Question about 2007 Saturn Sky Red Line Convertible

Open Question

2007 saturn sky. Brake lights will not come on. Fuse ok. Blinkers ok

Power is getting to the fuse but not to the brake switch located on the brake pedal. Bulbs are good all other lights work fine.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 3940 Answers

SOURCE: 2001 pontiac sunfire with no brake lights

If the light in the spoiler works, the switch is good. Sounds like a bad ground to the light sockets

Posted on Sep 05, 2008

Ad
  • 1 Answer

SOURCE: No brake lights. Fuse good. Changed brake

this was a recall

Posted on Jun 13, 2009

  • 4 Answers

SOURCE: the brake lights on my 1999 saturn sl do not work.

are you sure the bulb is good?? my '99 SL1 had the same problem, neither lower brake light would come on but the tail lights worked just fine. And it's the same bulb. I thought that since the tail light lit up, the bulb must be good...

Wrong.

When I actually took one bulb out, i could see that it had two filaments. One was broken, the other good. so i replaced it and the new bulb worked. Replaced the one on the other side as well and have no more problem.

Posted on Jul 23, 2009

alicantecoli
  • 22156 Answers

SOURCE: 1992 Saturn SL all lights work fine accept the

fit new stop light switch

Posted on Aug 13, 2009

  • 881 Answers

SOURCE: blinkers not working on 99 saturn SL1 (hazards not

Its either a blown fuse or a relay but the first thing to check is the FLASHER UNIT it will be under the dashboard somewhere and when on and working you can hear a tick tick tick or a click and now you cannot
as the flasher can works both indecators and hazards.
So find it Fix it and away you go ..Have a goodday. Ron

Posted on Oct 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2006 brake light will not go out


Light gets power from brake light switch/.May be switch got shorted an brake light getting non-stop power causing it not to turn OFF brake light.

Get the brake light switch checked. Check volt at brake light switch.

It can be faulty brake light switch causing the problem or its wiring short for switch.

==========

To trouble shoot brake related problem, check the help links mentioned below:-----


Click the link:----

1996 Buick Regal Grand Sport Brake light Switch Location?

http://schematicsdiagram.blogspot.in/2012/04/1996-buick-regal-gran-sport-brake-light.html

-----------

No brake lights on Buick?

http://schematicsdiagram.blogspot.in/2012/04/no-brake-lights-on-buick.html

----------

Brake lights not working on 1989 BUICK REGAL?

http://schematicsdiagram.blogspot.in/2012/04/brake-lights-not-working-on-1989-buick.html

-------

How to replace Brake light switch on Chevrolet Tahoe?

http://technoanswers.blogspot.in/2012/02/how-to-replace-brake-light-switch-on.html

---------------

How to replace Parking, turn, and Brake Lights on car?

http://schematicsdiagram.blogspot.com/2011/06/how-to-replace-parking-turn-and-brake.html

----------

Upper brake lights work, but low brake light not working?

http://schematicsdiagram.blogspot.com/2011/12/upper-brake-lights-workbut-low.html

------------

1997 Cadillac Catera: How to replace Brake Light Switch?

http://howtobyme.blogspot.in/2012/06/1997-cadillac-catera-how-to-replace.html

------------

1996 Chrysler LHS brake light circuit wiring diagram?

http://technoanswers.blogspot.in/2012/02/1996-chrysler-lhs-brake-light-circuit.html

----------

How to replace rear Brake lights on 2004 Toyota RAV4?

http://schematicsdiagram.blogspot.in/2012/02/how-to-replace-rear-brake-lights-on.html

------------

One brake light on driver side not working, but other lights work?

http://schematicsdiagram.blogspot.com/2011/12/one-brake-light-on-driver-side-not.html

----------

2002 Lincoln Town car Fuse Box

http://schematicsdiagram.blogspot.com/2012/11/2002-lincoln-town-car-fuse-box.html

2007 KIA Rio: Brake Light Fuse Box Diagram?

http://repairhelpcenter.blogspot.in/2012/06/2007-kia-rio-brake-light-fuse-box.html

-------------

Overhead Brake lights not working on 1999 GMC Sierra 4x4?

http://technoanswers.blogspot.in/2012/03/overhead-brake-lights-not-working-on.html

---------

Brake lights not working

http://schematicsdiagram.blogspot.com/2012/11/brake-lights-not-working.html

-------

2004 Ford Mustang: Brake light Fuse Location?

http://howtobyme.blogspot.in/2012/05/2004-ford-mustang-brake-light-fuse.html

---------


These will help.

Thanks.

Nov 28, 2012 | Cars & Trucks

2 Answers

My brake lights and rear blinkers are not working. I have replaced the bulbs in both brake lights. What next?


most blinkers uses relays, and when they flashes fast one light is out, but you replaced your burnt bulb might be a bad relay.

Sep 17, 2012 | 2007 Hummer H2 SUT

1 Answer

My 2007 saturn sky brake lights stay on and cruise doesnt work


The brake light switch, located on the brake padal assembly, is and input to the cruise control module. When the switch fails keeping the lights on is makes the cruise control module think you are applying the brakes when infact you are not. Chek the switch wiring for damage and if ok replace the switch making sure you adjust it properly.

Jul 08, 2012 | 2008 Saturn Sky

2 Answers

I have a 1992 Buick La Sabre Custom. My brake lights are not working but taillights, turn signals and hazard lights do work. Switch ok. fuse ok. ????????


if your fuse is good. and you have power at the brake light switch and when you hit the brakes you have power coming out the otherside of brake light switch/which would be the white wire/ check that the white wire is sending power up the turn signal switch. if theres power there and your turnsignals work? im afraid that your turnsignal switch is bad rare but it has been known to happen.

Jan 27, 2011 | 1992 Buick LeSabre

1 Answer

94 gmc pick up pops brake fuse right away changed brake light switch and blinkers and tail lights still work y no 4ways or brake lights??


Check your brake light switch located under the dash on the top of your brake pedal,also it could be a broken tail or brake lite bulb.

Jan 22, 2011 | 1995 GMC Yukon

3 Answers

2007 chevy silverado brake lights dont work but the one above bed and blinkers and tail lights do work


I had the same problem! I used a piece of wood to keep the break pedal depressed and then started to remove one of the break lamps and to my surprise it came on! Same thing on the other side. So I did not seat (bottom out) the lamps in their sockets and both break light are now working properly. I had a similar issue last spring but that time only one light was out. I put in a new bulb and it still did not work so I messed around with it a little more and it started working. Never did figure it out until now. Hope this helps!

Mar 16, 2010 | 2007 Chevrolet Silverado 1500 2WD

1 Answer

2006 Sonata brake lights don't work except rear deck light.


Check the connection at the brake light switch for power comming out to the barke lights,try feeding power to the brake lights manualy using a jumper wire from your fuse box or battery,unplug the wire from the switch and put power to the harness if everything is OK the brake lights will work,then you need a new switch.

Jul 25, 2009 | 2007 Hyundai Sonata Limited Sedan

3 Answers

Brake lights do not work All bulbs have been replaced.


Troubleshooting Procedures - Read Completely Before Beginning
(American Car) All Brake Lights Not Working
  • Check System Fuse: A fuse is used to protect the brake light circuit from amperage overload. If the fuse has failed it will not allow the electrical current to continue to the brake lights. To check the fuse, first locate the brake light system fuse in the fuse panel which is either under the dash or under the hood in the power distribution center. Connect the test light to a ground like an engine or dash bracket and turn the ignition key to the "on" position. Using the test light probe both sides of the fuse. If the test light illuminates on both sides the fuse is ok continue onto the next step. If one side of the fuse illuminates the fuse has failed and needs to be replaced. If the fuse fails as soon as it is replaced or when you apply the brake pedal the brake light electrical circuit is shorted to ground. Rarely a system short can occur, a car repair manual is needed to find the wiring schematic for the brake light circuit. Once the brake light wiring has been located inspect and repair as needed.
  • Check Brake Light Bulbs: All cars have three brake light bulbs that create the brake light illumination affect. If all of these brake light bulbs fail no brake light operation will occur. I know what you're thinking, you might say all three brake lights at once? But in reality one brake light went out at a time and you did not notice. People only tend to notice something when they almost run into the back of your car to help persuade them to inform you the brake lights aren't working. Remove any of the brake light bulbs to confirm the bulb is ok or burned. After the bulb has been removed inspect the filament and replace if failed. If the brake light bulbs are ok continue to the next step.
  • Checking the Brake Light Switch: A control switch is used to connect the brake light electrical circuit. This switch is located near the brake pedal lever. Basic switches have just two wires, power in and power out to the turn signal switch. Use a test light that is grounded and with the key in the "on" position test for power at one side (wire) of the switch, then press the brake pedal while testing the opposite side (wire). It should illuminate the test light, if electrical power is connected through the switch go to the next step. If no power is detected through the switch the brake light switch has failed and replacement is required. If your car is equipped with more than two wires integrated into the brake light switch a car repair manual is needed to locate the proper brake light circuit wiring.

Jul 07, 2009 | 2000 Jeep Grand Cherokee

2 Answers

Turn signals work but the brake lights do not how do i get them to work? i already changed the flasher.


I have a 2001 Ford F150, my brake lights dont work. Ive replaced the bulbs, checked the fuses,and the brake switch on side of the brake pedal was replaced. I still dont have any brake lights. My third brake light works fine, along with my running lights,flashers, blinkers.

Jun 18, 2009 | 1985 Ford F150

1 Answer

No Brake Lights?!?


There is brake light switch located under the dash. It is inserted in a metal bracket that is a part of the brake pedal assembly. When you depress the brake pedal the pedal arm moves away from the brake switch allowing a spring loaded plunger to move out of the switch. As the plunger moves out of the switch a set of contacts close in the switch and turn the brake lights on.

You stated the 10amp under hood brake light fuse is good so check to see if you have power on the "orange" wire at the brake switch with pedal all the way up. Then press the pedal down and you should have power on the " light blue" wire going out of the switch.

We will start there, let me know what you find.
Regards,

May 01, 2009 | Saturn Vue Cars & Trucks

Not finding what you are looking for?
2007 Saturn Sky Red Line Convertible Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...