Question about 1998 Chevrolet K1500
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
The handle mechanism wears over time. I went on eBay, bought a color matching handle for under $20 and replaced it myself. You have to be careful when removing the plastic panel bezel that surrounds the handle, drill out two rivets and your door will open like new!
Posted on Nov 25, 2008
sounds like the linkage is disconnected from the latch unit. Becessary to remove the door trim to inspect and repaiir. Hope this helps
Posted on May 01, 2009
Take the handle off the third door with the two screws and look up in there with a light and see if the arms are off or just whats going on.. Holler if you need more. Jerry
Posted on May 13, 2009
SOURCE: This morning my 1999 Chevy
you must disarm the interior of the door to be able to accede to the plate and to check that the rods of the lock and the handle are in sequence
Posted on Sep 10, 2009
Remove screw from inside door grab handle. Remove door panel by carefully prying out plastic clips. Drill or chisel off pop rivets holding the handle on. Pull handle out far enough to disconnect linkage and remove handle. Install new handle and secure to metal panel with new pop rivets or sheet metal screws. It may be easier to reconnect linkages by removing the metal panel also.
Posted on Apr 26, 2010
Tips for a great answer:
Apr 12, 2013 | 1999 Chevrolet Silverado 1500
Feb 15, 2013 | Chevrolet Cars & Trucks
Dec 12, 2012 | 1998 Chevrolet Chevrolet silverado
May 07, 2010 | 1998 Chevrolet Suburban
Jul 12, 2009 | 1999 Chevrolet Silverado 1500
May 12, 2009 | 1998 Chevrolet C1500
May 01, 2009 | 1998 Chevrolet K1500
Dec 12, 2008 | 1999 Chevrolet Silverado 1500
443 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: