Question about Cars & Trucks
Posted by Anonymous on
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: towbar wiring
they do sell wiring harness for towing applications, however being that your vehicle is a german manufacture no ordinary wire will work because the color codes are usually different from what we use in the states. i would go and get the right wire harness to prevent and shorts from happening..........please rate this..thanks
Posted on Aug 31, 2008
SOURCE: Tow bar wiring
use the wires inside the hatch behind the plastic panel on either side. Wiring for your car is as follows -
Parking Lights YELLOW (-) 1K OHM RESISTOR AT THE STEERING COLUM HARNESS USE A 1KOHM RESISTOR Brake Lights WHITE/TAN (+) AT SWITCH Reverse Lights VIOLET/BLACK (+) 72 PIN CONN POS 6 BEHIND PASS KICK
Good Luck, NGK
Posted on Sep 04, 2008
SOURCE: wiring in a tow bar
First I'm sure that a Festiva should probably only be towing body weight, But if you want to hook up a wiring loom for towing I would suggest buying a 4 lug loom from a auto store, then I would get a chilton or haynes manual to get the wiring diagram (or internet) then wire it up with **** connectors and electrical tape.
Posted on Apr 29, 2009
Trailer socket pin1 (yellow) to left hand indicator (Black/White) at L/H Lamp, Pin2 (blue) to fog (Grey/White) at R/H Lamp, Pin3 (white) to Chassis Earth, Pin4 (green) to right hand indicator (Black/Green) at R/H Lamp, Pin5 (brown) to right hand side light (Grey/Red) at R/H Lamp, Pin6 (red) to brake (Black/Red) at either Rear Lamp, and finally Pin7 (black) to left hand side light (Grey/Black) at L/H Lamp.
Posted on Jul 21, 2009
I assume that the towbar didn't come with a proper wiring kit as, unfortunately there is not a specific connector for the towbar wiring on the x-type, the proper Vehicle Specific Kit plugs into the rear light. There is a power connector with three pins on the left and a grey reverse sensor cut out connector also on the left. but you will either need to use a Vehicle Specific Wiring kit (about £175) or use a bypass relay system.
Posted on Sep 14, 2009
Testimonial: "THANKS FOR THE INFO, VERY HELPFUL CHEERS."
Tips for a great answer:
Apr 01, 2016 | Cars & Trucks
Feb 17, 2016 | Hyundai Cars & Trucks
Jun 18, 2012 | Cars & Trucks
Oct 25, 2009 | 2003 Jaguar X-Type
Sep 15, 2009 | Nissan Pathfinder Cars & Trucks
Aug 30, 2009 | 2006 Jaguar X-Type
Jun 03, 2009 | 2006 Subaru Forester
Apr 29, 2009 | Ford Festiva Cars & Trucks
Mar 25, 2009 | 2005 Honda CR-V
Mar 25, 2009 | 2004 Volkswagen Eurovan
36 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: