Question about Cars & Trucks

1 Answer

My 93 plymoth grand voyager se blinkers aren't

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 1,007 Answers

Possible faulty hazard light switch. The blinker circuit on many cars runs through the hazard light switch.

Posted on Nov 04, 2012

  • 3 more comments 
  • zach_tayl682
    zach_tayl682 Nov 04, 2012

    Would the hazards still work but blinkers not in this senerio

  • Jamie Alton
    Jamie Alton Nov 04, 2012

    They may. Different models may differ slightly in their hazard light circuits. Some models may have a single and others may have a double circuit.

  • zach_tayl682
    zach_tayl682 Nov 05, 2012

    ill check that thanks. The person I bought it from said he thought it had something to do with the air bags is that possible

  • Jamie Alton
    Jamie Alton Nov 05, 2012

    Well the airbag circuit wouldn't have anything to do with the blinker circuit at all. Would it be possible that they were referring to the indicator stalk? That would be the next thing I'd suggest checking after the hazard light switch.

  • zach_tayl682
    zach_tayl682 Nov 09, 2012

    Hazards not problem where would I find your other suggestion at on the van and thanks for help

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 979 Answers

SOURCE: wire diagram 1999 plymoth grand voyager

What section are you needing?

Posted on Jul 28, 2008

  • 337 Answers

SOURCE: 1999 plymouth grand voyager se removing dashboard

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528003c911

Posted on Dec 03, 2008

  • 52 Answers

SOURCE: 98 plymoth grand voyager cruise control

disconnect battery and wait 20 minutes for safety

you need to remove the air bag (3 bolts behind the steering wheel) then remove the steering wheel 1 nut but you need a puller. then the column shrouds 3 screws under the column the unplug and replace the clock spring and put it back together.

Posted on Apr 22, 2009

localwonder
  • 6784 Answers

SOURCE: blinkers and hazards not working on Jeep GC

HI. the flasher is faulty or damaged. replacing this device will fix your issue.

Posted on May 27, 2009

  • 44 Answers

SOURCE: hazards and blinkers not working

There are separate fuses for the turn signals and blinkers, but you should check both of them just to see if they're good.

You may have a burnt out turn signal bulb as well. I know that this sounds like an obvious answer, but a single bulb can sometimes disable the entire system because of the way that some flashers operate.

You could also have a defective turn signal/hazard light flasher. This is located under the dash board on the driver's side between the steering column and the door. You have to remove the sound insulation/kick panel (the cover on the bottom of the dash board) to reach the flasher (it is easy to remove - I don't think you even need tools).

Posted on Jul 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Signal lights only work intermittenly


The blinker relay is getting worn out. It's right behind the hazard lights switch. Pull off the black trim around the radio, hazard, ets, and the relay is write there. Next time the blinkers stop working hit the hazard button or hit the trim just above the hazard lights button. Mines been doing it off and on and I just hit the trim above the hazard button and they start blinking again. Never have time or remember to get a new relay.

Sep 07, 2014 | 2001 Pontiac Grand Am SE

1 Answer

98 plymoth grand voyager cruise control


disconnect battery and wait 20 minutes for safety

you need to remove the air bag (3 bolts behind the steering wheel) then remove the steering wheel 1 nut but you need a puller. then the column shrouds 3 screws under the column the unplug and replace the clock spring and put it back together.

Apr 21, 2009 | 2000 Chrysler Grand Voyager

3 Answers

Sounds like blinker lights is always on/2001 grand am se


You can clean the switch without having to replace it. I had the same problem and for about $10 worth of cleaner, grease, and cotton swabs I fixed it. Check this website for very detail cleaning instructions and pictures. You have to register as a user to get the pictures.

http://www.grandamgt.com/forum/showthread.php?t=50126&highlight=blinker+noise

Nov 14, 2008 | 2001 Pontiac Grand Am SE

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...