Question about 1996 Dodge Caravan

Open Question

2000 dodge caravan 2.4 no communication through obd connector

All so no speedo and temp guage

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 422 Answers

SOURCE: 2000 dodge caravan

check the ground wire from the battery to engine, make sure it is tight at all connections.

Posted on Aug 24, 2008

Ad
txkjun
  • 409 Answers

SOURCE: 2000 dodge caravan

The check engine light on means there is a code stored in the ECM. You will have to have the OBD II system scanned and cleared. The other problem is probably just a blown fuse. If you need more help get back to me.

Posted on Dec 25, 2008

  • 76 Answers

SOURCE: Dual Temp on 2000 Dodge Caravan

Sounds like a "mode" door issue. Either the door is broken or the motor that operates it is faulty. There are very few wiring issues with these motors, so I'd guess the door motor. Unfortunatly, the door is located inside the heaterbox and is not accessable without dash and heaterbox removal. This is a job for a qualified technician as the a/c system must be drained first. If the problem is a motor, then some are accessable by removing the panels aound the heaterbox. Listen for the door movements while operating in a quiet setting. You should be able to hear the door move if the motor is operating. Listen close, it's quiet.
Hope this helps, let me know if I can do more.

Posted on Feb 20, 2009

  • 14036 Answers

SOURCE: 1996 dodge caravan no power to the obd connector

check fuse.

Posted on Apr 24, 2009

  • 79 Answers

SOURCE: obd 2 connector wiring 1999dodge dakota

You can get a repair connector at a dodge dealer. Maybe a junkyard will sell you one

Posted on Jun 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2000 dodge caravan none of the gauges work my tack. my temp my speedo and my fuel gauge can you help me how to fix this thanks dean


Check fuse for gauges. If ok, try banging on top of dash above instrument panel to see if they begin to work again. If they do, possible loose connection or defective cluster

Nov 11, 2015 | 2000 Dodge Caravan

1 Answer

Why wont obd communicate with diagnostic reader on 2000 dodge ram 1500 5.9


You have a bus communication problem. Start by checking all fuses. Next check all connectors. Specifically the pcm connectors and ground. These are located in the engine compartment on the passenger side behind air intake. I have ha 2-3 of these trucks need either a pcm or connector for open asd relay circuit issues.

Feb 09, 2015 | Dodge Cars & Trucks

1 Answer

The guages don't work, then, at any given time, they will just begin working. Nothing on the dash will work...no tach., speedo, temp, gas guage and automatic door locks...nothing. Then, out of the blue, as...


You have to remove the under hood fuse / relay box and disassemble , check for broken / corroded wires in the harness plugs at the bottom and broken solder joints at the board. I have repaired many of these for the same problem. hope this helps8c02778.jpg

Oct 15, 2010 | 1997 Dodge Caravan

2 Answers

1998 Dodge Grand Caravan SE Dashboard functioning intermitently


the most common cause of the poblems u are having is the Body Contro Module (known as the BCM) is defective, it is all to common a complaint, I believe you must have the new module programmed so the dealer will have to get invovled.

May 27, 2009 | 2000 Dodge Caravan

1 Answer

Rev counter, speedo & sometimes fuel & temp guage not working


pull the instrument cluster out and check the printed circuit and connector to it from harness, plug it in and out three or four times, this may cure the problem.

Apr 10, 2009 | Ford F Cars & Trucks

1 Answer

2003 grand caravan transmission will not shift out of low


it sounds as though your transmission input and output sensors are faulty.they are located on the driver side of transmission.input at front of trans.output at rear of transmission. normally if input sensor is faulty trans will stay in limp mode. if output sensor is faulty speedo will not register. they both resemble temp sensors with elec connectors

Feb 12, 2009 | 2003 Dodge Grand Caravan AWD

2 Answers

1994 DODGE INTREPID 3.3 WARM UP MISS OUT


sounds like a coil pac problem soon as these get hot they do what "YOU" described use OBD 2 scan tool to be positive good luck

Dec 23, 2008 | 1994 Dodge Intrepid

1 Answer

TEMP GUAGE TOO LOW


thermostat is sticking

Dec 08, 2008 | 2000 Dodge Caravan

1 Answer

2000 dodge caravan


The check engine light on means there is a code stored in the ECM. You will have to have the OBD II system scanned and cleared. The other problem is probably just a blown fuse. If you need more help get back to me.

Nov 05, 2008 | 2005 Dodge Caravan

1 Answer

2000 dodge caravan


check the ground wire from the battery to engine, make sure it is tight at all connections.

Aug 21, 2008 | 2000 Dodge Caravan

Not finding what you are looking for?
1996 Dodge Caravan Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...