Question about 2005 Dodge Ram 1500

Open Question

How to replace and remove the dipstick tube for the dodge ram 1500 series 2005

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

s_s_m_o_k_i_
  • 162 Answers

SOURCE: Oil Dipstick tube is broke, Where does it go?

http://carservicemanuals.blogspot.com/2008/06/download-dodge-ram-2005-service-manual.html

Posted on Jul 27, 2009

clifford224
  • 1975 Answers

SOURCE: need to know where the

3 different engines but 2 are in the same location. I gave you diagrams for them both. I hope this helps you and good luck.



clifford224_370.gifclifford224_371.gif

Posted on May 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change the tps on 2005 dodge ram 2500 5.9L


I believe you take your intake tube off of your throttle body and its mounted to the plate on the throttle with two torx screws. Unplug it unscrew it. Install new one and plug it in. Make sure to remove the negative battery cable from battery before touching any electric parts.

Apr 09, 2014 | 2005 Dodge Ram 1500

2 Answers

2005 dodge ram 1500 hemi blown head gasket replacement diy


pcv blockage pcv positive crankcase valve maybe a collapsed hose in your pcv system

Nov 06, 2012 | 2005 Dodge Ram 1500

1 Answer

Need to know where the oil tube dipstick goes on a 2005 dodge ram 1500.


3 different engines but 2 are in the same location. I gave you diagrams for them both. I hope this helps you and good luck.



clifford224_370.gifclifford224_371.gif

May 04, 2011 | 2005 Dodge Ram 1500

1 Answer

I need a oil dipstick replacement. How long is the dipstick suppose to be ?


Check out your local junk yards...You'll be amazed what you can find. $2-$4 for an oil dip stick.

Apr 19, 2011 | 2005 Dodge Ram 1500

1 Answer

Where is the dipstick tube located on an 03 dodge 1500 4.7 on the motor


THE DIPSTICK SHOULD BE EITHER ON THE LEFT OR RIGHT SIDE OF MOTOR! COULD BE SHORT! JUST HAVE TO LOOK FOR A T SHAPED HANDLE, OR A ROUND RING! SHOULD BE TOWARD MIDDLE OR FRONT SIDE OF MOTOR! IF IT IS AUTOMATIC, THE TRANSMISSION DIPSTICK, WILL BE AT THE PASS. SIDE REAR OF ENGINE!

Feb 20, 2011 | 2004 Dodge Ram 1500

1 Answer

I have a po405 code , egr position sensor cuircuit high ,how do i change a egr valve on a 2006 dodge ram 1500?


Easy stuff my friend.use a 10mm socket and unbolt it from the head.also there's a tube and an 8mm socket can be used to remove them.4 bolts in all and replace the 2 gaskets.Erase the code if possible as well.

Dec 15, 2010 | 2005 Dodge Ram 1500

1 Answer

Oil Dipstick tube is broke, Where does it go?


http://carservicemanuals.blogspot.com/2008/06/download-dodge-ram-2005-service-manual.html

Jul 27, 2009 | 2005 Dodge Ram 1500

1 Answer

Oil pump replacement


If the pan is not broken free all the way around, you will need to make sure it is. Then the oil pump pick up tube is going to mess with you, and you may have to turn the crank manually to get the crank journal out of your way. Drop the pan down and forward only -Ned_

Jul 08, 2009 | 2005 Dodge Ram 1500

3 Answers

Where is the egr flow sensor on a 2005 dodge ram


I just took mine to the auto part store to find out. From what they told me its the little box on top of the Hemi Engine cover. They said I have to go to the dealer to get the part though.

Apr 10, 2009 | 2005 Dodge Ram 1500

2 Answers

2005 Dodge 1500 code p0404 EGR valve.


The electronic EGR valve and solenoid assembly is attached to the rear of the left cylinder head ,

  1. Remove electrical connector (5) at top of EGR valve solenoid.
  2. Remove tube mounting bolt (1) at intake manifold.
  1. Remove two bolts (4) connecting EGR tube (1) to valve assembly.
  2. Remove gasket located between EGR tube flange and EGR valve assembly.
  3. Remove two EGR valve mounting bolts (5).
  4. Separate valve assembly (3) from engine.
  5. Remove and discard metal gasket located between cylinder head and valve assembly.
INSTALLATION
  1. Clean area at rear of left cylinder head where it joins base of EGR valve.
  2. Clean EGR tube where it joins EGR valve.
  3. Position new gasket between EGR valve and cylinder head.
  4. Position EGR valve to cylinder head. Install and tighten two bolts (5). Refer to Torque Specifications.
  5. Position new gasket between EGR tube flange and EGR valve assembly.
  6. Position EGR tube (1) to side of EGR valve and into intake manifold.
    1. Install EGR tube flange bolt (1) at intake manifold. Tighten bolt. Refer to Torque Specifications.
    2. Connect electrical connector (5) to top of EGR valve solenoid (2).Do a final tightening of two EGR tube bolts (4). Refer to Torque Specifications

Feb 05, 2009 | 2005 Dodge Ram 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

386 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...