Question about Cars & Trucks

Open Question

How to replace ford escape serpentine belt - Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: serpentine belt replacement

2.0L Engines
See Figures 11, 12 and 13
The accessory drive belt for 2.0L engines has no provision for manual belt adjustment, since these engines use an automatic belt tensioner. Drive belt slack is taken up by the automatic tensioner.
Movement of the automatic tensioner assembly during engine operation is not a sign of a malfunctioning tensioner. This movement is the tensioner self-adjusting and is required to maintain constant belt tension.
The belt tensioner has a belt length indicator. If the indicator marks are not between the MIN and MAX marks, the belt must be replaced.
0900c1528008d836.jpgFig. 11: Drive belt routing-2.0L SOHC engine with A/C 0900c1528008d837.jpgFig. 12: Drive belt routing-2.0L SOHC engine without A/C 0900c1528008d838.jpgFig. 13: Drive belt routing-2.0L DOHC engine

Posted on Oct 02, 2008

  • 4 Answers

SOURCE: How do you change serpentine belt on a 2003 ford

Rotate the accessory drive belt tensioner (5)clockwise and remove the accessory drive belt.
207b6b6.gif

Posted on Mar 05, 2009

blueextc3221
  • 15935 Answers

SOURCE: need diagram of serpentine belt for 94Solution for "need diagram for replacing serpentine belt for 94 ford taurus gl w/3 0 v6 engine and a/c" ford taurus gl w/3.0 v6 engine and a/c

89beac5.gif Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

Posted on May 21, 2009

rtpflh
  • 546 Answers

SOURCE: replace a serpentine belt on a 97 ford taurus

use a 15mm box wrench on the nut retaining the tensioner pulley to pry the tensioner 'arm' against the spring to release belt. note belt routing on decal under hood,or make a sketch,to aid in replacement.
on OHV engine rotate clockwise
on OHC rotate counter clockwise
be sure belt is completely seated on pulleys

Posted on Oct 15, 2009

  • 2 Answers

SOURCE: please show diagram for replacing serpentine belt

How do you bypass the serpentine belt from the a/c compressor the reg belt is 85in

Posted on Dec 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change serpentine belt on a 2006 ford escape 4 cylinder engine


locate the tensioner and when you have new belt , remove the old one and replace it with the new one you may have to loosen a motor mount and lift the left side of motor to get it in place.

Aug 18, 2015 | 2006 Ford Escape

1 Answer

2004 ford escape belt assembly


Most of the Fords I've owned including my 3 Escapes, have a diagram for the serpentine belt under the hood of the vehicle. Typically located on the frame above the radiator.

Jun 16, 2014 | 2004 Ford Escape

1 Answer

I need a serpentine belt diagram for a 2008 ford escape 3.0 v6


It is not that hard just remember to put the belt on where every pulley turns in the same direction .

Feb 18, 2014 | 2008 Ford Escape

1 Answer

How do I remove an altinator from a 2004 ford escape.


Hello there,
To replace the alternator in your car:
Open the Escape's hood, and examine the belt-routing diagram on the fan shroud. This will show you the location of the alternator and the serpentine belt tensioner.
Pull the serpentine belt tensioner away from the serpentine belt with the serpentine belt tool far enough to allow you to dislodge the belt from the alternator pulley with your other hand.
Unplug the wiring harness from the back of the alternator by hand. Remove the ground harness from the alternator with the socket set.
Unbolt the alternator from the alternator bracket with your socket set. Lift the old alternator out of the bracket by hand.
Compare the old alternator to the replacement alternator before installing the replacement. Make sure they're both physically identical before continuing. If not, take them both to the parts store to match up a proper replacement.
Set the replacement alternator in the alternator bracket by hand. Bolt it in with the socket set. Plug the wiring harness in by hand and bolt the ground harness to the back of the alternator with the socket set.
Install the serpentine belt on the replacement alternator in reverse of how you removed it from the old alternator.
All the best. Elect_Comp

Sep 13, 2011 | 2004 Ford Escape

1 Answer

Need a diagram for a serpentine belt for a 2002 ford escape 24 v DOHC V6


I did find your manual but it did not detail the serpentine belt. Here it is just FYI.
2002 Ford Escape Owners Manual

Mar 28, 2011 | 2002 Ford Escape

1 Answer

I need to replace the belt on the driver side of the 3.0 v6 motor. not the serp. belt on the passenger side. cannot locate part @ parts house-any suggestions. want to avoid dealership because of price if...


There are two belts on Ford Escape 3.0 V6. The serpentine belt is the drive-line belt and the other belt in question is the water pump belt. You should be able to find this at any auto parts store or on eBay.

Jan 25, 2011 | 2002 Ford Escape

2 Answers

Water Pump Drive Belt


a bunch of idiots - the guy is right there are 2 belts - one serpentine and one just for the water pump - you will need to remove the water pump and belt at the same time - if the belt is frayed then you can bet the water pump is close to shot too

Jun 23, 2009 | 2006 Ford Escape

1 Answer

Can't get belt back on


AutoZone has diagrams of serpentine and accessory belt routing for your model here.

Mar 08, 2009 | 2002 Ford Escape

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

620 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...