Question about 1999 Ford Taurus

1 Answer

Replace front door on 99 taurus

Im having trouble with disconnecting the wiring between the door and the car.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 5,256 Answers

Every wire going into the door will have a connector inside the door that must be disconnected (windows, locks, mirror, etc.) Pull off the inner door panel and disconnect all the wires where they connect to a switch or a controller. Then push the wire harness back out the door opening where the wires go in. Now you can continue with replacing the door

Posted on Nov 04, 2012

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 120 Answers

SOURCE: Front left turn signal bulb replacement on 99 taurus?

take the headlight assbly. out two bolts on top under hood

Posted on Feb 14, 2009

  • 15 Answers

SOURCE: Door removal of 2001 Ford Taurus

you have to take the panel off and unplug everything first

Posted on Mar 12, 2009

  • 2 Answers

SOURCE: replace a a/c unit on a 99 taurus

do you need somone to replace it for cheap

Posted on Apr 04, 2009

  • 18 Answers

SOURCE: 99 Taurus dies quickly and random windshield wipers

u need a new relay switch in the inside fuse box. it stores power and when it goes bad it drains the battery and the windows are because of a factory recall on the switch and has nothing to do with your problem. the rrelay switch is a big black square one and probably clicks alot after you park and get out of the car you will have to listen for it.

Posted on Nov 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

97 ford taurus gl , trouble shooting no heat. Just replaced the water pump but I dont have any heat... where do I start looking???


Electric Blend door.....notorious for going bad on the Tauruses. It's in front of the floor console. don-ohio

Mar 17, 2017 | Ford Cars & Trucks

1 Answer

My 1998 taurse stop on way work last week i go napa get rebuilt alternator. Instaled it . Dont work Dam i did this 3* i went orylies got new one same thing i replaced my battery now im at my 4new...


There is a fuse/relay panel at the front of the car, under the hood. On the side of it, there is a little door that pulls up. under the door there is a 175 amp fuse. Replace it.

Dec 28, 2014 | 1998 Ford Taurus

1 Answer

Remove the front door from car on 1994 ford taurus


I would think you have to feed it all out from inside the door

Remove the door panel & check out the wiring

Nov 19, 2012 | 1994 Ford Taurus

1 Answer

Hello i have a 2003 x type 2.5 v6. had to repair rocker panels below a- pillar, needed to remove l/r door on front of car, disconnected fuse #99, welded sheet metal rockers on vehicle, did body/paint re...


During the welding process you probably burnt thru the wires that lead to these accessories The fuses for these accessories are under the dash very near the A pillar.

Apr 14, 2011 | 2003 Jaguar X-Type

1 Answer

Need instructions to replace the passenger side mirror and the driver side tail light on a 1999 Ford Taurus 4-door sedan. Thank you, Gary S.


Section 01-09: Mirrors, Rear View 1999 Taurus/Sable Workshop Manual REMOVAL AND INSTALLATION Procedure revision date: 06/25/1998 Mirror, Power-Outside Rear View Removal
  1. Disconnect battery ground cable (14301).
  1. Remove front door trim panel (23942). Refer to Section 01-05.
  1. Remove radio speaker grille from cover assembly by squeezing or pinching between thumb and index finger.
  1. Remove two screws from cover assembly.
  1. Disconnect outside rearview mirror wiring connector (C515-LH; C615-RH). Remove wiring guides as necessary.
  1. Remove three outside rear view mirror retaining nuts. Remove outside rear view mirror (17682) while guiding wiring and connector through hole in door.


an0786b.gif


Item Part Number Description 1 17682 Outside Rear View Mirror 2 N621906-S36 Nut (3 Req'd) 3 F8DB-17D699-
AAW Cover Assembly Rear Substrate-LH 3 F8DB-17D698-
AAW Cover Assembly Rear Substrate-RH 4 N808968 Screw 5 F8DB-18B984-
AAW Speaker Grille-Standard (No Badge)-LH 5 F8DB-18985-
AAW Speaker Grille-Standard (No Badge)-RH 5 F8DB-18K901-
BAW Speaker Grille-Mach-LH 5 F8DB-18978-
BAW Speaker Grille-Mach-RH 5 F8DB-238A35-
AAW Speaker Grille-Blank (No Speaker)-LH 5 F8DB-238A34-
AAW Speaker Grille-Blank (No Speaker)-RH A - Tighten to 6-8 Nm (54-70 lb-in) ------------------
Trim Panel, Door Front
Removal
  1. Remove cover behind inside door handle.
  1. Remove screw from bottom of pull cup retaining front door trim panel to front door (20124).
  1. Remove three screws retaining front door trim panel to front door.
  1. NOTE: Do not attempt to remove more than one pushpin at a time.

    Using Rotunda Windshield and Molding Trim Removal Kit 107-R0401 or equivalent, remove the door trim panel by pulling one door trim panel pushpin at a time from the inner door skin.
  1. Disconnect electrical connectors as necessary. Refer to Section 01-14A.
Installation
  1. Follow removal procedure in reverse order.
  1. Replace all pushpins with new pushpins (N808994-S).
Front Door Trim Panel


ar0318d.gif

Jan 14, 2011 | 1999 Ford Taurus

1 Answer

Remove and replace drivers door 1999 taurus?


Please don't forget to rate! Thank you!

Removal & Installation
c17hydro_32.gif

The door-to-body mounting



c17hydro_33.gif

Detach the door wiring from the connector


This is a two person operation.

  1. Remove the two door check-to-body retaining screws.

WARNING

Cover the end of the check strap to prevent possible paint damage.


  1. On the rear doors, remove the rear door trim panel, detach the electrical connectors from the components (if equipped) and remove the wiring harness from rear door.
  2. On the driver's side front door, disconnect the window regulator wiring, if so equipped, by removing the wire connector cover, loosening the screw and separating the connector halves.
  3. On the passenger side front door, remove the rubber harness protector from the body to reveal the electrical connectors. Detach the two electrical connectors.
  4. If the door is to be replaced, transfer the following components to the new door if in usable condition:
    • Door trim panel
    • Watershield
    • Outside mouldings
    • Trim clips
    • Window regulator
    • Door latch components.
  5. Remove the hinge retaining screws and nuts from the door and remove the door.

To install:

  1. Position the door onto the hinges and hand tighten the screws.
  2. Align the door and tighten the screws to 19-25 ft. lbs. (25-35 Nm).
  3. If removed, install the wiring harness to the rear doors.
  4. Attach the electrical connectors to the door panel.
  5. Install the door panel(s).
// // 0) preLoad.src = ctl00_cphLeft_chRepairTreeNav_tvTOC_ImageArray[i]; } ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.lastIndex = 31; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.populateLog = theForm.elements['ctl00_cphLeft_chRepairTreeNav_tvTOC_PopulateLog']; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.treeViewID = 'ctl00$cphLeft$chRepairTreeNav$tvTOC'; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.name = 'ctl00_cphLeft_chRepairTreeNav_tvTOC_Data'; //]]> var _strTreeScrollHidName = 'ctl00_hidTreeScrollPos';

Nov 20, 2010 | 1999 Ford Taurus

1 Answer

2003 ford taurus drivers window will not go up.


you either need a motor or motor and window regulator assembly.
SECTION 501-05: Interior Trim and Ornamentation 2002 Taurus/Sable Workshop Manual
REMOVAL AND INSTALLATION Front Door Trim Panel Removal and Installation
  1. Disconnect the battery ground cable. For additional information, refer to Section 414-01 .
  1. Remove the front door trim panel screws.
  1. NOTE: To release the door trim panel two part pin-type retainers, first pull outward on the bottom of the door trim panel.
    Remove the front door trim panel.
    • Disconnect the electrical connectors.
c64985a.gif --------------------------------------
SECTION 501-11: Glass, Frames and Mechanisms 2002 Taurus/Sable Workshop Manual
REMOVAL AND INSTALLATION Front Door Window Regulator And Motor
Special Tool(s) s2h~us~en~file=st1132a.gif~gen~ref.gif Heavy Duty Riveter
501-D011 (D80L-23200-A) or equivalent
Removal and Installation
  1. Remove the front door window glass. For additional information, refer to Front Door Window Glass in this section.
  1. Disconnect the front door window regulator motor electrical connector.
  1. Remove the window regulator rivets.
-----------------------------
SECTION 501-11: Glass, Frames and Mechanisms 2002 Taurus/Sable Workshop Manual
REMOVAL AND INSTALLATION Door Window Regulator Motor Removal and Installation
  1. Close the window.
  1. Disconnect the battery ground cable. For additional information, refer to Section 414-01 .
  1. Remove the door trim panel. For additional information, refer to Section 501-05 .
  1. If equipped, remove the radio speaker.
  1. Position the watershield aside.
  1. Disconnect the door window regulator motor electrical connector.
  1. Remove the bolts and the door window regulator motor.
---------------------------------------------------

May 04, 2009 | Ford V6 Pony Cars & Trucks

1 Answer

Replace a a/c unit on a 99 taurus


do you need somone to replace it for cheap

Apr 04, 2009 | 1999 Ford Taurus

1 Answer

Changing the starter on a 2003 Taurus


you need to remove it from the bottom front of car . disconnect the negative battery cable. remove the front splash shield from under front of car , working from under car take the protective cap off the wires that go to starter and then disconnect all wires from starter marking each one for propper reinstalation, remove the bolts holding starter and remove from under vehicle. replace in reverse order.

Nov 22, 2008 | 2003 Ford Taurus

Not finding what you are looking for?
1999 Ford Taurus Logo

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...