Question about Cars & Trucks

Open Question

My ac on 2006 mk5 tdi jetta will only work when the car is up to temp and the fans come on. the fans do not come on when the engine is old and the ac is turned on(but not blowing cold air). is this a fan issue or a compressor/switch issue. What from the ac tells the fans to come on?

Posted by on

  • Katrina O'Halloran
    Katrina O'Halloran Nov 03, 2012

    by not working i mean the compressor does not run. when it does it works very well

×

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 62 Answers

SOURCE: 2006 Jetta TDI cooling fan issues

When A/C is on, both fans should be on all the time. If one is not, probably a dead fan. Replace said fan.

Posted on Jul 07, 2009

drsinister69
  • 2317 Answers

SOURCE: Electric Radiator Fan Does Not Come On

DTC P0480 - COOLING FAN CIRCUIT

Circuit Description

The cooling fan is controlled by PCM through the fan relay based on inputs from ECT sensor, IAT sensor, A/C selector switch, A/C refrigerant pressure switch and vehicle speed sensor. PCM controls cooling fan by grounding cooling fan control circuit which turns on cooling fan relay.

The fan relay will be commanded on when ECT reaches 223°F (106°C) or greater, A/C is requested or vehicle speed is less than 38 MPH. Cooling fan relay will also be commanded on regardless of vehicle speed when a DTC is set requesting cooling fan to be on, ECT is 304°F (151°C) or greater, or A/C refrigerant pressure is high. Cooling fan may also be commanded on when engine is not running, on certain conditions.

Conditions for setting DTC:

Battery voltage greater than 9.5 volts.

Cooling fan fault line detects a malfunction for 6 seconds.

1. Check the cooling system. Ensure coolant level and belt tension are correct. Adjust/repair as necessary. After repairs, go to step 23). If no adjustment or repairs were required, go to next step.

2. Turn ignition on, with engine off. Using scan tool, check if cooling fan is operating with ECT at less than 209°F (98°C). If cooling fan is off, go to next step. If cooling fan is on, go to step 4).

3. Command cooling fan relay on. If cooling fan operates, go to step 23). If cooling fan does not operate, go to step 5).

4. Turn ignition off. Disconnect PCM harness connector. If cooling fan turns off, go to step 23). If cooling fan does not turn off, go to step 6).

5. Disconnect cooling fan relay harness connector. Using a test light connected to ground, probe battery feed circuits in relay harness connector. If test light illuminates on both terminals, go to step 7). If test light does not illuminate on both terminals, go to step .

6. Disconnect cooling fan relay harness connector. With test light connected to ground, probe battery feed circuit in relay harness connector. If test light illuminates, go to step 9). If test light does not illuminate, go to step 10).

7. Connect a jumper wire between cooling fan relay battery feed and cooling fan battery feed circuit. If cooling fan operates, go to step 11). If cooling fan does not operate, go to step 12).

8. Repair open in battery feed circuit. After repairs, go to step 23).

9. Repair short to voltage in cooling fan battery feed circuit. After repairs, go to step 23).

10. Connect test light battery voltage and probe cooling fan control circuit. If test light illuminates, go to step 13). If test light does not illuminate, go to step 21).

11. Connect test light to battery voltage and probe cooling fan control circuit. Using scan tool, command cooling fan on. If test light illuminates, go to step 14). If test light does not illuminate, go to step 15).

12. With jumper wire still connected, disconnect cooling fan harness connector. Using test light connected to ground, probe cooling fan battery feed circuit. If test light illuminates, go to step 16). If test light does not illuminate, go to step 17).

13. Repair short to ground in cooling fan control circuit. After repairs, go to step 23).

14. Check terminals to cooling fan relay. Repair as necessary. After repairs, go to step 23). If terminals are okay, go to step 21).

15. Check cooling fan control circuit for open or poor connection. Repair as necessary. After repairs, go to step 23). If circuit or connection is okay, go to step 22).

16. Connect test light to battery voltage and probe cooling fan ground circuit. If test light illuminates, go to step 1. If test light does not illuminate, go to step 19).

17. Repair open or poor connection in cooling fan ignition feed circuit. After repairs, go to step 23).

18. Check for poor connections at cooling fan harness connector. Repair as necessary. After repairs, go to step 23). If connections are okay, go to step 20).

19. Repair open or poor connection in cooling fan ground circuit. After repairs, go to step 23).

20. Replace cooling fan motor. After replacing cooling and motor, go step 23).

21. Replace cooling fan relay. After replacing relay, go to step 23).

22. Replace PCM. Program replacement PCM using required equipment. After replacing PCM, go to next step.

23. Turn ignition on, with engine off. Command cooling fan on. If cooling fan operates, system is okay. If cooling fan does not operate, repeat step 1).

Posted on May 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jetta 1.9 TDI 2006 the cooling fan comes on five minutes after starting


sounds about right if in heavy traffic or hot day


the air con one comes on with air con

engine cooling fan on sooner than normal

things to check
check coolant level
replace thermostat
fan relay or resistor
check coolant hoses and clamps for leaks
faulty thermostatic fan motor switch



26338552-cx3cpzz21matgvw0hfgh5hid-4-0.jpeg

26338552-cx3cpzz21matgvw0hfgh5hid-4-1.jpeg

26338552-cx3cpzz21matgvw0hfgh5hid-4-3.jpg

Nov 03, 2016 | 2006 Volkswagen Jetta

1 Answer

Fan only turns on when ac is in use


The radiator fan should come on when the engine temp reaches 220 degrees - - is it ?

Sep 22, 2012 | 2001 Volkswagen Jetta TDI

1 Answer

2002 Jetta 1.8T blew 40A cooling fan fuse - overheated, destroyed 4 way cooling hose connector - replaced all- now it still runs very hot, inside temp reads 190 (but temp is much higher), cooling fans run...


Then replace the thermostat, because if on lower hose not hot and on upper hose scalding hot = antifreeze flow blocked by the thermostat wich remains closed!!!

Thermostat replacing:


413fc22.jpg

bcb80e7.jpg

2115de6.jpg

55c2a88.jpg

Aug 27, 2010 | 2002 Volkswagen Jetta TDI

1 Answer

My 2006 tdi idling speed is constant but sometimes


when you turn on the a/c the ecm increases engine fuel to compensate for extra load could possibly be a vacuum leak

Oct 15, 2009 | 2005 Volkswagen Jetta

1 Answer

2006 Jetta TDI cooling fan issues


When A/C is on, both fans should be on all the time. If one is not, probably a dead fan. Replace said fan.

Jul 05, 2009 | 2005 Volkswagen Jetta

2 Answers

2003 VW Jetta 1.8t (turbo) Cooling fans will not turn on until temp is @ 230 degrees & sometimes even higher _ both fans will come on together & both come on together anytime the ac is on _ what...


fan relay control module and replace both high and low speed fans. and thats normal for the fans to come on with the a/c on thats what cools the ac condenser

Jul 01, 2009 | 2003 Volkswagen Jetta TDI

1 Answer

Will a faulty coolant temp. sensor keep a/c from working? 02 tdi


no it should not it controls your air/fuel mixture and your timing put your heater control on defrost air to high does ac start

Jan 11, 2009 | 2000 Volkswagen Jetta TDI

3 Answers

2006 Jetta overheating and no a/c - both cooling fans not working


fans and modules are kind easy to do but you will have to find someone in your area to do them... you might state what town and state yopu are in so people know.

Aug 01, 2008 | 2006 Volkswagen Jetta

2 Answers

2003 Jetta


Hi Kevin,
I hope it stays fixed. If it does, I'd appreciate a rating when you have the time. Cheers, D.

Jul 20, 2008 | 2003 Volkswagen Jetta TDI

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...