Question about 1986 Nissan Pickup 4WD 1986
I put new plugs cap and rotor, and get like 15 to a gal on highway
IF ITS FUEL INJECTED CHANGE THE SPYDER. OTHERWISE YOUR PROBLEM IS FUEL COMPONNENT RELATED INCLUDING A BAD 02 SENSOR THAT MAY NOT BE REGISTERING BECAUSE YOU HAVE A FAULTY CHECK ENGINE LIGHT. TAKE IT TO AUTOZONE AND HAVE THEM CHECK IT EVENTHOUGH THE LIIGHT ISN'T ON
Posted on Nov 04, 2012
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Its just fouled some plugs again. Need an overhaul. If you just put a valve job on it it will just put more stress on the rings and will need it anyway. Not much you can do except change plugs all the time!
God Bless Greg
Posted on Dec 06, 2008
Sounds like a fuel mix problem possibly the oxygen sensor. If it ran like this immediately after the new plugs, I would check to make sure all the plug wires are on the right plugs and secure. Good luck!
Posted on Mar 10, 2010
Hello you will need to replace the spark plugs you quoted it is getting lots of gas so your spark plugs are wet.disconnect your battery while your replacing your spark plugs once finished replacing the spark plugs reconnect the battery now try to start it should start up.
Posted on Jan 10, 2011
Firing order okay? the MAF can do this to you (Mass air flow) a bad connection at the distributor can do this. The distributor connection can do this if the 180 signal is missing going to the ECM. So wiggle test that connection and inspect that male to female connection. The MAF (mass air flow) in this particular year it was called a volume air flow sensor so if this signal is missing signal to the ECM it stumbles the vehicle so wiggle test that connection also check fuseable links and ground for this mass air flow.Rule of thumb a backfire always occur when timing is off giving a lean mixture. and a miss under load is a meaning for not enough fuel.
Posted on Feb 26, 2012
Tips for a great answer:
Feb 12, 2011 | 2003 Oldsmobile Alero
Nov 09, 2010 | 1998 Volkswagen Beetle
Apr 02, 2010 | 2002 Isuzu Trooper
Feb 21, 2010 | 2002 Chrysler 300M
Oct 25, 2009 | 2000 Cadillac DeVille
Sep 09, 2009 | 1989 Dodge Ram D-Series Pickups
Mar 14, 2009 | 1988 Honda Prelude
Jul 29, 2017 | 1986 Nissan Pickup 4WD 1986
Jul 20, 2017 | 1986 Nissan Pickup 4WD 1986
147 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: