Question about 1993 Lincoln Town Car

1 Answer

Brake lights don't work, hazard, turn, drive, and backup do

Checked fuses, bulbs, replaced switch on brake pedal. Fuse for brakelights s/a for hazard. Hazards work. All elements in rear bulbs work. Is there a fusible link or something in headlight switch that would cause the problem?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Lincoln Master
  • 21,981 Answers

Is this type that uses the indicator bulbs as brake light or the europeon type with seperate lights ??,check for feed to brake light switch first then hold down pedal and for current coming from other terminal.if its all working then check wiring connectors at back where they split to either side what you call pigs tails??if its the other type of wiring where the brake lights also use the indicators then their is some sort of relay but i havent a clue how to check that one out as when i have had american cars to import i have had to rewire to europeon standards .

Posted on Jan 31, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 Chevy Cavalier no brake lights but turn signals/hazards/backups work just fine. any ideas?


WHEN YOU APPLY BRAKE PEDAL, do you see brake lights come on ? if no then the switch is not working fine ! switch turns lights on when you depress the pedal, releasing the plunger, lights go out when you release the pedal. this switch has a fuse @ fuse block. check it ! if ok, and brake lights do
not come on replace switch, & mount properly in bracket.

Mar 08, 2013 | 2001 Chevrolet Cavalier

3 Answers

1994 Chevy C1500 truck. No rear brake lights


Most likely this is a brake light switch issue. Replace switch.

If your emergency flashers don't work, all flasher bulbs are fine, but flashing too fast, then check and replace Hazard light switch.

Oct 29, 2012 | 1994 Chevrolet C1500

1 Answer

No Brakelights


there's a brake light switch o the arm the brake pedal is connected too,it has two wires going to it. hook two wires together if brake lights go on replace switch if not check for power to switch

Jul 07, 2012 | 1996 Land Rover Discovery

1 Answer

My running lights work my turn signals work why don't my brake lights


You either have a bad brake light switch or a bad fuse that powers your brake lights. Go to your fuse panel and check the fuse first. If it checks good then check the brake light switch. The switch will be located on the brake pedal at the top. There should be two wires into the switch. One will have power at all times. as you depress the brake pedal it makes the connection in the switch to the other wire which then sends power to the brake lights and illuminates the bulbs. Use an electrical tester to make sure you have power in and power out when the brake pedal is depressed.

Apr 07, 2012 | 1996 Oldsmobile Cutlass Ciera

1 Answer

1997 olds cutless brake lights will not work. bulbs, fuse and switch are good


Its a faulty turn signal switch.Try this,push down and hold brake pedal while pushing on the hazard switch and if the brake lights come on then replace the signal switch.

Jan 29, 2012 | 1997 Oldsmobile Cutlass Supreme

1 Answer

Brake lights & Hazzard lights don't work; fuse ok... High mounted center brake light works... Turn signals work...suspect problem is multifunction lever Power drain to battery constant...2...


As for the brake lights push brake pedal down while pushing on and wiggling the hazard switch.If the brake lights come on then replace the multi-function switch.

Aug 10, 2011 | 1997 Oldsmobile Bravada

2 Answers

Left turn signal doesnt work and my brakelights


  1. Check the fuse make sure it is not busted and also use a designated amp only.
  2. Check the bulb and the wires also.

Mar 28, 2010 | 1997 Chevrolet Lumina

1 Answer

My brake, hazard and turn lights dont work, i


well u have two seprate problems the hazards and turn signals have a flasher that needs replacing if the fuse is good on the fuse box marked signals .and there is a brake light switch under the dash board near the brake pedal it has two wires on it check the wires make sure they are connected if so replace the brake light switch

Nov 13, 2009 | 2002 Chevrolet Astro

2 Answers

Brake Lights do not work and hazard button is stuck


I could not tell you how many times people have brought their cars into my shop and tell me that they had already checked all fues and they are OK, then I check the car and find a blown fuse or a fuse that is completely missing.

Your dash (Instrument Cluster) illumination lights are powered by the "PARK LP" fuse in the underhood fuse panel - it is fuse number 37 and should be a 20 Amp fuse. If this fuse is blown, your Park lights on the exterior of the car will also not be working. If they are working and your dash lights are not, then the problem is probably in your headlamp switch.

Your Brake lights are powered by the "STOP LAMP" fuse in the instrument panel (IP) fuse block it is a 15 Amp fuse.

Your Hazzard lights are powered by the "HAZZARD" fuse in the (IP) also a 15 Ap fuse.

If both of these fuses are good, then the most likely problem with your brake and hazzard lamps is the multifunction (Turn Signal) switch.

What any of the above has to do with replacing your window regulators remains a mystery.

Jul 20, 2009 | 2003 Pontiac Grand Prix

Not finding what you are looking for?
1993 Lincoln Town Car Logo

274 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Fordexpert

Level 3 Expert

5331 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...