Question about 2002 Ford ZX2
How many 02 sensors
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Click on the link below, Enter the year,make,model, and engine. You will get a page with a link to the diagram you need under the part number.
Posted on Jun 17, 2009
Yes, All the years of the ZX2 utilize the same engine. 1998-2003 are all the same except for ECU programing and the MAF wiring. You should not have a problem.
Posted on Jul 31, 2009
not sure but you can go to autozone.com and sign up then put make,model and year of your car and it will show you a diagram..just look for diagram of your car motor..
Posted on Aug 11, 2009
On level ground, jack up the front of the car and support it with axle stands.
Get an open container that will take more than 5 ltrs.
Under the engine block you will find the sump.
On the sump you should find a 13mm nut, this is the drain plug.
Undo the drain plug and have the empty container directly below the sump plug.
Retain the sump plug and clean it with a rag.
When the oil has drained out of the sump, put back the plug making sure the washer is in good condition and the plug is tight.
Now unscrew the oil filter having the old oil container below the filter housing to catch any oil.
Wipe around the the filter housing to remove any and all old oil.
Now offer up the new oil filter but do not tighten.
If the new filter fits the oil filter housing, then remove it and lightly oil the rubber seal on the filter with clean oil.
Now refit the filter and tighten it up. Not too tight, you can do this by hand but get it as tight as you can.
Now lower the car to to the ground.
At the top of the engine you will find an oil filler cap. Undo this cap.
Now put in the new oil to just below the full mark on the dip stick. Let the oil drain through the engine to the sump for a couple of minutes before checking the oil level.
If the level is between 1/2 and full, replace the filler cap and start the engine.
Now look at the oil filter and the sump plug for any leaks. Also check around the oil filler cap for oil leaks and spillage.
With the engine turned off. Clean any oil spillages and tighten up the oil filter, sump and oil filler cap as required.
Now leave the oil to drain back to the sump for a few minutes.
Check the oil level and top up as required.
I find that it is best to top the oil up to just below the Max mark.
This should solve the problem.
Posted on Aug 28, 2009
Tips for a great answer:
Dec 21, 2015 | Ford Cars & Trucks
Below is the master help link provided to go through belt routing diagram:---Timing belt,drive belt,serpentine belt,accessory belt,fan belt,engine belt routing diagrams for all types of car models?
Click the link below :----http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help.Thanks.
Jan 31, 2012 | 2001 Ford Escort ZX2
Feb 09, 2011 | 2001 Ford Escort ZX2
Aug 01, 2010 | Ford ZX2 Cars & Trucks
Oct 25, 2009 | 2002 Ford ZX2
Oct 10, 2009 | 2001 Ford Escort ZX2
Apr 26, 2009 | 2001 Ford Escort ZX2
Apr 23, 2009 | 2003 Ford ZX2
Apr 07, 2009 | 2002 Ford ZX2
Sep 19, 2016 | 2002 Ford ZX2
95 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: