Question about 2004 Jeep Grand Cherokee

2 Answers

How to change fog light bulb on 2004 jeep grand cherokee

How to change fog light bulb on 2004 grand cherokee

Posted by on

  • piscator72 May 11, 2010

    have to remove inside fender, at least at bottom, to access back of bulb. requires removal of at least one plastic anchor.. easier to break it and replace?? bulb model number #9145?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

There's a small space behind inside fender. You can get your hand in there to grab and twist the back of the bulb to release it. You need a flashlight.

Posted on Mar 08, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 51 Answers

You have to crawl under the front of the vehicle and look at the back side of the light you will find the connector and the bulb

Posted on Jan 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i change the fog light bulb on a 1997 jeep grand cherokee


You have to go in from underneath the vehicle and behind the fog light assembly. It is a tight fit, but there is basically no other logical way to do it. Take the pigtail off the light and unscrew it from the assembly. Then do the opposite to reinstall.

Mar 28, 2011 | 1997 Jeep Grand Cherokee

1 Answer

I have a 2004 Jeep Grand Cherokee with the round fog lamps. Drivers side is not working, how do I acceess the bulb to replace it?


hi
if you remove the driver side wheel, look the the front of the wheel arch you will see a plastis cover around the wheel arch, pull out the round push-in fasteners at the front part only, the rear of the foglamp is situated there. there is a rubber cover that needs removed to access the bulb..
hope this helps

Feb 27, 2010 | 2004 Jeep Grand Cherokee

1 Answer

What size of bulb is my fog light? for a 1999 jeep grand cherokee


H3
Your auto part store should get it in stock.
warning Do not touch the bulb glass with your fingers or other oily surfaces. Reduced bulb life will result.
Hope it will help
Dan

Dec 24, 2009 | 2000 Jeep Grand Cherokee

2 Answers

My 2004 jeep grand cherokee's drivers side brake light goes out when i press the brakes with the head lights on but it. it works normal when the head lights are not on. any suggestions


I would suggest that you take a look here (I used this to correct brake-light issues on my '01):

http://www.topix.com/forum/autos/jeep-grand-cherokee/T63DRCOTUFKMHQ207

Many Grand Cherokees have had this type of issue. The thread is lengthy, but does cover just about every type of issue known with the tail/brake lights.

Dec 07, 2009 | 2004 Jeep Grand Cherokee

2 Answers

My brake lights have completely gone out at the


2004 jeep grand cherokee, brake lights do not work, no power at fuse cavity 23 and the fog lights are also out but the dash indicator is working.

Nov 30, 2009 | 2004 Jeep Grand Cherokee

1 Answer

Turn signals on my 2004 jeep don't work what to


If one of your bulbs has blown you will get a faster relay click when you activate the indicators. It sounds as though the relay itself could be sticking / broken.

Of course it could just be a blown fuse, I would check that first before changing relays

Nov 12, 2009 | 2004 Jeep Grand Cherokee

1 Answer

How do I change the buld on my fog light?


Jeep WJ 1999-2003 - Front Foglamp (#9055)

1379890.jpg

The foglamp bulbs can be accessed and removed from underneath the bumper without tools, although it is a tight fit. Turn the lamp socket 1/4 turn counter-clockwise to remove from the rear of the housing. Note that the screw in the front of the foglamps is for alignment only and does not remove the outer lens. The fog lamp housing is attached to the fascia with two nuts which can be removed with a 10mm socket.

Fog lamps can be added to most Laredo model WJ's that came from the factory without them. Mopar kits are available that include two fog lights, wiring harness, and steering column switch. Click HERE for part numbers and other information on these kits.


Jeep WJ 2004 - Front Foglamp (#9145)


fc74409.jpg


Good luck (rated this help).

Sep 10, 2009 | 2004 Jeep Grand Cherokee

1 Answer

Fogs lamps Grand cherokee 2004


check on the actual light switch you might have to pull or push on the end of it

Jun 19, 2009 | 2004 Jeep Grand Cherokee

1 Answer

Fog light bulb


in the bottom of the fog light is a cover held on by 2 screws...remove those screws and that should allow access to the bulb. this is per chrysler manual for 2001 cherokee factory installed fog lights

Nov 22, 2008 | 1999 Jeep Cherokee

Not finding what you are looking for?
2004 Jeep Grand Cherokee Logo

1,105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...