Question about 1992 Geo Storm

1 Answer

1992 geo storm 1.6 timing marks

Timing marks

Posted by on

  • RobertHamlin Jan 10, 2009

    i have a 92 geo storm ,it got way to cold and the timing belt broke when i tried to start it . dont know if i have to replace the head or not

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 740 Answers

This is a pretty simple one here is a diagram. Good Luck and contact if you need more help. Thanks for using FIX YA http://www.2carpros.com/car_repair_information/tec_info/1992/geo/storm/1992_geo_storm_timing_belt_diagram_marks.htm

Posted on Jan 04, 2009

6 Suggested Answers

  • 119 Answers

SOURCE: How to set a timing belt for a 1992 GEO Storm

Here you are:

137fd9e.png

Posted on Jun 01, 2008

vatticus
  • 20 Answers

SOURCE: timing a 1992 geo prizm

there should be a mark on the lower pulley (aka crank) there should be a place to keep the light pointed at . if you cant find it . my have to buy a manuel. 20 bucks at auto store.

Posted on Jan 21, 2009

  • 9 Answers

SOURCE: 1992 Geo Storm transmission

undo the struts, remover cv joints from the tranny, disconnect the transmission linkages and drop tranny out the bottom of the car

Posted on Mar 18, 2009

  • 10 Answers

SOURCE: how to set the timeing on 91 geo storm

The timing marks are located near the top of the crankshaft pulley on the plastic timing belt cover. There is a notch in the pulley to mark TDC (Top Dead Center)
Align the notch with the 0 mark on the plastic cover to set your base timing.
Ground the proper circuit on the ALDL connecter located under the dashboard somewhere under the steering wheel. Check the manual for the proper circuit to ground.
With the engine warm and the circuit grounded. Set the proper timing. Un-ground the circuit and you are done.

Posted on May 12, 2009

  • 1 Answer

SOURCE: 1992 Geo tracker

why does my tracker only go 25 and when is stop it dies

Posted on Nov 18, 2009

  • 1 Answer

SOURCE: firing order diagram 1992 geo storm SOHC 1.6L

1,3,4,2 is the fireing order. I got the answer from the haynes manual for the car.

Posted on Jan 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does 1992 geo storm gsi have timing belt or timing chain


great question. but confuses <STORM (an ISUZU) with METRO, Swift.
ill assume the STORM is correct and the 1.8l too.
that engine is a ISUZU Real engine,
and is called the
4XF1 ,see facts below.
now the cam answer.

in the uSA this car is the GSI model with 1.8L
see last link for your answer. below. GM official page.
you can also see your cam in the 2nd link below.
the engine is INTERFERENCE. so if the belt snaps, it bends valves
just like all HONDAs do.\
http://www.agcoauto.com/content/List_Of_Interference_Engines


wiki facts.
The larger 1.8 L 4XF1 DOHC replaced the 4XE1 in North America and produces 140 hp (104 kW) and 125 ft/lb (169 Nm) of torque. This engine was used in the 1992-1993 Geo Storm GSi, in the 1992 Isuzu Stylus RS, and in the Asuna Sunfire. In Japan it was installed in the Isuzu Piazza, where it had 150 PS (110 kW).

http://www.gmpartsdepartment.com/parts/1992/Geo/Storm/2Plus2%20GSi?siteid=214533&vehicleid=73792&diagram=F200040&diagramCallOut=13


rockauto shows the belt. see it?

http://www.rockauto.com/catalog/x,carcode,1177017,parttype,5759,a,www.google.com%2BSearch%2Bfor%2B1992%2BISUZU%2BSTYLUS%2B1.8L%2BL4%2BEngine%2BCrankshaft%2BSeal

May 10, 2014 | 1992 Geo Storm

1 Answer

Ichanged the head on my 91 geo storm 1.6 dohc and now it won't start


Double check crankshaft timing mark, on your lower timing cover has some timing marks - crankshaft should be on the 0 mark. Camshaft timing marks--intake camshaft mark set at 3 o'clock and exhaust camshaft mark set a 9 o'clock. These timing marks are critical for motor to run and start correctly. These timings marks can move while trying to install the timing belt. After, you confirm or reset timing and belt, you can confirm timing is correct by rotating the crankshaft twice. Your timing marks should be on right on timing marks discussed at the top of the page. If timing marks are off, start over with timing process.

Jul 11, 2012 | 1990 Geo Storm

1 Answer

How do you set the timing on a 1992 GEO storm 1.6 DOHC twin cam overhead?


I'm pretty sure they only had 1.8 twin cams in the 92-92 Storm

Nov 23, 2010 | 1992 Geo Storm

1 Answer

I need the diagram for a timing belt on a 1992 geo storm


The timing belt will only run between the crank and the cam(s). Usually has a tensioner on one side. You'll need to know where to set the cam(s) and crank to reinstall it.

Or do you mean the accessory belt?

Sep 12, 2010 | 1992 Geo Storm

1 Answer

Firing order diagram 1992 geo storm SOHC 1.6L


1,3,4,2 is the fireing order. I got the answer from the haynes manual for the car.

Jan 04, 2010 | 1992 Geo Storm

1 Answer

1 Solution for ''1992 Geo Storm starts when cold dies while idling or driving let it sit for an hour and starts


try replacing the ignition modual inside the distributer cap. its easy to change out, just follow instructions that come with it. cost is about $40

Mar 04, 2009 | 1992 Geo Storm

1 Answer

How to set the timeing on 91 geo storm


The timing marks are located near the top of the crankshaft pulley on the plastic timing belt cover. There is a notch in the pulley to mark TDC (Top Dead Center)
Align the notch with the 0 mark on the plastic cover to set your base timing.
Ground the proper circuit on the ALDL connecter located under the dashboard somewhere under the steering wheel. Check the manual for the proper circuit to ground.
With the engine warm and the circuit grounded. Set the proper timing. Un-ground the circuit and you are done.

Dec 13, 2008 | 1991 Geo Storm

1 Answer

1992 Geo Storm transmission


undo the struts, remover cv joints from the tranny, disconnect the transmission linkages and drop tranny out the bottom of the car

Dec 12, 2008 | 1992 Geo Storm

1 Answer

1992 Geo Storm


unfortunately there are many things that can cause this and unless you are a relatively inclined mechanic it is hard to figure out the exact problem but ut could be your relay or your distributor

Sep 09, 2008 | 1992 Geo Storm

Not finding what you are looking for?
1992 Geo Storm Logo

Related Topics:

750 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...