Question about 2003 Hyundai Tiburon

1 Answer

Key will not turn to lock position - 2003 Hyundai Tiburon

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Filmmaker:

    Uploaded 5 video answers.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 22 Answers

Your key seems to be worn-out.
You can use Plier to rotate it to lock position. Force is requiredand then use a new key or replacement key from local locksmith or Hyundai Dealer
You key has a sensor, see this video:


you can take out the sensor to reuse it in new shell, which will be significantly cheaper option

Posted on Nov 28, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I know if my ignition switch is bad ?


The electrical part or the key lock cylinder part ?
Ignition Key Cannot Be Removed from the Ignition Lock Cylinder
Did you review the Steering Wheel and Column Description and Operation and perform the necessary inspections?
Go to Step 2
Go to Steering Wheel and Column Description and Operation

2

Verify the key cannot be removed from the ignition lock cylinder.
Is the key stuck in the lock cylinder?
Go to Step 3
System OK

3

Is the vehicle equipped with a manual transmission?
Go to Step 6
Go to Step 4

4

Turn the ignition key to the OFF position.
Can the key be turned to the OFF position and be removed?
Go to Step 6
Go to Step 5

5

Verify the adjustment of the automatic transmission cable. Refer to Shift Control Linkage Adjustment in Automatic Transmission - 5L40-E/5L50-E.
System OK
Go to Step 6
Ignition Can/Cannot Be Turned Off with Transmission in Any Gear
Operate the system.
Does the system operate normally?
Go to Testing for Intermittent Conditions and Poor Connections
Go to Step 2

2

  1. Push the ignition lock cylinder control actuator release button which is on the underside of the ignition key cylinder.
  2. Turn the key to the OFF position and remove the key.
Were you able to turn the key to the OFF position and remove the key?
Go to Step 3
Go to Lock System Does Not Lock

3
  1. Turn OFF the ignition.
  2. Disconnect the ignition lock cylinder control actuator.
  3. Turn ON the ignition, with the engine OFF.
  4. Connect a test lamp between the battery positive voltage circuit and the ignition key/shifter interlock switch supply voltage circuit of the ignition lock cylinder control actuator with a test lamp.
Does the test lamp illuminate?
Go to Step 8
Go to Step 4

Aug 20, 2015 | 2006 Cadillac CTS

1 Answer

1999 Volvo S40 cannot remove key


What make vehicle ? Most all vehicles have a safety system .Don't try an force anything you'll break it !
Electronic Park Lock (EPL)/Ignition Lock Cylinder Control Actuator: If the vehicle is equipped with automatic transmission and a floor mounted console gear shift, it has an ignition lock cylinder control actuator system in the steering column. The ignition lock cylinder control actuator purpose is to prevent the ignition key from being turned to the OFF position when the transmission is in any position other than PARK and the vehicle may still be moving. The column ignition lock system consists of an ignition lock cylinder control actuator, and a park position switch that is located in the automatic transmission shift lock control switch. The ignition lock cylinder control actuator contains a pin that is spring loaded to mechanically prevent the ignition key cylinder from being turned to the lock position when the vehicle transmission is not in the PARK position. If vehicle power is lost, and/or the transmission is not in the PARK position the operator will not be able to turn the ignition key to the lock position and will not be able to remove the ignition key from the column. They also have this on column mounted shifters !

Aug 19, 2015 | Cars & Trucks

1 Answer

The Key FOB is stuck in the ignition. How can I get it to eject?


Most if not all vehicles have a Electronic Park Lock (EPL)/Ignition Lock Cylinder Control Actuator: If the vehicle is equipped with automatic transmission and a floor mounted console gear shift, it has an ignition lock cylinder control actuator system in the steering column. The ignition lock cylinder control actuator purpose is to prevent the ignition key from being turned to the OFF position when the transmission is in any position other than PARK and the vehicle may still be moving. The column ignition lock system consists of an ignition lock cylinder control actuator, and a park position switch that is located in the automatic transmission shift lock control switch. The ignition lock cylinder control actuator contains a pin that is spring loaded to mechanically prevent the ignition key cylinder from being turned to the lock position when the vehicle transmission is not in the PARK position. If vehicle power is lost, and/or the transmission is not in the PARK position the operator will not be able to turn the ignition key to the lock position and will not be able to remove the ignition key from the column. Or it has
Linear Shift Assembly: If the vehicle is equipped with a column mounted gear shift, it has a linear shift assembly on the steering column. The linear shift assembly has a cable that runs from the linear shift assembly to the ignition lock cylinder case. The purpose of this cable is to prevent the ignition key from being turned to the OFF position when the transmission is in gear and the vehicle may still be moving. The linear shift assembly cable contains a pin that is spring loaded to mechanically prevent the ignition key cylinder from being turned to the lock position when the vehicle transmission is not in the PARK position. If vehicle power is lost, and/or the transmission is not in the PARK position the operator will not be able to turn the ignition key to the lock position and will not be able to remove the ignition key from the column.
Your best bet is to take it to a ASE certified repair shop or the dealer ! The fix involves taking the steering column apart an or the floor shifter assembly ! Also electrical test to determine what is the problem !
Your

Jul 04, 2015 | 2008 Volvo S80

2 Answers

Key ignition wont turn


APPLY BRAKE AND MAKE SURE STEERING WHEEL IS CENTERED. IF IT IS PARKED SO THERE IS PRESSURE ON THE FRONT WHEELS AND HOLDING THE STEERING WHEEL HARD RIGHT OR LEFT IT WILL MAKE THE KEY VERY HARD TO TURN.

Mar 03, 2015 | 2009 Kia Optima LX

1 Answer

Having problem with the beeper for my honda pilot 2004 its not the bateries can't open the dors with beeper..


In the case the battery was drained in the keyfob - try reprogramming it.
Here are the instructions.

The process is pretty easy....1st) get in the vehicle and close all doors, windows, hood, and trunk.
2nd)put the key in the ignition and turn it to the second position...while in that position (w/out starting) push the lock button on the good key fob you already have. (if you don't already have a good fob, then press the lock button on the new key fob) (do this all w/in 5 seconds)
3rd)turn the key off
4th) turn the key on to the second position and press the lock button on the fob.
5th) turn the key off
6th) turn the key on to the second position and press the lock button on the fob.
7th) turn the key off.
8th) turn the key on to the second position and press the lock button the the fob.....the press the unlock button on the fob..........Now press the lock button on the new fob...press the unlock button on the new fob....
9th) tun the key off.....remove the key from the ignition and test to make sure that the new fob and the old fobs both work now.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Aug 06, 2010 | 2004 Honda Pilot

1 Answer

Key won't turn to lock position releasing the key


could be something else like the cable that releases the park ?? if it appears ok then renew the ignition lock ,nice job this one because its in the middle

Mar 24, 2010 | 2001 Saab 9-3

1 Answer

Ignition key switch


You have to use a pin or paper lip to insert in hole in igmition switch to release the lock cylinder. The key has to be in "on" position I think.

Removal
  1. Disconnect battery ground cable (14301) .
  1. Turn lock cylinder key to RUN position.
  1. Place a 3.17mm (1/8-inch) diameter wire pin or small drift punch in hole in upper steering column shroud (3530) under ignition switch . Press retaining pin while pulling out on ignition switch to remove it from lock cylinder housing (22074) .
Installation
  1. Install ignition switch by turning it to RUN position and pressing retaining pin. Insert ignition switch into lock cylinder housing . Ensure ignition switch is fully seated and aligned in interlocking washer before turning key to OFF position. This will permit cylinder retaining pin to extend into lock cylinder housing hole.
  1. Rotate ignition switch, using lock cylinder key, to ensure correct mechanical operation in all positions.
  1. Connect battery ground cable.
871404a.gif

Jan 13, 2009 | 1986 Ford Mustang

2 Answers

Resetting 1998 honda civic remote control


ok here is the porcedure that i have for it

Remember , these steps must be preformed within 5 seconds of eachother also all doors should be closed, radio and lights turned off

im not sure what you mean by a bypass, you can always just not use the remotes and go into the body control computer and turn off keyless entry

1) Unlock Doors
2) Turn ignition key to "ON" position (II)
3) Press the "LOCK" or "UNLOCK" button on the remote
4) Turn the ignition key to the "OFF" position (0, I)
5) Turn the ignition key to the "ON" position
6) Press lock or unlock
7) Turn key to off position
8) on position
9) lock or unlock
10) off position
11) on position
12)lock or unlock - doors should cycle to indicate successful programming. If you only have one remote, turn ignition to off or don't touch anything. if you have 2+ remotes, go to 13:
13) lock on each transmitter that you need to program

*Steps 2-12 must be performed within 5 seconds of each other. Step 13 can be performed within 10 seconds of step 12.

Nov 11, 2008 | 1998 Honda Civic

1 Answer

2002 oldmobile bravada ignition key is stuck in lock position


try and turn your steering wheel a little bit left or right and and the same time try and turn the key when it turns toward the dash then try and turn the key back. try and repeat this several times if neccessary. this should work. please rate this solution. thanks

Aug 30, 2008 | 2002 Oldsmobile Bravada

Not finding what you are looking for?
2003 Hyundai Tiburon Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...