Question about 2008 Honda Pilot

Open Question

How to replace the fog light housing on a 2007 Honda Pilot

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: steps to reset 2007 honda pilot oil gauge

From page 232 in the 2007 Honda Pilot Owners Manual.

1. Turn the ignition ON.
2. Press the Select/Reset knob until the engine oil life indicator is displayed.
3. Press the Select/Reset knob for more than 10 seconds. The engine oil life and maintenance item code(s) will blink.
4. Press the Select/Reset knob for another 5 seconds. The maintenance item code(s) will disappear, and the engine oil life will reset to "100".

Posted on Apr 23, 2009

Ad
johnjohn2
  • 5763 Answers

SOURCE: radio error Honda Pilot code

the code should be with your owners manualy its on a card the size of a business card.there will be # s on it, make sure you follow directions in manualy on how to enter code,also you might be able to call dealer, give them your cars vin # and they sometimes will give u a code.good luck.

Posted on Oct 02, 2009

philschneide
  • 448 Answers

SOURCE: replace fog light bulb for 2006 Honda Odyssey

Touring Model
Use a wrench to remove the mounting bolt from the underbody through the hole in the splash shield.
Remove the fog light assembly from the bumper by pulling its inner edge first, then the whole assembly out of the bumper.
Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down.
Remove the bulb from the fog light assembly by turning it one quarter turn counterclockwise.
Push the electrical connector onto the new bulb.
Turn on the fog lights to test the new bulb.
Reinstall the fog light assembly into the bumper. Tighten the mounting bolt.
Insert the new bulb into the assembly and turn it one-quarter turn clockwise to lock it in place.
Hope this helps you.

Posted on Nov 22, 2009

  • 1779 Answers

SOURCE: 2003 Honda Pilot: Trying to replace brake light

Remove the 2 philips head screws, which are accessible when the tail gate is opened. There are 2 mounting tabs that hold it in place, wiggle the entire unit to remove it.

Posted on Nov 27, 2009

  • 1 Answer

SOURCE: aux input jack on 2007 honda pilot

If you see and AUX button but don't see the jack then its on the back of the head unit. You need to take the dash apart to pull it out to get the aux jack. Search online for instructions.

Posted on Jan 21, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why won't it start?


Honda Pilot 2005 won't start dead starter - YouTube

? 2:48
https://www.youtube.com/watch?v=tH2rEYLbQrY
Sep 15, 2011 - Uploaded by Alexey Gavrilov
Honda Pilot 2005 won't start dead starter ... How To Replace a Starter 2006 Honda Odyssey -EricTheCarGuy ...

Today my Pilot won't start! - Honda Pilot - Honda Pilot Forums

www.piloteers.org > ... > General > Problems
Mar 13, 2011 - A half-hour later, I got in to move it back, and the Pilot would not start. All the .... Most original batterys from 2005 need to be replaced by now. Starting Problem 2005 EX
Feb 24, 2011
Cold Weather (0 deg F) 06 Pilot won't start after jump - Honda ...
Jan 17, 2009
Engine won't start - clicking sounds and guage flutter - Honda ...
Dec 23, 2007
Starting Problems
Mar 24, 2006
More results from www.piloteers.org

Thread: '05 EXL won't start - HondaSUV.com Forums



Jan 01, 2016 | 2005 Honda Pilot

2 Answers

How do i reset my manint req's light after an oil change on a 2003 Honda pilot


Reset oil service light Honda Pilot. From years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.
How do you reset oil service light Honda Pilot. From years: 2003, 2004, 2005.
  1. Turn off the engine. Press and hold the SELECT/RESET button in the instrument panel and turn the ignition switch to run (one position before starting).
  2. Hold the button for at least 10 seconds, until the indicator resets.
  3. Turn the ignition off and then start the engine to verify the indicator has been reset.
How to reset oil service light Honda Pilot. From years: 2006, 2007, 2008, 2009, 2010, 2011, 2012.
Resetting the Engine Oil Life Display if maintenance service is done by someone other than your dealer, reset the maintenance minder as
follows:
  1. Turn the ignition switch to the ON (II) position.
  2. Press the select/reset knob repeatedly until the engine oil life is displayed.
  3. Press the select/reset knob for about 10 seconds. The engine oil life and the maintenance item code(s) will blink.
  4. Press the select/reset knob for another 5 seconds. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.
All information is taken from the Honda Pilot owners manual.

Mar 09, 2015 | 2003 Honda Pilot

1 Answer

My 2007 Honda Pilot won't start, what Might it be?


Does the car turn over at all? If not, and the battery is more than 3 years old, my guess would be the battery needs replacing. Check the battery connections. Remove the battery cables, one at a time and use a wire brush to remove any corrosion between the terminal and the battery post.

Jan 18, 2015 | 2007 Honda Pilot EX-L

1 Answer

My honda 2007 pilot engine light comes on atm light it say what does that mean


What OBD Codes are present & what does it
say on the internet, when you look them up ?

Sep 30, 2014 | 2007 Honda Pilot

1 Answer

How do I replace a fog light bulb on a 2007 Toyota Camry SE


Should b able to unbolt/unscrew skid plate if it has it and go in behind the light..may b tabs or little bolt/screws holding it on...some fog lights come w interchangeable bulbs that u twist out from the housing...some u have to replace whole housing..not sure of the exact setup but that's where I'd start

Sep 06, 2014 | Cars & Trucks

1 Answer

2007 hyundai azera how to replace fog light


You have to turn the right or left wheel inside "whichever fog lamp needs replacing" and the light housing should be exposed on front of wheel housing.

Mar 14, 2012 | 2007 Hyundai Azera Limited Sedan

1 Answer

My 2007 honda pilot while running the vsa light come on and then the engine light come on and the lose power


My 2007 Honda pilot did the same thing. I took the above advice regarding the oil condition (mine was obviously poor, although I change it every 3 mos) and had it changed immediately. The engine light, VSA light, and the triangle with ! all cleared and the vehicle began to run properly again. No problems since. Thank you to Shawn Bruns!!

Mar 27, 2011 | 2005 Honda Pilot

1 Answer

How do you replace the fog light bulb on 2008 avalanche


    • 1 Open the hood and reach down into the engine bay for the fog light assembly. If you cannot reach the fog light assembly from the top you may need to get underneath the truck to reach it. Remove the electrical plug running to the fog light ballast.
    • 2 Remove the bulb. Unlock the fog light bulb by turning it counterclockwise and pulling it straight out of the assembly.
    • 3 Slide a new bulb into the fog light assembly. The part number you will need for the new bulb will be located on the ballast or base of the old bulb.
    • 4 Turn the bulb clockwise to lock it into the fog light housing.
    • 5 Reconnect the electrical connector to the bulb ballast.

Jan 23, 2011 | 2007 Chevrolet Avalanche LTZ

1 Answer

How to change fog lights bulbs on my 2005 honda


548ae69.gif
  1. Remove the fog light mounting screw.
  2. Disconnect the connector from the fog light.
  3. Turn the socket about 45° counterclockwise and remove it from the housing.
  4. Remove the bulb from the socket.
To Install:
  1. Install the bulb in the socket without touching the glass with bare hands.
  2. Turn the socket about 45° clockwise to install it.
  3. Connect the connector to the fog light.
  4. Install the fog light mounting screw.

Jul 14, 2009 | 2005 Honda Odyssey

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...