Question about 2000 Ford F150 Flareside SuperCab

Open Question

How to remove a Ford F150 4.6L engine crankshaft pulley bolt

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 5 Answers

SOURCE: replacing water pump on 1996 ford escort

Take a ring spanner and put the ring side over the nut then use a hammer to tap the nut loose,if that does not work take a chisel and put it on the side of the nut and then tap with a hefty hammer until loose you will need to replace the nut afterwards thou

Posted on Aug 28, 2008

Ad
  • 5 Answers

SOURCE: how remove 1966 Ford Mustang 200 cu.in 6-cyl. crankshaft pulley

Hi,
You can remove that center bolt easily with an impact gun. It has normal threads on it. An impact gun will prove to be an affordable tool that you will use again. You can get an electric one from Harbor Freight. They make the job of removing tough bolts much easier. If the engine is in the car, you might not have enough room. You can use a ratchet and if the engine is turning, you can hold the pulley with another tool sold at Harbor Freight called a rubber strap wrench.

Posted on Dec 06, 2009

Testimonial: "Will report again when the job is done. Thanks for this info: 1) Center bolt is normal thread 2) Tools can be pruchased at Harbor Freight"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford Expedition 2001 crankshaft sensor location and installation


  • Located front of engine, close to crank pulley
  • press the helpful button and follow me on Fixya for more tips
  • Insert the square tip of a 1/2-inch socket wrench into the square hole in the center of the serpentine belt's adjustment pulley. The adjustment pulley is the smallest pulley the belt wraps around.
  • Pull the adjustment pulley toward the engine with the socket wrench to release the tension on the serpentine belt, then pull the belt off the air conditioning compressor's pulley.
  • Remove the bolts which secure the air conditioning compressor to its mounting brackets with an open-end wrench, then position the compressor to the side of the engine compartment. Do not disturb the hoses that attach to the compressor.
  • Pull the electrical connection off the crankshaft sensor.
  • Remove the two bolts that secure the crankshaft sensor against the engine with an open-end wrench, then slide the sensor out of the engine.
  • Slide the new crankshaft sensor into the engine, then install and tighten the sensor's two securing bolts with an open-end wrench.
  • Press the electrical connection onto the crankshaft sensor.
  • Position the air conditioning compressor against its mounting brackets, then install and tighten the compressor's bolts with an open-end wrench.
  • Pull the serpentine belt's adjustment pulley toward the engine with the socket wrench, then position the belt onto the air compressor's pulley. write up found @ehow

How to Replace the Crankshaft Sensor in Ford 150 eHow

Jan 28, 2016 | Ford Expedition Cars & Trucks

1 Answer

How do you remove the crankshaft dumper pully?


Published: 11-May-2011
Engine - V8 4.4L Petrol - Crankshaft Pulley
In-vehicle Repair
Special Tool(s)

Holding Tool Crankshaft Pulley
303-893(LRT-12-080)
Adapter
303-191-03
Bolts and spacers
303-191-04
Remover, crankshaft pulley
303-588
Remover, crankshaft seal
303-D121
Installer, crankshaft seal
303-1100
Adapter - Crankshaft seal installer
303-1100-01 Removal
  1. Disconnect the battery ground cable.
    For additional information, refer to: Specifications (414-00 Battery and Charging System - General Information, Specifications).
  1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands. Raise and support the vehicle.
  1. Remove the accessory drive belt.
    For additional information, refer to: Accessory Drive Belt (303-05B Accessory Drive - V8 4.4L Petrol, Removal and Installation).

  1. Remove the cooling fan shroud.
    • Release 2 clips from the cooling fan lower shroud.
    • Release and remove the cooling fan lower shroud from the cooling pack.

  1. Using the special tools, retain the crankshaft pulley.
  1. CAUTION: Under no circumstances should the crankshaft setting peg, 303-645, be used in the following operations, to restrain the crankshaft. NOTE: The crankshaft pulley retaining bolt will be very tight.
    Remove the crankshaft pulley retaining bolt.
    • Discard the bolt.
  1. Remove the special tools.

  1. Using the special tools, remove the crankshaft pulley.
    • Collect the locking ring.
  1. Remove the special tools from the crankshaft pulley.

  1. Using the special tool, remove the crankshaft front seal.
    • Remove the outer section of the seal.
    • Repeat the process to remove the inner section of seal.
  1. Check the crankshaft damper pulley and locking ring for damage.
Installation
  1. Clean all the crankshaft pulley mating faces.

  1. Using the special tools, install the crankshaft front seal.
    • Lubricate the seal with clean engine oil.
    • Use the discarded crankshaft bolt with the service tool.
  1. Install the crankshaft pulley.
    • Lubricate the seal with clean engine oil.
  1. Install the crankshaft pulley locking ring.
  1. CAUTION: The screw thread in the crankshaft pulley must be cleaned out before installing a new crankshaft pulley bolt. Install, but do not tighten, the new crankshaft pulley bolt.
  1. CAUTION: Under no circumstances should the crankshaft setting peg, 303-645, be used in the following operations, to restrain the crankshaft. Using the special tools, retain the crankshaft pulley.
    • Tighten the crankshaft pulley bolt to 380 Nm (280 lb.ft).
  1. Remove the special tools.
  1. Install the cooling fan lower shroud.
  1. Install the accessory drive belt.
    For additional information, refer to: Accessory Drive Belt (303-05B Accessory Drive - V8 4.4L Petrol, Removal and Installation).
  1. Connect the battery ground cable.
    For additional information, refer to: Specifications (414-00 Battery and Charging System - General Information, Specifications).

Jan 27, 2016 | 2006 Land Rover Range Rover Sport

1 Answer

Position of cam shaft censor in the ford f150


nstructions
    • 1

      Insert the square tip of a 1/2-inch socket wrench into the square hole in the center of the serpentine belt's adjustment pulley. The adjustment pulley is the smallest pulley the belt wraps around.

    • 2

      Pull the adjustment pulley toward the engine with the socket wrench to release the tension on the serpentine belt, then pull the belt off the air conditioningicon1.png compressor's pulley.

    • 3

      Remove the bolts which secure the air conditioning compressor to its mounting brackets with an open-end wrench, then position the compressor to the side of the engine compartment. Do not disturb the hoses that attach to the compressor.

    • 4

      Pull the electrical connection off the crankshaft sensor.

    • 5

      Remove the two bolts that secure the crankshaft sensor against the engine with an open-end wrench, then slide the sensor out of the engine.

    • 6

      Slide the new crankshaft sensor into the engine, then install and tighten the sensor's two securing bolts with an open-end wrench.

    • 7

      Press the electrical connection onto the crankshaft sensor.

    • 8

      Position the air conditioning compressor against its mounting brackets, then install and tighten the compressor's bolts with an open-end wrench.

    • 9

      Pull the serpentine belt's adjustment pulley toward the engine with the socket wrench, then position the belt onto the air compressor's pulley.



Read more: How to Replace the Crankshaft Sensor in a Ford F-150 ' eHow.com http://www.ehow.com/how_6769823_replace-crankshaft-sensor-ford-f_150.html#ixzz2Ebai9Ftj

Dec 09, 2012 | 1998 Ford F150 Regular Cab

1 Answer

Locating tdc on ford ranger 2001 2.5 4cyl


Here are the instructions to replace the belt which are ones the same as the 2.3 earlier engine.
Getting Started
  • Remove the radiator shroud and loosen the water pump pulley bolts. Remove the accessory drive belts. Remove the water pump pulley bolts. Remove the water pump pulley and the radiator cooling fan. Drain and recover the Freon from the air-conditioning system. Remove the air-conditioning compressor.
    Remove the power steering pump but leave the lines attached and move aside. Remove the air conditioning bracket. Remove the crankshaft pulley bolt and the pulley using the wheel puller. Remove the timing belt cover.
Align Crankshaft and Block
  • Turn the crankshaft clockwise until the keyway on the crankshaft sprocket is straight up and the dot to the right side of it is lined up with the corresponding mark on the block. Check that the triangle mark on the camshaft sprocket lines up with the same type mark on the block at the 5 o'clock position. If not then turn the crankshaft one more time and it will align.
Loosen Tensioner
  • Loosen the large bolt on the top of the tensioner and then loosen the bolt closest to the tensioner pulley. Use the special ford tool and turn the tensioner clockwise to take the tension off of the timing belt and tighten the adjusting bolt lightly to hold it out of your way. Remove the timing belt.
Work Counterclockwise
  • Install the new timing belt starting on the right side and work counterclockwise. The circle on the crankshaft sprocket and the diamond marks on the oil pump and the triangle marks on the camshaft sprocket should always stay lined up. Loosen the adjuster bolt on the tensioner and rotate the engine two turns clockwise and realign the timing marks. Tighten the tensioner-adjusting bolt next to the tensioner pulley and then pivot bolt. Install the rest of the components in the reverse order that they were removed and tighten the crankshaft bolt to 121 foot-pounds of torque.

Jun 01, 2012 | Cars & Trucks

1 Answer

How to chg alternator on 2002 ford taurus 24v dohc 3.0


ctionsThings You'll Need
  • Flywheel holding tool
  • New alternator
  • Socket wrench set
  • Torque wrench
    • 1Determine which alternator your Ford Taurus will need. You'll want to be sure the new alternator is compatible with your Taurus's engine. Models made from 1986 to 1991 have a 2.5 L HSC, 3.0 L Vulcan or 3.8 L engine. The 2.5 L engine was dropped for 1992 to 1995 models, and post-1995 models will have a 3.0 L engine.
    • 2Disconnect the negative battery cable with a socket wrench. Release the tension on the accessory drive belt so that you can remove the drive belt from the pulley.
    • 3Take off the mounting bolt on the right side of the alternator with a socket wrench and remove the bracket for the power steering hose. Remove the mounting bolts on top of the alternator, the front passenger wheel and tire assembly and the front fender splash shield. Remove the alternator splash shield with a socket wrench and take off the inspection cover for the torque converter.
    • 4Mount a tool to hold the flywheel so you can remove the crankshaft pulley bolt and crankshaft pulley. Lower the alternator so you can unplug its electrical connections. Disconnect the crankshaft position sensor and Oxygen sensor connector. Remove the lower alternator mounting bolt and B+ connector nut to remove the alternator.
    • 5Install the new alternator assembly by reversing the above procedure. Use a torque wrench to tighten the B+ connector nut to 71 in. lbs. and the lower alternator bolt to 18 foot pounds. Torque the crankshaft pulley bolt to 74. foot pounds, the upper alternator bolts to 18 foot pounds and the nut for the power steering hose bracket to 13 foot pounds.


Read more: How to Replace the Alternator in a Ford Taurus ' eHow.com http://www.ehow.com/how_4506222_replace-alternator-ford-taurus.html#ixzz1ZdgFklse

Oct 01, 2011 | 2002 Ford Taurus

1 Answer

Procedure in changing timing belt


Timing Belt and Sprockets REMOVAL & INSTALLATION 2S-ELC, 3S-FE and 5S-FE Engines
  1. Remove the timing belt covers as previously detailed.
  2. Raise the engine just enough to remove the weight from the engine mount on the right side.
  3. Remove the thru-bolt, two nuts, and right hand mounting insulator.
  4. Remove the retaining bolts and remove the right hand mounting bracket (from the side the alternator was removed from).
  5. Remove the timing belt and timing belt guide. If the timing belt is to be reused, draw a directional arrow on the timing belt in the direction of engine rotation (clockwise) and place matchmarks on the timing belt and crankshaft gear.
  6. Remove the bolt retaining the No. 1 idler pulley and tension spring.
  7. Remove the No. 2 idler pulley.
  8. Remove the crankshaft timing gear , if it can not be removed by hand, use two flat bladed tools to pry it off. Make sure to position shop rags to prevent damages to the components.
  9. Remove the nut retaining the oil pump pulley. To install:
  10. Align the cutouts of the oil pump pulley and shaft, and slide the pulley on. Retain the pulley while tightening the nut to 21 ft. lbs. (28 Nm).
  11. Align the crankshaft timing pulley set key with the key groove of the crankshaft pulley, then slide the pulley on.
  12. Install the No. 2 idler pulley with the bolt and tighten to 31 ft. lbs. (42 Nm). Be sure the pulley moves smoothly. NOTE: Remove any oil or water on the idler pulley and keep it clean.
  13. Temporarily install the No. 1 idler pulley with the retaining bolt. Hint: use a 1.65 inch (42mm) bolt in length. Do not tighten the bolt yet. Install the tension spring. Pry the pulley toward the left as far as it will go, then tighten the bolt.
  14. Turn the crankshaft until the key groove in the crankshaft timing pulley is facing upward. Install the timing belt on the crankshaft timing, oil pump, No. 2 idler and water pump pulleys. NOTE: If the old timing belt is being reinstalled, make sure the directional arrow is facing in the original direction and that the belt and crankshaft gear matchmarks are properly aligned.
  15. Install the lower (No. 1) timing belt cover and new gasket with the four bolts.
  16. Align the crankshaft pulley set key with the pulley key groove. Install the pulley. Tighten the pulley bolt to 80 ft. lbs. (108 Nm).
  17. On 2S-ELC engines, turn the crankshaft pulley and align the 0 mark on the lower (No. 1) timing belt cover.
  18. Align the camshaft knock pin with the matchmarks on the oil seal retainer.
  19. On 2S-ELC/USA engines, align the knock pin with the pin hole on the timing pulley E mark side. On 2S-ELC/Canadian engines, align the knock pin with the pin hole on the timing pulley. On 3S-FE and 5S-FE engines, align the knock pin with the groove of the pulley, and slide the pulley onto the camshaft with the plate washer and set bolt. NOTE: On 2S-ELC engines, make sure that the Matchmark on the oil seal retainer and center hole of the small hole on the camshaft timing pulley are aligned.
  20. Using the removal tool to hold the pulley stationary, install and tighten the pulley set bolt to 40 ft. lbs. (54 Nm) on the 2S-ELC and the 3S-FE. On the 5S-FE, tighten the set bolt to 27 ft. lbs. (37 Nm).
  21. On 3S-FE and 5S-FE engines, turn the crankshaft pulley and align the 0 mark on the lower (No. 1) timing belt cover.
  22. Install the timing belt and check the valve timing as follows:
    1. Align the matchmarks that you made previously, and install the timing belt onto the camshaft pulley.
    2. Loosen the No. 1 idler pulley set bolt 1⁄2 turn.
    3. Turn the crankshaft pulley two complete revolutions TDC to TDC. ALWAYS turn the crankshaft CLOCKWISE. Check that the pulleys are still in alignment with the timing marks.
    4. Tighten the No. 1 idler pulley set bolt to 31 ft. lbs. (42 Nm).
    5. Make sure there is belt tension between the crankshaft and camshaft timing pulleys.
  23. Install the upper (No. 2) timing cover with a new gasket(s). On the 5S-FE, align the two clamps for the engine wiring harness with the cover mounting bolts.
  24. Install the spark plugs.
  25. The remainder of installation is the reverse of removal. Tighten each component to specifications.

Aug 04, 2010 | 1996 Toyota Camry

1 Answer

How remove 1966 Ford Mustang 200 cu.in 6-cyl. crankshaft pulley


Hi,
You can remove that center bolt easily with an impact gun. It has normal threads on it. An impact gun will prove to be an affordable tool that you will use again. You can get an electric one from Harbor Freight. They make the job of removing tough bolts much easier. If the engine is in the car, you might not have enough room. You can use a ratchet and if the engine is turning, you can hold the pulley with another tool sold at Harbor Freight called a rubber strap wrench.

Dec 06, 2009 | 1966 Ford Mustang

1 Answer

Where is the alternator located on a 2006 Ford Taurus?


Hi,

If yours is the 3.0L (2 valve) engine, then location will be obvious - next to the degas bottle on the engine.

However....if it's the 3.0L (4 valve) engine, then:
  1. Disconnect the battery ground cable.
  2. Remove the accessory drive belt.
  3. Remove the power steering hose bracket nut from the alternator mounting bolt.
  4. Remove the upper alternator mounting bolts. NOTE: The left side bolt will come out with the alternator.
  5. Raise and safely support the vehicle.
  6. Remove the right front wheel.
  7. Remove the right inner fender splash shield.
  8. Remove the screws and the alternator splash shield
  9. Remove the torque converter inspection cover.
  10. Install the flywheel holding tool.
  11. Remove the bolt and the crankshaft pulley. NOTE: The crankshaft pulley bolt has a reverse thread. The crankshaft pulley and bolt are a molded composite and are one piece.
  12. Lower the alternator to allow access to the electrical connectors.
  13. Disconnect the crankshaft sensor.
  14. Release the oxygen sensor connector locator from the bracket.
  15. Remove the lower alternator bolt.
  16. Disconnect the regulator electrical connector.
  17. Disconnect the remaining wiring from the alternator and remove the alternator
I know....what a pain !


Cheers,

Scott

Nov 12, 2009 | 2006 Ford Taurus

1 Answer

Need instructions on how to remove an alternator on a 2002 Ford Taurus.


It's a little different if you have a 3.0L (2v) or a 3.0L (4v) engine. I will give you directions for a 2v first. 1. disconnect neg side of battery2. remove accessory drive belt.3.remove the fasteners and move the degas bottle aside.4. disconnect the wiring from the alternator .5.remove the brace and and alternator mounting bolt. 6.remove the alternator from the engine. -------------------4v engine- 1.disconnect neg side of battery 2.remove accessory drive belt.3.remove power steering hose bracket nut from the alternator mounting bolt.4. remove the upper alternator mounting bolts Note: the left side bolt will come out with the alternator5. raise the vehicle and safely support it with jack stands. 6. remove the right front wheel 7.remove the right inner fender splash shield. 8. remove the screws and alternator splash shield.9remove the torque converter inspection cover.10.install the flywheel holding tool. 11.remove the bolt and crankshaft pulley. Note the bolt has reverse threads for the crankshaft pulley and the pulley and bolt are one piece molded together. 12. lower the alternator to gain access to the electrical connections 13. disconnect the crankshaft sensor14.release the oxygen sensor connector locator from the bracket 15. remove the lower alternator bolt16.disconnect the regulator electrical connector 17.disconnect remaining wiring from the alternator and remove the alternator.

Jun 28, 2009 | 2002 Ford Taurus

1 Answer

Needing schematics for timing belt on a 2000 se


Removal & Installation

2.0L Engine
  1. Remove or disconnect the following:

    Negative battery cable Spark plugs Catalytic converter Right front wheel Right inner splash shield Accessory drive belt and idler pulley
  2. Rotate the crankshaft to Top Dead Center (TDC) and install Crankshaft TDC Timing Peg T97P-6000-A.
  3. Rotate the crankshaft clockwise against the peg.
  4. Remove or disconnect the following:

    Water pump pulley Valve cover Crankshaft pulley Timing belt covers
  5. Install Camshaft Alignment Timing Tool T94P-6256-CH into theslots of both camshafts at the rear of the cylinder head to lock thecamshafts into position.
  6. Loosen the timing belt tensioner bolt and relieve the tension onthe timing belt by disconnecting the tensioner tab from the timingcover back plate.
  7. Remove the timing belt.

    0900c152801e2a75.jpg enlarge_icon.gifenlarge_tooltip.gifFig. Crankshaft alignment position-Ford 2.0L (VIN 3) engines


    0900c152801e2a76.jpg enlarge_icon.gifenlarge_tooltip.gifFig. Placement of Camshaft Alignment Timing Tool T94P-6256-CH-Ford 2.0L (VIN 3) engines


    0900c152801e2a77.jpg enlarge_icon.gifenlarge_tooltip.gifFig. Timing belt tensioner index marks-Ford 2.0L (VIN 3) engines

To install:

NOTE Always replace the timing belt after loosening or removing it.
  1. Install the timing belt.
  2. Engage the timing belt tensioner tab into the timing cover back plate.
  3. Adjust the timing belt tensioner until the index marks are aligned. Tighten the tensioner bolt to 17-20 ft. lbs. (22-28 Nm).
  4. Remove the camshaft alignment tool and the crankshaft TDC peg.
  5. Install or connect the following:

    Timing belt covers Crankshaft pulley. Tighten the bolt to 81-89 ft. lbs. (110-120 Nm). Valve cover Water pump pulley Accessory drive belt and idler pulley Right inner splash shield Right front wheel Catalytic converter Spark plugs Negative battery cable
  6. Start the engine and check for proper operation.

Apr 08, 2009 | 2000 Ford Contour

Not finding what you are looking for?
2000 Ford F150 Flareside SuperCab Logo

Related Topics:

358 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...