Question about Cars & Trucks

Open Question

Airwick Freshmatic squirts once after putting batteries and turning it on but won't squirt again.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 15 Answers

SOURCE: my s10 will turn over, but wont squirt gas through injecter

Does it crank? Do you have any codes? Check engine light? Do you have spark? No spark check coil, and connections, also it would be nice to know what year it is. Get codes read. No crank check battery and starter. No codes or lights check crank position sensor, make sure your pcm is good after replacing your ignition mod you could have blown it if you did do it right. (engine computer) Check cam sensor if applies. Crank and cam could prevent it from starting and I know one I think cam controls pcm's fuel delivery on gm's

Posted on Dec 30, 2008

MNfisherman
  • 11896 Answers

SOURCE: windshield wiper fluid will not squirt - wipers are fine but no fluid comes through

Either the pump is bad, or the nozzles are clogged.

Posted on May 19, 2009

  • 58 Answers

SOURCE: Windshield wiper fluid won't squirt

When you pull the lever to activate the windshield washers, do you hear any type of sound coming from under the hood?  A whirring sound should be heard from the little electric pump that feds the washers.
If you can hear the whir, then you should look for a possible clog in the washer hoses (there is more than one...).
If you cannot hear the whirr, then you should check the fuse that protects the windshield washer circuit.  Check your owner's manual for the location and correct amperage for this circuit.
Good luck!

Posted on Jun 16, 2009

bunnydawg
  • 5158 Answers

SOURCE: my windshield wipers work but I cant squirt windshield cleaner

it's likely the tiny motor/pump located at the bottom of the tank that has failed. to confirm this have some turn on the washer fluid switch and test for voltage at the pump. there are several aftermarket pumps you can use as a replacement.

Posted on Sep 02, 2009

  • 2468 Answers

SOURCE: windshield wiper fluid does not squirt out

go to a service station with an air compressor and with the air turned down to about 20 lbs blow into the washer top small hole to force fluid thru the hoses,not a lot of pressure so you blow hoses off or rupture something

Posted on May 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 19.2 craftsman 1/2" impact and it quits all the time when it quits if you move it back and forth it will start again, about a half dozen raps. Can you tell me how to fix, please


Turn it upside down squirt a lot of 3 in 1 oil into the air Jack put back into air hose leaving it upside down press your trigger oil will probably squirt out everywhere this is fine you may need to do this 2 or 3 times if you still have problems try WD-40, just make sure you flush with three and one oil after the WD-40

Jun 25, 2016 | Cars & Trucks

1 Answer

1992 4.3 v6 tbi s10 starting problem. Won't squirt


Are the injectors getting power and a ground signal from the computer ?

Sep 06, 2013 | Cars & Trucks

1 Answer

My 1999 Kia Sportage won't start. I put a new fuel pump in replaced the car battery . Need help please...


Im dealing with a similar situation. But have found that I have no spark. By opening the end of the air intake and giving a little squirt of starter fluid and no start. Opened access to FP and pulled a hose. No fuel. So no fuel no spark. reading lots and lots of forums I have come to the conclusion it is either the Cam or the Crank sensor. The crank sensor is easier to get to and cheaper. I am going to check that first.

Apr 06, 2013 | 1999 Kia Sportage

1 Answer

94 gmc sierra 4.3 v6 manual, won't turn over, can hear fuel pump start when accessories turned on..won't fire, girl who needs help


The first thing I would check is fuel pressure. This type of fuel injection requires a minimum fuel pressure in order to operate. If fuel pressure is as little as one psi below minimum the vehicle will not start. You can try squirting a couple of shots of carb spray into the air snorkel while somebody cranks the engine over. If the engine starts and then dies you now you fpdeffinetely have a fuel issue. If the engine still won't start check for spark. Let me know what you find. Let me know if you have any questions and I'll do my best to answer them. Thank you for using FixYa.com!

Feb 07, 2012 | GMC Sierra Cars & Trucks

1 Answer

94 lexus sc300, Been sitting for 3years. was running fine when parked. Recently need to use car again. I changed out the old fuel with new fuel. replaced battery. Car turns over but wont start. I am...


CHANGE FUEL FILTER.SQUIRT FEW DROPS OF OIL IN EACH CYLINDER REMOVE SPARK PLUGS SQUIRT A LITTLE ENGINE OIL DOWN IN THE CYLINDERS TO SEAL THE COMPRESSION RINGS BUILD UP COMPRESSION SO ENGINE WILL START.

Oct 24, 2011 | 1992 Lexus Sc 300

1 Answer

Stalled on road, turns over but won't start.


you will need two people to test to see if you have a bad fuel pump. you will need a can of aerosol throttle body cleaner. open up the air filter casing and and make sure u do not squit any fluid on the MAF air flow sensor the bottle of cleaner sometimes has a red straw for further reach use this straw. the other person has to crank the engine and once the enine begins to turn over start squirting the fluid into the engine via the air filter tube. have plenty of trigger control becuse too much fluid might cause a back fire (so you might want to wear a clean glove) and too little fluid wont start the engine. if you get the enine to run for a brief second while squirting the chemical chances are that the fule pump is bad or the fuel filter is clogged. hope this helps

Aug 26, 2011 | 1994 Isuzu Rodeo

1 Answer

4.3 vortec on my s10 won't start. squirted starting fluid and it started, ran but sluggish. shut it off for 30 minutes not starting again


More than likely you have a fuel pump gone bad. Fuel pressure on the Vortec needs to be at 60 psi. Check your fuel pressure, and if lower than 60, replace the fuel pump.

Aug 19, 2011 | Chevrolet S 10 Cars & Trucks

3 Answers

Mazda RX8 won't start, Engine will crank but won't start.


you have flooded the engine if you go too you fuse box and take out the fuel pump fuse turn the engine over for a while this gets rid of the fuel left in the cups in the engine replace the fuse try it again it will start

Jan 31, 2010 | 2004 Mazda RX-8

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...