Question about 2000 Ford Escort
You got a problem, That will have to be delt with at a ford dealer ship. End no where allse,Unless you like to blow lots of (Money)
Posted on Nov 04, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Brake lights
I have a 98 and had the same problem just today, I found the problem by looking up where the pedal goes to and you will see two switches that the pedal hits when released, its the switch on the left side of the car, you will notice two (well one is prolly missing since the lights wont go off) blueish rubber pads on the brake pedal that hit the switches. since the one that goes to the switch to turn the lights off is gone go out and buy a small plastic body push screw to insert in the hole the old pad was in. there ya go all fixed
Posted on Oct 20, 2008
cam shaft timing marks on back of cams ,two slots ,use a flat piece of metal to align .remove no1 spark plug and drop long thin screwdriver down it to bring piston just below tdc,then align cams so both cams are on the rock (valves closed) with knob on back cam aligning with pick up sensor left side between lobes.then bring piston up to tdc and fit belt.turn engine over twice with socket on bottom pulley to make sure no valves clear pistons.Remember to remove flat edge from back of cams i didnt last time and bent my home made tool
Posted on Jan 28, 2009
Click on the link below, Enter the year,make,model, and engine. You will get a page with a link to the diagram you need under the part number.
Posted on Jun 17, 2009
Hello pamgolmon: My name is Roger and i will answer your question. The 2-0 dual cam engine is a interference engine. This means if the engine jumps time at the timing belt. It will bend the valves. As for the timing marks on the camshafts. Their are no marks to be located. To set the timing marks on this engine requires special tools. This makes it expensive for not only the do it yourself mechanic but also the repair shops also. If the valves were bent you must pull the head for the repairs also.
I know this is not the answer you were hoping for but it is the only answer to give. Please rate the quality of the answer as this way we know your answer was correct. Please just ask if you need further help. Thank You for using Fix Ya. Roger
Posted on Sep 09, 2009
SOURCE: belt routing diagram 98 zx2 2.0
1) Start with the alternator.
2) Forward to the smooth idler
3) Forward to power steering
4) Down to A/C compressor
5) Back to crank pulley
6) Forward around tensioner
7) Back glancing off of water pump
8) Back glancing off of ribbed idler
9) Up around alternator (where you started)
Posted on Sep 11, 2009
Tips for a great answer:
Jul 23, 2015 | Ford Escort Cars & Trucks
May 14, 2010 | 2000 Ford Escort
Apr 15, 2010 | 1998 Ford Escort
Dec 25, 2009 | 2000 Ford Escort
Dec 25, 2009 | 2000 Ford Explorer
May 04, 2009 | 2000 Ford Escort
Jan 07, 2009 | 1995 Ford Escort
Jul 22, 2008 | 1994 Ford Aerostar Extended
128 people viewed this question
Usually answered in minutes!