Question about 1997 Dodge Neon
What else should i check
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1995 DODGE RAM B1500 NO START
You need to use a LED type test light for the injectors or a Bosch style Noid light for the injector. To test the cam/crank sensor signal you either need a scanner to read them or a lab scope to show you a signal. The pickup plate in the dist handles the injector timing, the crank sensor provides a RPM signal. They both feed the computer information for ignition timing. Good fuel pressure, injector activity(Noid), and good spark out of the coil. The coil is what I replace the most of.
Posted on Nov 22, 2008
If you are asking about the battery light, there is a battery temperature sensor at the front of the battery tray to the right of the battery holddown hardware. If the snow loosened the wires or blocked the airflow to the sensor, the battery light will come on. The battery and alternator voltage can be correct, and the sensor will make the light come on.
Posted on Mar 14, 2009
YOU NEED TO CHECK DARK GREEN/ORANGE WIRE AT IGNITION COIL WHEN CRANKING ENGINE FOR POWER..IF NO POWER,SHUTDOWN RELAY IS NOT BEING ENERGIZED..THIS ENGINE ALSO HAS CAMSHAFT POSITION SENSOR ON END OF CYLINDER HEAD..ENGINE CONTROLLER NEEDS CAM AND CRANK SIGNALS TO ENERGIZE THE SHUTDOWN RELAY..UNPLUG CRANK SENSOR AND CHECK VOLTAGE ON ORANGE WIRE..SHOULD HAVE APPROX 8V..IF NOT..UNPLUG CAM SENSOR AND SEE IF 8V SUPPLY RETURNS..IF NO POWER TRY UNPLUGGING VEHICLE SPEED SENSOR LOCATED IN TRANS HOUSING WHERE RIGHT SIDE AXLE COMES OUT OF TRANS..IF 8V RETURNS..THE SPEED SENSOR IS SHORTED INTERNALLY..THESE 3 SENSORS SHARE THE SAME 8V SUPPLY CIRCUIT..WITH SPEED SENSOR UNPLUGGED,PLUG CRANK SENSOR BACK IN AND TRY TO START ENGINE..HAVE SEEN THIS SAME PROBLEM AT WORK RECENTLY
Posted on Jul 19, 2009
Tips for a great answer:
Jun 16, 2015 | Cars & Trucks
Mar 31, 2014 | 2002 Dodge Neon
Aug 15, 2013 | 2000 Chrysler 300M
Feb 19, 2013 | 2000 Dodge Neon
Dec 22, 2012 | 1998 Dodge Neon
Oct 15, 2012 | Dodge Neon Cars & Trucks
Sep 25, 2011 | Cars & Trucks
Mar 12, 2011 | 2003 Dodge Neon
Sep 10, 2010 | 1997 Dodge Neon
Jul 18, 2009 | 1997 Dodge Neon
76 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: