Question about 2004 Mitsubishi Lancer

1 Answer

Where is the washer pump fuse

How do you change the washer pump fuse

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Master
  • 1,007 Answers

I don't think it has it's own separate fuse, but will share the fuse of another system. Check all fuses.
This failure of the pump however is most likely not a fuse issue, but a simple failure of the pump in 99 percent of failures. Check power to the pump with a multimeter and someone in the car operating the washers. If power is present, then simply replace the pump. Be careful not to split any rubber sealing washers when re-assembling. If stiff to insert, then use a little rubber grease or spit to allow easy insertion.

Posted on Nov 04, 2012


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2009 buick lucerne washer pump not working changed pump and fuses are good

Before changing the pump did you test for B+ voltage at the pump and check the ground circuit . Jump B+ voltage to see if it runs ? Does it have the heated washer system ? How about the washer relay , did you check it ?
With the ignition in the ON position, accessory voltage is supplied through the 25A WPR fuse to the WIPER relay, the WIPER HI relay and the WSH relay that are all located in the under hood fuse block.

Dec 19, 2016 | 2009 Buick Lucerne

1 Answer

Washer pump fuse repeatedly burns out

Your pump needs to be replaced, try a 15 amp fuse, if that blows you definitely need a pump. The pump is failing and is pulling more amperage than designed.

Sep 09, 2015 | 2009 Chevrolet Chevrolet Equinox LS

1 Answer

Windshield washer pump not working.

in engine compartment fuse panel.

Dec 18, 2013 | 2004 Mercury Grand Marquis

1 Answer

96 tl, no wiper fluid coming out. is there a separate fuse for the fluid or is it the same as the wiper motor. If so where is the fuse, or where is the pump if i need to change it

you add fluid all the time so you do know where the tank is ! (engine bay)
see pump at bottom of tank?
many cars its the same as the wiper fuse.
why no just look at them all, its in the cab fuse box.

if the pump buzzes, it is probably ok, remove hose, does it pump water now? hose at pump is in near bottom of tank.
got a sun roof, they are diffrent
the sun roof , can kill the washer, via the sun roof washer relay cut out.
fuse 18 runs front wiper and washer
the roof premissive relay is FuSe 5 ,marked "wiper-washer" (roof)
now on no roof cars, that is different
fuse 6 runs it all. marked wiper-washer 30amps.
complex, huh
use and see it all ... ever bit,

see the no buzz tests

Oct 25, 2013 | Acura TL Cars & Trucks

1 Answer

What fuse is it to fix windscreen washer pump vauxhall astra 07

normally you have to change the little water pump on the washer bottle

Feb 07, 2012 | Cars & Trucks

1 Answer

What fuse works the windshield washer pump on a 2006 mustang

No they use the same fuse. The pump motors do go out. they are easy to change

Jan 04, 2012 | 2006 Ford Mustang

1 Answer

Can't get the windshield washer fluid pump to work

make sure you have washer fluid then check fuses and electrical connections to washer pump and hose connections if that doesent work you will need to change the washer pump good luck

Dec 09, 2010 | 2005 Hyundai Elantra

1 Answer

Windshild washer fluid not squirting in front.

They use same fuse, See if you hear it running when you depress the washer button. If not, check for power at the Dark Blue Wire at the washer pump. If it has power, and the Brown wire is grounded. then the washer pump should work, if it doesnt , replace the pump. The washer pump Dark Blue wire shoul dbe hot and the switch grounds the Brown wire.

Dec 16, 2009 | 1997 Plymouth Voyager

1 Answer

Winscreen washer failure

Before you change the pump make sure it is not something as simple as a fuse replacement. I was told that if the wipers still function then the system fuse (usually a 30A fuse) was not blown.

Here is step by step to get at washer pump

1. Remove drivers side front wheel 2. Remove inside fender wheel well covering (about six to eight screws) 3. Upon removing cover you will note to left of wheel the plastic washer reservoir. Located behind this reservoir are the pumps. 4. Unscrew reservoir bolts and pull reservoir loose from grommet at top of fill container. Also at this time you can now disconnect the water level sensor plug that plugs in to the left side of the reservoir 5. Pull reservoir out and you can now locate pumps. If the pumps are bad, this is an easy fix of disconnecting the electrical connects, disconnecting the water lines and pulling th pump out of the reservoir fitting. 6. Replace new motors and reassemble in reverse order.

Nov 04, 2009 | 1998 Audi A4

Not finding what you are looking for?
Cars & Trucks Logo

464 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

79123 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides