour
This will help kept away fog
and condensation for sure

Aug 24, 2008 | 2003 Toyota Celica

Not finding what you are looking for?
2000 Toyota Celica Logo

Related Topics:

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...