Question about 1991 Honda Accord
Run a cooling system pressure test. If you are losing pressure, then you will have to first locate the source of your leak.
With the engine started and the radiator topped off with coolant, does the radiator spout water out of the top? Does the spouting become more aggressive with engine revs? Yes? = Blown head gasket, or cracked cylinder.
No?- check operation of radiator cooling fan. With car stationary and hood up, run engine up to temperature and make sure radiator cooling fan kicks in before the engine temperature rises too high.
Posted on Nov 04, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 95 honda civic lx overheating
COULD BE COOLANT SENSOR,HEAD GASKET,CHECK THE TIMING,THE PROPER MIXTURE OF COOLANT,WATER PUMP.DID YOU HAVE IT CHECKED OUT?ANY LEAKS?HEAT WORK WITH FAN?
Posted on Jan 08, 2009
First drain radiator by opening drain valve,"located on bottom corner usualy the right,but not always." If you open the overflow or remove cap this will happen much faster.For safety sake disconnect ground wire from battery,the radiator is locked down by top cover that attaches to body with generaly 4 bolts, upper and lower hoses have to be disconnected and if it is automatic the transmission cooling lines are connected in stacked fashion,"one above the other."The cooling fan has to be unplugged and it should be removable at this point,"when unplugging fan be carefull with connector so it doesn't break.reverse steps to replace making sure the bolts go in the right place and it all fits properly.the thermostat,"located behind the kneck of upper hose," should be replaced after connecting lower hose because in order to fill the block up and prevent damaging thermostat the block shoud be filled with coolant before attaching upper hose.
Posted on Apr 20, 2009
remove upper and lower hoses
remove 2 10 ml bolts on top lift rad out and insert new rad
if there is auto trans remember to undo the lines from the rad
allways replace ruber bushings if the fall our or are missing
Posted on Jan 03, 2010
Tips for a great answer:
Jul 05, 2011 | 1991 Honda Accord
Apr 12, 2011 | 1996 Honda Accord
Mar 29, 2010 | 1990 Honda Accord
Aug 02, 2009 | 1997 Honda Accord
Nov 16, 2008 | 1994 Honda Accord
137 people viewed this question
Usually answered in minutes!