Question about Honda Cars & Trucks

1 Answer

The ignition stuck when the key was put in and difficult to operate

Honda CB 1300 SA7 Nov 2007 model: Going to start the bike from cold, placed the key in the ignition and would not operate, it was stuck in the Lock position. A bit of banging on the ignition and WD40 and managed to get the ignition to function and get it to start, same day [today] it did it 2 times more in the same manner and took some messing to get it to the On position. This has not happened before and had the bike for 4 1/2 of its 5 yrs and only done 3000 miles. Anybody any helpful ideas - otherwise in the gatage it goes - thanks

Posted by on

  • paul Nov 03, 2012

    This locking of the ignition, it also did it when in the 'off'position where the steering lock is not on?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Honda Master
  • 4,608 Answers

Use a graphite lock lubricant to fee it up better

Posted on May 08, 2017

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

keemo68
  • 1263 Answers

SOURCE: 2002 oldmobile bravada ignition key is stuck in lock position

try and turn your steering wheel a little bit left or right and and the same time try and turn the key when it turns toward the dash then try and turn the key back. try and repeat this several times if neccessary. this should work. please rate this solution. thanks

Posted on Aug 30, 2008

  • 1779 Answers

SOURCE: ignition key is stuck in the cylinder

Did u try turning the steering wheel slightly in either direction? The steering wheel can 'jam' causing the key to seem stuck in the ignition. Simply turning the steering wheel a bit relieves the pressure and the key will turn. Let me know if this works for u

Posted on Nov 29, 2008

  • 449 Answers

SOURCE: key stuck in ignition

change the key cyclinder thats where the problem is.

Posted on Dec 17, 2008

  • 22 Answers

SOURCE: Volvo S60 2003,Ignition lock cannot turn beyond position one

turn the key around and insert it ,when you turn it should work

Posted on May 03, 2009

  • 1 Answer

SOURCE: 1995 mercury sable GS 3.8L ignition problems?

How do you change an ignition cylinder on a 1995 Murcury Sabel ? .

Posted on Jun 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a trailer hooked up to my enclave the right turn signal blew out on trailor now my right turn signal on my truck dont work and my key wont come out of igntion


How to get your key out of the ignition if it gets stuck ...

? 1:21
https://www.youtube.com/watch?v=bctxs0Yj4Wc
Oct 24, 2012 - Uploaded by stanley saintlouis
How to get your key out of the ignition if it gets stuck! ... Chevy Impala Monte Carlo Buick Pontiac - Won't Shift ...

Key Stuck in the Ignition ' Here's What to Do

locksmith-orlando.org/key-stuck-ignition-heres/
Nov 3, 2014 - One of the most stressful moments as a driver is when your Key Stuck inthe Ignition and you are in a hurry. You can't simply leave your key in ...

Pontiac Grand Prix Questions - when I put my car in park it ...

www.cargurus.com > Questions > Pontiac > Grand Prix

CarGurusJul 28, 2013 - She put the actual key in the ignition and almost could pull it out. She called ... ignition stuck in an on position stering column locked 1 answer.

key stuck in ignition? ' Yahoo Answers

how do i fix my turn signal/blinker? - CarGuruswww.cargurus.com > Questions > Dodge > Ram 1500CarGurusMay 3, 2013 - My right rear turn signal is not working. ... Thanks for the input. just parked my truck for the night and realized the hazard light does not flash on ...Clearlake is the poorest place to live in California...we don't have pavement or ...GM Turn Signal Problem Fix - Directional Relay ... - YouTube? 5:38https://www.youtube.com/watch?v=y4QVUBVVVpIMay 3, 2014 - Uploaded by Steve O+Steve O I just change my turn signal switch it was workingthen it stop. ... store to see or can you help I'm having all those problem you said with my truck. .... leds all the ambers flash at the same time when I hit the left or right.


Jan 11, 2016 | Cars & Trucks

1 Answer

Key stuck in ignition in park. Check charging system comes on. Dealership says it might be a fuse.


Key Stuck in Ford Fusion (2006 model) - YouTube

? 1:21
https://www.youtube.com/watch?v=3LVQttFOzGA
Jun 18, 2014 - Uploaded by Jessica East
#Ford #Fusion #Key #ignition #Stuck #FordFusion2006. ... i have a 2006 mercury milan and my key got stuck in there last night,... it to park with a little bit of force. will see what happens next time. good video, nice to know.

Key Stuck in Ignition While in Park

www.2carpros.com/.../2007-ford-fusion-key-stuck-ignition-while-park
Dec 16, 2012 - KEY STUCK IN IGNITION / SHIFTER BINDING CONDITION FORD:2006-2007 Fusion LINCOLN: 2006 Zephyr MERCURY: 2006-2007 Milan

Nov 06, 2015 | 2006 Mercury Milan

1 Answer

How do i get my ignition to to turn if it is stuck?


Sometimes the steering wheel lock can bind up causing the key to be difficult to turn. Try turning the steering wheel one way and then the other while trying to turn the key. It sometimes works.

Sep 17, 2014 | 2000 Chevrolet Monte Carlo

1 Answer

My honda civic model 2007 1.8 exi automatic key is not switching on


Most likely the gear stick is not detecting the Park position. Try to shift the gear stick back and forth in the track and put it back in Park position. If this does not work then check if the steering lock is not stuck. Move the steering wheel left and right a few times and see if the ignition key moves. Otherwise a trip to the mechanic.

Aug 03, 2014 | Cars & Trucks

1 Answer

Buzzing and Ignition Issues


Sounds like a weak battery, or bad connections at the battery/etc. Could also be a security system issue. Without hearing the noise it is difficult to help you pinpoint it. Maybe compile some more info with specifics like when? how often? cold or hot engine? cold or hot outside? Does the engine crank slow/start normal when it does start? Do you have any non-Honda alarms/gps/tracking systems installed? If so, that's where to start. 99.9% of the time these types of probs show up with non-factory security systems installed, it's caused by the aftermarket product, or sloppy installation by vendor.

Mar 05, 2014 | 1997 Honda CR-V

1 Answer

How to reset the maintenece light on Honda accord 2007


1. Depress and hold the select/reset button on the right of the instrument panel beneath the odometer reading.
2.Insert the ignition key into the ignition to hold the select/reset button.
3.Turn the ignition key to the power accessory position. This will illuminate all the lights on the instrument panel without the engine running.
4.Continue the select/reset button until the maintenance required light goes out.On some year models. the light may blink once before going out.

Aug 14, 2013 | Honda Civic Coupe

1 Answer

My key won't go into ignition on my 2007 jetta


Try moving wheel back and forth while putting key in. Or if thats not it, take a screw driver flathead and try to turn ignition both ways just a bit. Sometimes those key cylinders dont go back into the open key position. Try that as you are moving the whhel as well. but my car does the same thing in the cold, and a screw driver seems to do it every time. Good luck let me know how you make out. PS Im guessing that ther is not something stuck inside ignition?? Good luck

Jan 08, 2013 | Cars & Trucks

1 Answer

Remote won't open the doors


put the key in the ignition and turn to on (not start) and hit unlock. then turn ignition to off position. do this 4 times the 4th time you turn the key and hit unlock you should hear the doors unlock. then with the ignition still on hit lock and everything should work. this sequence needs to be done quickly to work. - hope this helps

Dec 31, 2009 | 2007 Honda Accord Sedan

1 Answer

I lost my spare key for my 07 sport fit.How can I get a new spare key made as cheaply as possible? What about one with a remote?


sorry but you are resolved to having the key from the factory, there is chip in the handle part of the key for secuirty purposes that will not allow the ignition to operate, for this reason the hondas are now more difficult to steal... as we all know honda had real problem with being the easiest car for thieves to take...
please rate my help...

Aug 05, 2009 | 2007 Honda Fit Sport Hatchback

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...