Question about 2001 Ford F350 Super Duty SuperCab

Open Question

How many starter bolts does a 2001 f350 ford have

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 38 Answers

SOURCE: how do i remove starter on 2001 ford f350 dually (7.3 l powerstroke)

Starter

Removal & Installation 1. Disconnect the positive and negative battery cables.
2. Raise and safely support the vehicle.
3. Remove the starter terminal cover.
4. Remove the terminal nut and separate the battery starter cable from the starter motor.
5. Disconnect the solenoid (S) terminal connector, if equipped with a starter mounted solenoid.
ø To disconnect the hard-shell connector from the solenoid (S) terminal, grasp the plastic shell and pull off; do not pull on the wire. Pull straight off to prevent damage to the connector and (S) terminal.
6. Remove the starter motor retaining bolts.
7. Remove the starter motor from the vehicle.
To Install:
8. Place the starter motor in position and install the starter motor retaining bolts. Tighten the bolts to 15-20 ft. lbs. (20-27 Nm).
9. Install the battery starter cable and a terminal nut to the starter motor. Tighten the terminal nuts to 79 inch lbs. (9 Nm).
10. Connect the solenoid (S) terminal connector, if equipped with a starter mounted solenoid.
11. Install the starter solenoid safety cap. If equipped.
12. Lower the vehicle.
13. Connect the positive and negative battery cables.
14. Start the engine several times to check starter motor operation

Posted on May 27, 2009

  • 50 Answers

SOURCE: How do I replace the

remove battery cables from battery then with a wrench remove starter,then remove wires

Posted on Aug 09, 2010

SOURCE: What size bolts hold the

Almost all automotive bolts,for the last 30 years are metric.
You need every size wrench and socket ,to work on todays vehicles
Also,you will need a good selection of Torx drivers

Most common bolts are 10,13 & 15 mm

Posted on Nov 05, 2010

  • 7353 Answers

SOURCE: how many bolts hold the

2 or 3

Posted on Nov 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace starter in 1995 ford f350 7.3 diesel


its stuck in place hit it with a hammer to jar loose

Aug 17, 2014 | 1995 Ford F350

1 Answer

How do i install a starter on a 2001 ford ranger ?


It is a simple task. First make sure to disconnect the battery's negative cable from the battery. Unbolt the starter wiring. Hold the replacement starter in position and make tighten the bolts. Bolt the starter wiring to the new starter. You can get starter for 2001 ford ranger at http://www.buyautoparts.com/autoparts/2001/Ford/Ranger/Starter.html

Jul 04, 2011 | 2001 Ford Ranger Regular Cab

1 Answer

2001 ford f350 disel starts by it self why


it has 2 b geting power 2 the starter soliond check power line 2 the starter 4 a bare spot hiting another wire it hase 2 b the wires going 2 the starter someware disels run hot and melt plastic coating if 2 close

Apr 04, 2011 | 2001 Ford F350 Super Duty SuperCab

2 Answers

How do you take out at transmission for a manual 1995 ford f350?


u have to remove the drive shaft all the wires there are like 8 or 12 bolts make shore you have a transmither=n jack and just unbolt it

Dec 13, 2010 | 1995 Ford F350

1 Answer

How to remove the starter from a 2003 f350 6,0 L


VERY EASY TASK , DISSCONNECT BATTERY, REMOVE THE 3 BOLTS ATTACHING THE STARTER TO THE ENGINE , REMOVE THE SMALL S WIRE FIRST THEN REMOVE THE LARGE RED WIRE . REINSTALL IN REVERSE ORDER ..

Aug 06, 2010 | 2003 Ford F350 Super Duty DRW SuperCab

1 Answer

How many bolts on a 1992 ford diesel 7.3 starter and how do you remove them


there are 3 bolts holding your starter on. i suggest a socket, long extension and a ratchet for the top hard to reach bolt. wrench works fine on the other 2 bolts

Feb 07, 2010 | 1992 Ford F350

1 Answer

How do i remove starter on 2001 ford f350 dually (7.3 l powerstroke)


Starter

Removal & Installation 1. Disconnect the positive and negative battery cables.
2. Raise and safely support the vehicle.
3. Remove the starter terminal cover.
4. Remove the terminal nut and separate the battery starter cable from the starter motor.
5. Disconnect the solenoid (S) terminal connector, if equipped with a starter mounted solenoid.
ø To disconnect the hard-shell connector from the solenoid (S) terminal, grasp the plastic shell and pull off; do not pull on the wire. Pull straight off to prevent damage to the connector and (S) terminal.
6. Remove the starter motor retaining bolts.
7. Remove the starter motor from the vehicle.
To Install:
8. Place the starter motor in position and install the starter motor retaining bolts. Tighten the bolts to 15-20 ft. lbs. (20-27 Nm).
9. Install the battery starter cable and a terminal nut to the starter motor. Tighten the terminal nuts to 79 inch lbs. (9 Nm).
10. Connect the solenoid (S) terminal connector, if equipped with a starter mounted solenoid.
11. Install the starter solenoid safety cap. If equipped.
12. Lower the vehicle.
13. Connect the positive and negative battery cables.
14. Start the engine several times to check starter motor operation

May 27, 2009 | 2001 Ford F350 Super Duty SuperCab

Not finding what you are looking for?
2001 Ford F350 Super Duty SuperCab Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...