Question about 1994 Plymouth Grand Voyager
I'm having trouble putting on the serpentine belt for a 1994 plymouth grand voyager 3.8 with air.
I know where it goes and can get it on everything but the last pully. I loosened the tensioner and still can't get it fully in place.
Any suggestions would be helpful. Thanks in advance.
Well, first of all you don't "loosen" the tensioner. Tighten that back up. Route the belt as it should go. Put a 15mm open-end or box end wrench on tensioner bolt (in the middle of tensioner.) To make this really easy, I use a "cheater" (a pipe large enough in diameter to go over wrench) to give added leverage to pull down tensioner far enough to slide belt over. Personally, I route the belt over everything except the idler pulley then pull down on the tensioner far enough to slip the belt on the idler. Because of the small cleareance, trying to use a socket on this bolt is almost impossible however, the previous is the method I've learned to be the most efficient.
Posted on May 18, 2009
Tips for a great answer:
Aug 30, 2011 | 1994 Plymouth Voyager
Jul 01, 2010 | 1994 Plymouth Voyager
Mar 03, 2010 | 1991 Plymouth Grand Voyager
Jan 03, 2010 | 1990 Plymouth Grand Voyager
Oct 31, 2009 | 1995 Plymouth Grand Voyager
Oct 09, 2009 | 1998 Plymouth Grand Voyager
Aug 08, 2009 | 1999 Plymouth Grand Voyager
Jun 24, 2009 | 1998 Plymouth Grand Voyager
Mar 05, 2009 | 1993 Plymouth Grand Voyager
247 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: