Question about 2004 Ford Explorer

Open Question

Pressure control solenoid 2004 ford explorer 4.0

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 5 Answers

SOURCE: 1996 ford explorer v-6 4x4

If you're asking about the electronic pressure control solenoid, it's on the driver side of the valve body. There are 4 sols on that side, it's the one closest to the rear. It's bigger & heavier than the other 3.

Posted on Dec 16, 2008

  • 1 Answer

SOURCE: im looking for an online diagram so i can fix a 96

Im am looking for a online diagram so I can fix a 96 ford explorer 4wd, 6 cly, 4wd transmission control circuit solenoid and answers

Posted on Nov 01, 2009

fairyandtrol
  • 50 Answers

SOURCE: trying to lacate the idle

The idle air control (IAC) valve on my 4.0 L OHV is on the driver's side of the engine mounted on the side of the upper "plastic" intake manifold.
Removing the valve and CLEANING it does wonders for its operation ability.

Posted on Oct 09, 2010

pctech1
  • 1940 Answers

SOURCE: ...my 2002 ford expl. showing

Replace your Pressure Control Solenoid, or take it to a shop and have them replace it. This can cause both of the codes you are experiencing.

Posted on Feb 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Could I get a picture of the pressure control solenoid A or a diagram of the circuit please.


The solenoids on this trans are all part of one solenoid pack they are not serviced separately. You must replace the solenoid pack assembly in order to replace a solenoid.
please note that you will have to empty the trans fluid before carrying out this replace.There is no dip stick.
Please check the link below for its exact location and diagram on your ford explorer.
http://www.allcarhelp.com/2016/05/ford-pressure-control-solenoid-a.html

This will help.

Free Online Car Repair

May 10, 2016 | 2002 Ford Explorer

1 Answer

How do I reset a tire pressure sensor for a 2004 Ford explorer


all vehicals seem to be different actually. look in your owners manual and it will give you the instructions usually but all 4 tires must have the same air pressure or the light wont go off.

Oct 07, 2013 | 2004 Ford Explorer

1 Answer

2002 ford explorer po 775 code


Here is the definition of the code.

Possible causes - Faulty line pressure solenoid B valve
- Line pressure solenoid B valve harness or connectors
- Line pressure solenoid B valve circuit is open or shorted
- Low transmission fluid level
- Dirty transmission fluid
P0775 FORD Description The line pressure solenoid valve regulates the oil pump discharge pressure to suit the driving condition in response to a signal sent from the Transmission Control Module (TCM).
Read more: http://engine-codes.com/p0775_ford.html#ixzz28BUyxuOa

Sep 30, 2012 | 2002 Ford Explorer

1 Answer

I have a 2003 Ford Explorer the o/d light is blinking. I had diagnosis tested ran and came up with PO73 invorrect gear 3 ratio, PO745 Pressure control solenoid malfunction and PO745 Pressure control...


Error Code P0745
  • If the error code checker returns a P0745 code, it is indicative of a transmission issue. Error codes in the 700s refer to transmission problems. The P0745 error code refers specifically to a malfunctioning pressure control solenoid. This should be checked by a mechanic as soon as possible.


  • Read more: Ford 2002 Explorer Error Codes ' eHow.com http://www.ehow.com/list_7610006_ford-2002-explorer-error-codes.html#ixzz1FCgt5JQ6

    Feb 27, 2011 | 2003 Ford Explorer

    1 Answer

    ...my 2002 ford expl. showing


    Replace your Pressure Control Solenoid, or take it to a shop and have them replace it. This can cause both of the codes you are experiencing.

    Jan 12, 2011 | 2002 Ford Explorer

    1 Answer

    My 2002 ford explorer transmission shifts hard from neutral to forward or reverse.


    Check engine light on? Sounds like a bad pressure control solenoid. If it is a bad PCS. You have to replace the solenoid block in the 5R55W transmission.

    Jul 13, 2010 | 2002 Ford Explorer

    2 Answers

    Error code P0745 on a 02 explorer


    P0745 TRANSMISSION 2-3 Pressure Control Solenoid Malfunction
    PULL THE PAN OFF THE TRANSMISSION AND REPLACE THE 2-3 SHIFT SOLENOID, IT IS BOLTED TO THE BOTTOM OF THE TRANSMISSION VALVE BODY

    Nov 06, 2009 | 2002 Ford Explorer

    3 Answers

    What repair is likely required for Code 0796 on a 2002 Ford Explorer?


    P0796 indicates Pressure Controlled Solenoid Switch C malfunction. The solenoid requires replacement.

    Nov 03, 2009 | 2002 Ford Explorer

    2 Answers

    1996 ford explorer v-6 4x4


    If you're asking about the electronic pressure control solenoid, it's on the driver side of the valve body. There are 4 sols on that side, it's the one closest to the rear. It's bigger & heavier than the other 3.

    Nov 08, 2008 | 1994 Ford Explorer Limited

    Not finding what you are looking for?
    2004 Ford Explorer Logo

    Related Topics:

    257 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Ford Experts

    yadayada
    yadayada

    Level 3 Expert

    75822 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    fordexpert

    Level 3 Expert

    5501 Answers

    Are you a Ford Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...