Question about 2000 Chevrolet Cavalier

Open Question

2000 chevelot cavalier 2200 engine need timing marks

NEED TIMING CHAIN DIAGRAM

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: need timing chain diagram

i have an answer badd_poppy@hotmail.com

Posted on Oct 19, 2008

Ad
  • 34 Answers

SOURCE: have a 94 cavalier 2.2 liter,timing chain

Install the cam sprocket, timing chain, and timing chain cover. Make sure the dot on the crankshaft gear is pointing towards the center of the Camshaft gear bolt. Make sure the hole in the Camshaft gear is pointing towards the center of the crankshaft. Be sure to remove the nail holding the chain tensoner back, before installing the timing cover The round hole in the cam gear is the alignment mark

Posted on Mar 13, 2010

Testimonial: "worked, car is running great now, timing jumped 3 teeth"

ldtrisch
  • 83 Answers

SOURCE: i need to find a

Hope this helps!!!
ldtrisch_4.jpg

Posted on Mar 17, 2011

  • 21 Answers

SOURCE: timing alignment for 2200

2001 chevy cavalier 2.2L VIN-4 If chain broke or jumped: Remove timing cover(helps to remove two bottom studs on cover that pass threw oil pan use the two nuts on them as jam nuts on the studs). Put #1 cyl. t.d.c with crank. timing mark pointing @ center of the chain tensioner. Remove cam shaft pulley remove chain, reinstall pulley and turn cam shaft until cam shaft mark also points to center of tensioner. (I removed valve cover to make sure the two push rods for #1 cyl. relaxed (They turned with two fingers) Install new parts as needed.Connect battery Test run for 5 sec. with covers off.Disconnect battery. Put everything back together.Go to http://www.jasperengines.com/pdf/GM2.2TimingTB.pdf to see timing marks and alignment.

Posted on Oct 12, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Engine timing diagram


Nissan Xtrail 2001 (sr20VET) diagram for timng chain. i forgot to mark the placement for timing chain so i need so information of how to install the timing chain.

Jan 11, 2014 | Cars & Trucks

1 Answer

I need a timing mark diagram for a 1998 chevy cavalier 2.2 engine


This engine doesn't have a belt it has a timing chain
Please follow this link to see another experts answer for the same question.

Jul 02, 2012 | 1998 Chevrolet Cavalier

1 Answer

I am removing the head for rebuild. I need diagram / info on timing marks


Click image for zoom...

zjlimited_1268.jpg

Fig. Align the sprocket timing marks with the alignment tabs on the tensioner during timing chain installation - 2.2L (VIN4 ) engine

Hope this helps (remember to rate and comment this answer).

May 22, 2011 | 2001 Chevrolet Cavalier

1 Answer

I need a timing mark diagram for a chevy cavalier 2.2 engine


The second silver link on the timing chain will align with the mark on the crankshaft at the five o'clock position.
airjer995_65.jpg

The intake cam INT mark should align with the copper link in the 2 o'clock position

airjer995_66.jpg

The exhaust cam EXH mark should align with the other silver link at the ten o'clock position

airjer995_67.jpg

Hope that helps

Apr 26, 2011 | 2005 Chevrolet Cavalier

1 Answer

Can i remove the timing chain tensioner from the top of the motor on a 2000 cavalier 2.2l or is that only with a dual cam?


Hi Friend:

Your Timing Chain Tensioner is located in the Lower Front of your engine.

#1) you'll have to disconnect your negative Battery cable.

#2) Remove the Top Engine cover to give you better access to the Front of Engine.

#3) Then you'll need to remove your alternator and with wiring attached put it off to the Side you might have to tie it with a wire to secure it.

#4) then you'll need to remove your Power Steering Leave the Lines on it and Put it to the sideas well , Tie off if necessary.

#5) then Jack up the front of your car,make sure you Put Good Stands under the car to keep it secure.while you work under it.

#6) then remove the TWO front Oil Pan Bolts Only the very 2-Front ones.

#7) Then directly above the Oil pan front of the Engine you'll see your Crank Shaft Pulley Remove it, You will need a Puller to Remove it.then the Timing Chain Cover, There are Several bolts Holding it on to the front of the Engine.

#8) Remove ALL the Bolts on Timing over, then Take cover Off,It could be a Little Stubborn ,if All bolts are out for sure, Take a Small plastic mallet and Tap the Cover Easily,until it comes off.

#9) Now before you remove anything else there is a Timing Mark on the Cam Shaft and one on the Crank Shaft,NOTE: BESURE you line them marks up,The Cam Shaft Mark should be pointing Straight Down--And the Crankshaft Mark needs to be Pointing Straight up.and Lined up with the Top Timing Mark.If the are Not

NOTE: Rotate the Engine by Hand Turning the Sprockets until they are LINED Up.

Then Take off the Top Cam Shaft Mounting Bolts,then Pull Sproket and timing Chain at the Same Time.

Then Loosen the Chain Tensioner Bolt with out taking it ALL the Way OUT. then remove your Chain Tensioner.

If your this far i Recommend that you Replace The Timing Chain,Cam Sproket and Crankshaft Sproket as well.

If not the Install your new Chain Tensioner,And Just Simply Reverse the Un-Install Directions.To Put All back Together.

Do Replace the Timing Cover Seal. Using Proper Seal Remover and Installer.

Also before you put your Timing cover back on CLEAN the Surfaces of the Engine and the Cover.And Use a Gasket Sealer and Mount to Block ==Lining Up ALL your Timing Cover Bolt Holes. Let it set a Short time a Few Minutes at Least. To prevent Slipping when installing your Timing Case Cover.

1- Last Thing Torque your Timing Chain Tensioner at 89 Inch Pounds.Which rewuires a Torque Wrench.

And Torque ALL your Timing Cover Bolts at 97 Inch Pounds.Do NOT Over Tighten You'll Strip them.

MAKE Sure the Timing Marks are Still lined up.

This will get your Timing Chain Tensioner Replaced. Thanks for using FixYa From: d_hubbs

Aug 17, 2010 | 2000 Chevrolet Cavalier

2 Answers

Timing alignment for 2200


put it on tdc
and go from there
tdc top dead center

May 09, 2010 | 2001 Chevrolet Cavalier

1 Answer

I need to know the timing marks about a 98 cavalier 2.2


1998 Chevrolet Cavalier 2.2L SFI OHV 4cyl

2621f82.jpg

Fig. 1: The timing marks on the sprockets should be in alignment. If not, turn the crankshaft until the marks are aligned

c468191.jpg

Fig. 2: The timing chain tensioner is retained by a Torx head bolt (1) and a regular hex head bolt (2)

a5bfd58.gif

Exploded view of the timing chain and sprockets-2.2L OHV engine
( Where A = Timing Marks ).

I hope help you with this, good luck (remember rated this help).

Sep 16, 2009 | 1998 Chevrolet Cavalier

2 Answers

How to replace a timing chain 2000 chevy cavalier


I am familiar with that vehicle but generally with timing chain replacement, the engine needs full access for pulley and cover removal and in some cases the cylinder head requires removal.
Generally timing chains last so that they only need replacement at engine overhaul and it is not an economic proposition to have to replace a chain unless some relative degree of engine work is also required at that time. 

Engine timing chains generally have a tensioner on them which maintains tension, but some chains can wear significantly and cause timing cover to be "ground away" because of "slop".

If the engine is making the noisy rattle of the timing chain against the cover etc, I would schedule a top overhaul (head, machine, test and valve grind) with the chain replacement dependent on mileage with the degree of action.

Some simple simplex timing chains (type of chain similar to motor bike chain) may be replaced without dismantling the engines but I would expect your chain would be a "duplex" dual sprocket type, these are most common. 
These chains are not generally expensive but replacing them can involve a fair amount of work. 

Good Luck and hope this helps, Others will have different ideas.

May 04, 2009 | 2000 Chevrolet Cavalier

Not finding what you are looking for?
2000 Chevrolet Cavalier Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...