Question about Cars & Trucks

1 Answer

How to remove the alternator from a 2001 Mazda tribute LVX 6 cyl 3.0 engine

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 1 Answer

Right ok firstly jack the car up put on axel stands take off the drivers side wheel then remove the plastic wheel arch cover then by the drive shaft you will see a bult which is located at the back of the alternater then undo the tentioner bolt which will be at the front of the alternater then at the bottm front part of the alternater there is another bult un do that to disconect the wires they might be bolted or clipped on then justpull it out from the back hope this was helpful

Posted on Nov 03, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Ajkill
  • 2035 Answers

SOURCE: 2001 mazda sunroof

Please click on this link:

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152801a7b5d

Good luck...

Posted on Aug 25, 2008

mrgreenz
  • 962 Answers

SOURCE: 2001 mazda tribute spark plug change

can 't you remove the coils insted of the intake ? It is much easier.

Posted on Dec 02, 2008

  • 2 Answers

SOURCE: What is the Firing order to find the #1 cylinder on Mazda Tribute

#1 cylinder is on the back of the motor first one to the ritght. On the driver's side. the cylinders go 1,2,3 fromright to left on the back of motor as stand facing the vehicle and 4,5,6 left to right in the front of the motor as you face the vehicle. Hope you understand what I'm telling you.
Good luck,Dan

Posted on Apr 17, 2009

MNfisherman
  • 11896 Answers

SOURCE: how do you remove a alternator from a 2001 mazda

First, disconnect battery, than remove cables from starter (you may want to make mark so you don't get them mixed up when reinstalling,
Than Remove the two bolts holding starter.
Now you can pull out from top by exhaust manifold or if you have room to move through crossmember

Posted on Jun 03, 2009

  • 14585 Answers

SOURCE: I changed the plugs on a 2001 mazda tribute v6

Switch the # 4 and #6 wires

Posted on Jun 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove the alternator in an 2001 Mazda Tribute 4 cylinder?


Disconnect battery , remove the driven belt,remove belt,remove wire and push in plug remove long bolt lift away from motor.

Aug 18, 2016 | 2001 Mazda Tribute

1 Answer

What is the firing order for a 2001 mazda tribute 6 cylinder spark plug and coil


Here's the information you are looking for:

Firing order 1-4-2-5-3-6
Location:
1 - 2 - 3

4 - 5 - 6
Front of Engine

Jun 02, 2016 | 2001 Mazda Tribute

2 Answers

Is number 1 plug at the back and where is the coil


The number one cylinder is always in the front of the engine.
The 4 cyl engine uses one coil for all 4 cylinders.
The 6 cyl engine uses one coil on each plug.

Apr 17, 2013 | 2002 Mazda Tribute

1 Answer

What is the 2001 mazda tribute 6 cyl alternator fuse called in the fuse box


It's the only 120 amp fuse. I think they call it the FB Fuse.

Jan 21, 2012 | 2001 Mazda Tribute

1 Answer

Mazda tribute firing order. I have miss fire in the # 5 but I dont have the order.


You didn't post your engine size so please pick the applicable diagram:

2001 Mazda Tribute DX 2WD
3.0 liter DOHC V-6

27a11e1.gif

2001 Mazda Tribute DX 4WD
2.0 liter DOHC L4

f205155.gif
2wd or 4wd...it is still the same for the V6.

Jul 14, 2009 | 2001 Mazda MPV

1 Answer

How do you remove a alternator from a 2001 mazda tribute 6 cylinder


First, disconnect battery, than remove cables from starter (you may want to make mark so you don't get them mixed up when reinstalling,
Than Remove the two bolts holding starter.
Now you can pull out from top by exhaust manifold or if you have room to move through crossmember

Jun 03, 2009 | 2001 Mazda Tribute

1 Answer

2001 mazda tribute spark plug change


can 't you remove the coils insted of the intake ? It is much easier.

Sep 28, 2008 | 2001 Mazda Tribute

1 Answer

REPAIR MANUAL NEEDED!!!!


The 2002, 2003 and 2004 Mazda MPV's all use the same Ford 6 cyl. 3.0 duratec engine. The Ford Escape and Mazda Tribute of those years use the same engine. Therefore if you need an inexpensive engine repair manuel for your 2002 MPV, get the Haynes ($20.00) 2001-2007 Escape/Tribute manuel. Mazda sells the a MPV shop manuel for $180.00. I also own a 2002 Mazda MPV LX. 75k miles.

Jun 16, 2008 | 2002 Mazda MPV

3 Answers

Replace alternator


I have a 2001 Mazda Tribute. To change the alternator; the factory procedure at the dealership says to drop the sub-frame from under the front of the vehicle. Then everything is accessable. The tech at the dealership told me how they do it: (Its not easy!!) 1. Remove the right front tire 2. Remove dust pan from right front 3. Remove the brake caliper and caliper bracket 4. Remove the 2 bolts from the half shaft support bracket 5. Remove the half shaft axle assembly 6. Remove the serpentine belt 7. Remove the 3 bolts holding the alternator in place 8. Remove the 3 bolts holding the alternator mounting bracket 9. Remove the alternator mounting bracket 10. Remove the electrical connection on the alternator 11. Remove the alternator by turning the alternator until it will come out of the opening 12. Repeat process in reverse for installation. I did this twice in two weeks because of a bad alternator. The studs that are spot welded on the half shaft bracket will try to keep you from being able to remove the alternator. The left stud on the bracket popped out, when we were removing the alternator and it seemed to make it easier to get the alternator out. I just put a lock washer on the back side of the stud when I mounted the half shaft and it worked fine. Good luck

May 15, 2008 | 2002 Mazda Tribute

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...