An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert that has over 10,000 points.
Re: DOOR PANEL REMOVAL
You'll need to remove screws that are by the door handle,
arm rest, under door and side of door and then gently pull back on the
panel as there will also be retaining clips attached and you don't want
to break them. If needed, you can pull back the weather seal
(can't reuse it, but it's not that important) and you will be able to
access everything inside the door
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
CLICKon the following LINK. It has the Diagrams for your Timing Belt that you will need. If you would: Before Clicking let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
All door panels lift staight up after removing all the appropriate hardware; in your case, as well as mine two weeks ago, three screws for the rear doors. DO NOT PRY THE PANEL:OFF. When you slide the door panel up, you will see several L-shaped plastic tabs attached to the backside that engage into slots in the door frame., then hopefully you will be glad you didn't pull the panel straight out instead of sliding it up. GL
This is great as I am doing one of these right this moment and this one has gone long since unanswered and there appears to be no solution.
For the front panel.
1. Remove the two Phillips screws front and rear at the top of the panel. 2. Remove 3 - 4mm Hex head screws in the arm rest, these are expansion fasteners so you will not be able to completely remove the screw. When you have these loose enough the arm rest will slip straight out. 3. Pull interior door handle until you can see the Phillips screw hidden near the hinge and remove. 4. Pull out door handle and carefully release cable from the handle assembly. Be careful with this clip as it can easily be bent and damaged. 5. Start at bottom of door panel and pull the panel straight out, once the bottom is free lift upward until panel comes off.